Assessing the extent of occurrence, area of occupancy, territory size, and population size of marsh tapaculo (Scytalopus iraiensis)

Evaluación de la extensión de presencia, la superficie de ocupación, el tamaño del territorio y el tamaño de la población del churrín palustre (Scytalopus iraiensis) Descrito por primera vez en 1998, el churrín palustre (Scytalopus iraiensis) es un ave en peligro de extinción de la familia Rhinocryptidae. Es endémica de Brasil y su presencia queda restringida a los planos aluviales de los ríos y los cursos de agua. Debido a sus hábitos crípticos y a los ambientes en los que se halla presente, la información disponible sobre su biología, su historia natural y su distribución es escasa. Compilamos varios registros de presencia (99 registros), delimitamos la extensión de las presencias (296.584 km2), calculamos la superficie de ocupación (84 km2) y estimamos el tamaño del territorio (5.313 ± 1.201 m2 por pareja), la densidad de la población (3,76 ± 0,85 individuos por hectárea) y el tamaño de la población (31.584 ± 7.140 individuos maduros) del churrín palustre. La especie se registró en zonas de marismas asociada a cuatro tipos de vegetación y en cuatro zonas ecológicas. Esta nueva información es fundamental para respaldar la reevaluación de la categoría de situación de peligro de la especie y potenciar el conocimiento de esta ave endémica y poco conocida de Brasil

Experimental observation of two-dimensional fluctuation magnetization in the vicinity of T_c for low values of the magnetic field in deoxygenated YBa_2Cu_3O_{7-x}

We measured isofield magnetization curves as a function of temperature in two single crystal of deoxygenated YBaCuO with T_c = 52 and 41.5 K. Isofield MvsT were obtained for fields running from 0.05 to 4 kOe. The reversible region of the magnetization curves was analyzed in terms of a scaling proposed by Prange, but searching for the best exponent $\upsilon$. The scaling analysis carried out for each data sample set with $\upsilon$=0.669, which corresponds to the 3D-xy exponent, did not produced a collapsing of curves when applied to MvsT curves data obtained for the lowest fields. The resulting analysis for the Y123 crystal with T_c = 41.5 K, shows that lower field curves collapse over the entire reversible region following the Prange's scaling with $\upsilon$=1, suggesting a two-dimensional behavior. It is shown that the same data obeying the Prange's scaling with $\upsilon$=1 for crystal with T_c = 41.5 K, as well low field data for crystal with $T_c$ = 52 K, obey the known two-dimensional scaling law obtained in the lowest-Landau-level approximation.Comment: 4 pages, 3 figure

Arithmetic fuchsian groups and space time block codes

In the context of space time block codes (STBCs) the theory of arithmetic Fuchsian groups is presented. Additionally, in this work we present a new class of STBCs based on arithmetic Fuchsian groups. This new class of codes satisfies the property full-diversity, linear dispersion and full-rate. Mathematical subject classification: 18B35, 94A15, 20H10

Is it necessary to soak rice grains to prepare Rhizoctonia solani AG-4 inoculum?

A study was conducted to evaluate the effects on the development of root rot on common bean, cv. 'Dufrix' after treatment with four volumes of water (0, 30%, 60%, and 90%, v/w) added to rice grains previously immersed in water for 24 hours before autoclaving and colonization of grains by Rhizoctonia solani AG-4. Colonized rice grains and non-infested rice grains were mixed in pots with sterilized soil and sand (2:1), where beans were sown. Based on results of area under plant emergence curve, plant height, plant dry weight, and disease severity, we conclude that inoculum is more effective in causing disease when no water is added to the rice grains before autoclaving.CNPqFAPEMI

One-to-one full scale simulations of laser wakefield acceleration using QuickPIC

We use the quasi-static particle-in-cell code QuickPIC to perform full-scale, one-to-one LWFA numerical experiments, with parameters that closely follow current experimental conditions. The propagation of state-of-the-art laser pulses in both preformed and uniform plasma channels is examined. We show that the presence of the channel is important whenever the laser self-modulations do not dominate the propagation. We examine the acceleration of an externally injected electron beam in the wake generated by 10 J laser pulses, showing that by using ten-centimeter-scale plasma channels it is possible to accelerate electrons to more than 4 GeV. A comparison between QuickPIC and 2D OSIRIS is provided. Good qualitative agreement between the two codes is found, but the 2D full PIC simulations fail to predict the correct laser and wakefield amplitudes.Comment: 5 pages, 5 figures, accepted for publication IEEE TPS, Special Issue - Laser & Plasma Accelerators - 8/200

