High heat flux tests in support of the 3-D computational modeling of melting for the EU-DEMO first wall limiters

The EU-DEMOnstration fusion power plant (DEMO) first wall protection strategy relies on limiter components to face both normal and off-normal plasma transient events. The heat loads during these events are likely to damage the breeding blanket’s first wall otherwise. Since W is the preferred plasma-facing material for EU-DEMO, the plasma-facing component design of the limiters follows considerations based on heat transfer in solids undergoing phase transition. The understanding of this problem has paved the way for a 1-D thermal modeling in MATLAB Thermal Analysis foR Tracking InterFaces under meLting&vaporizaTion-induced plasma Transient Events (TARTIFL&TTE), which has then been improved and extended to 3-D geometries within a Multiphysics environment. Hence, the 3-D TARTIFL&TTE implementation in COMSOL Multiphysics. Although the validation has already started against some data available in the literature and described in the companion paper, dedicated experiments are performed in the Garching LArge DIvertor Sample Test Facility (GLADIS) for melting studies. Carried out as a joint activity between EUROfusion and U.K. Atomic Energy Authority (UKAEA), the aim of these experiments is generating a traceable and controlled experimental database in support of heat transfer studies in solid components undergoing phase transition. The data are here used in support of the 3-D TARTIFL&TTE validation benchmark. To broaden the database, three different materials are chosen, i.e., TZM, W, and SS-316 grade. The requirements defining the experiments comply with the hypotheses behind 3-D TARTIFL&TTE, for it to be able to reproduce the experiments. Therefore, a uniform heat flux on the loaded surface is provided by the H neutral beam on the footprint, and loading time and heat flux magnitude are chosen such that only melting is reached. This allows the liquid metal to stay in place once formed. No attempts to reach vaporization are made, since the vertical position of the target promotes the molten layer sliding under gravity effects. Measured and modeled results (temperature, absorbed energy, and melt layer depth) show good agreement during the melting phase. As a stepwise benchmark, validation will be also sought under vaporization events. Future work is focused on addressing this last point

Mechanical support concept of the DEMO breeding blanket

The DEMO tokamak architecture is based on large vertical breeding blanket (BB) segments that are accessed from a maintenance hall above the tokamak and are vertically replaced through large upper ports of the vacuum vessel (VV). The feasibility of the BB segments mechanical supports is a prerequisite of this vertical segment architecture. Their design directly impacts on the removal kinematics and the remote handling operations required for release and engagement. The supports must withstand large forces acting on the BB in particular due to electromagnetic (EM) loads. At the same time, they must ensure a sufficiently precise positioning of the BB first wall. Their design also takes into account the significant thermal expansion of the blanket segments that are operated at high temperature avoiding excessive support reaction forces. The BB support concept described in this article does not require fasteners or electrical straps to the VV and therefore much reduces the complexity of the BB remote replacement – a valuable characteristic that would make this concept a milestone in meeting one of the goals defined for the DEMO project: to develop a maintainable fusion power plant design [1]. Each blanket segment is individually supported by the VV without any physical contact to the other blankets or in-vessel components. It relies instead on vertical pre-compression inside the VV due to obstructed thermal expansion and radial pre-compression due to the ferromagnetic force acting on the BB material in the toroidal magnetic field. The verification process did not identify show stoppers. Nonetheless, a further evolution of the concept is required including design improvements to mitigate the high stress levels found in the inboard blankets during plasma disruptions. The fact that no excessively high support reaction forces or large BB deflections were found suggests though that the further development of the concept could be successful

Modelling of the effect of ELMs on fuel retention at the bulk W divertor of JET

Effect of ELMs on fuel retention at the bulk W target of JET ITER-Like Wall was studied with multi-scale calculations. Plasma input parameters were taken from ELMy H-mode plasma experiment. The energetic intra-ELM fuel particles get implanted and create near-surface defects up to depths of few tens of nm, which act as the main fuel trapping sites during ELMs. Clustering of implantation-induced vacancies were found to take place. The incoming flux of inter-ELM plasma particles increases the different filling levels of trapped fuel in defects. The temperature increase of the W target during the pulse increases the fuel detrapping rate. The inter-ELM fuel particle flux refills the partially emptied trapping sites and fills new sites. This leads to a competing effect on the retention and release rates of the implanted particles. At high temperatures the main retention appeared in larger vacancy clusters due to increased clustering rate

The role of ETG modes in JET-ILW pedestals with varying levels of power and fuelling

We present the results of GENE gyrokinetic calculations based on a series of JET-ITER-like-wall (ILW) type I ELMy H-mode discharges operating with similar experimental inputs but at different levels of power and gas fuelling. We show that turbulence due to electron-temperature-gradient (ETGs) modes produces a significant amount of heat flux in four JET-ILW discharges, and, when combined with neoclassical simulations, is able to reproduce the experimental heat flux for the two low gas pulses. The simulations plausibly reproduce the high-gas heat fluxes as well, although power balance analysis is complicated by short ELM cycles. By independently varying the normalised temperature gradients (omega(T)(e)) and normalised density gradients (omega(ne )) around their experimental values, we demonstrate that it is the ratio of these two quantities eta(e) = omega(Te)/omega(ne) that determines the location of the peak in the ETG growth rate and heat flux spectra. The heat flux increases rapidly as eta(e) increases above the experimental point, suggesting that ETGs limit the temperature gradient in these pulses. When quantities are normalised using the minor radius, only increases in omega(Te) produce appreciable increases in the ETG growth rates, as well as the largest increases in turbulent heat flux which follow scalings similar to that of critical balance theory. However, when the heat flux is normalised to the electron gyro-Bohm heat flux using the temperature gradient scale length L-Te, it follows a linear trend in correspondence with previous work by different authors

Spectroscopic camera analysis of the roles of molecularly assisted reaction chains during detachment in JET L-mode plasmas

The roles of the molecularly assisted ionization (MAI), recombination (MAR) and dissociation (MAD) reaction chains with respect to the purely atomic ionization and recombination processes were studied experimentally during detachment in low-confinement mode (L-mode) plasmas in JET with the help of experimentally inferred divertor plasma and neutral conditions, extracted previously from filtered camera observations of deuterium Balmer emission, and the reaction coefficients provided by the ADAS, AMJUEL and H2VIBR atomic and molecular databases. The direct contribution of MAI and MAR in the outer divertor particle balance was found to be inferior to the electron-atom ionization (EAI) and electron-ion recombination (EIR). Near the outer strike point, a strong atom source due to the D+2-driven MAD was, however, observed to correlate with the onset of detachment at outer strike point temperatures of Te,osp = 0.9-2.0 eV via increased plasma-neutral interactions before the increasing dominance of EIR at Te,osp < 0.9 eV, followed by increasing degree of detachment. The analysis was supported by predictions from EDGE2D-EIRENE simulations which were in qualitative agreement with the experimental observations

Shattered pellet injection experiments at JET in support of the ITER disruption mitigation system design

A series of experiments have been executed at JET to assess the efficacy of the newly installed shattered pellet injection (SPI) system in mitigating the effects of disruptions. Issues, important for the ITER disruption mitigation system, such as thermal load mitigation, avoidance of runaway electron (RE) formation, radiation asymmetries during thermal quench mitigation, electromagnetic load control and RE energy dissipation have been addressed over a large parameter range. The efficiency of the mitigation has been examined for the various SPI injection strategies. The paper summarises the results from these JET SPI experiments and discusses their implications for the ITER disruption mitigation scheme

New H-mode regimes with small ELMs and high thermal confinement in the Joint European Torus

New H-mode regimes with high confinement, low core impurity accumulation, and small edge-localized mode perturbations have been obtained in magnetically confined plasmas at the Joint European Torus tokamak. Such regimes are achieved by means of optimized particle fueling conditions at high input power, current, and magnetic field, which lead to a self-organized state with a strong increase in rotation and ion temperature and a decrease in the edge density. An interplay between core and edge plasma regions leads to reduced turbulence levels and outward impurity convection. These results pave the way to an attractive alternative to the standard plasmas considered for fusion energy generation in a tokamak with a metallic wall environment such as the ones expected in ITER.& nbsp;Published under an exclusive license by AIP Publishing

Testing a prediction model for the H-mode density pedestal against JET-ILW pedestals

The neutral ionisation model proposed by Groebner et al (2002 Phys. Plasmas 9 2134) to determine the plasma density profile in the H-mode pedestal, is extended to include charge exchange processes in the pedestal stimulated by the ideas of Mahdavi et al (2003 Phys. Plasmas 10 3984). The model is then tested against JET H-mode pedestal data, both in a 'standalone' version using experimental temperature profiles and also by incorporating it in the Europed version of EPED. The model is able to predict the density pedestal over a wide range of conditions with good accuracy. It is also able to predict the experimentally observed isotope effect on the density pedestal that eludes simpler neutral ionization models