Fatigue in disordered media

We obtain the Paris law of fatigue crack propagation in a disordered solid using a fuse network model where the accumulated damage in each resistor increases with time as a power law of the local current amplitude. When a resistor reaches its fatigue threshold, it burns irreversibly. Over time, this drives cracks to grow until the system is fractured in two parts. We study the relation between the macroscopic exponent of the crack growth rate -- entering the phenomenological Paris law -- and the microscopic damage-accumulation exponent, $\gamma$, under the influence of disorder. The way the jumps of the growing crack, $\Delta a$, and the waiting-time between successive breaks, $\Delta t$, depend on the type of material, via $\gamma$, are also investigated. We find that the averages of these quantities, and $/$, scale as power laws of the crack length $a$, $ \propto a^{\alpha}$ and $/ \propto a^{-\beta}$, where is the average rupture time. Strikingly, our results show, for small values of $\gamma$, a decrease in the exponent of the Paris law in comparison with the homogeneous case, leading to an increase in the lifetime of breaking materials. For the particular case of $\gamma=0$, when fatigue is exclusively ruled by disorder, an analytical treatment confirms the results obtained by simulation

Spectra of weighted algebras of holomorphic functions

We consider weighted algebras of holomorphic functions on a Banach space. We determine conditions on a family of weights that assure that the corresponding weighted space is an algebra or has polynomial Schauder decompositions. We study the spectra of weighted algebras and endow them with an analytic structure. We also deal with composition operators and algebra homomorphisms, in particular to investigate how their induced mappings act on the analytic structure of the spectrum. Moreover, a Banach-Stone type question is addressed.Comment: 25 pages Corrected typo

Reliability and Test-Retest Agreement of Mechanical Variables Obtained During Countermovement Jump

International Journal of Exercise Science 13(4): 6-17, 2020. The countermovement jump (CMJ) is often used as performance measure and monitoring tool. Traditionally, jump height (JH) is most often studied and reported, but other variables (e.g. force, velocity, power) can also be obtained during CMJ testing on a force plate. The aim of this study was to determine the intra-rater reliability of mechanical variables obtained during CMJs. For this, 41 physically active men (24 ± 4 years) performed four CMJs on a force plate with an interval of 48 to 168 hours (test-retest design). Six variables were analyzed: 1) jump height (JH), 2) peak force (PF), 3) peak power (PP), 4) velocity at takeoff (VTO), 5) rate of force (RFD) and 6) power (RPD) development. Five variables showed to be reliable (i.e. CV \u3c 10%), except RFD (CV of 12.9%). Although JH exhibited an acceptable level of reliability (r= 0.94 and CV = 5.8%), better scores were observed for PF, VTO, and PP (CV ranging from 2.5 to 5.1%). The PF showed the best reliability scores (r= 0.99 and CV = 2.5%) and RPD, a relatively unexamined variable compared to the others, showed an acceptable level of reliability (r= 0.96 and CV = 7.8%). Therefore, JH, PF, PP, VTO, and RPD demonstrated acceptable scores of reliability. PF seems to be the most appropriate variable to use when small changes in performance are expected. Future studies should investigate the importance of RPD for performance evaluation

THERMAL PERFORMANCE AND FLAME TEMPERATURES ON LPG RADIAL BURNERS IN DOMESTIC COOKERS

The objective is to investigate radial burners through experimental tests, looking for its thermal performance behavior. Gas burners in domestic cookers operate on LPG, typically with two different geometries and five thermal power conditions. Usually, those thermal equipment lacks information on its whole operating conditions range for higher energy conversion efficiency and lower fuel consumption; it is not pointed out by the manufacturer or by energy efficiency labeling, what could result in a recommendation for widely effective performance. Appropriate instrumentation was used to carry out the measurements and methodology used as a guideline regulations from INMETRO/CONPET, ABNT - Brazilian Technical Standards Normative, and ANP - National Agency of Petroleum, Natural Gas and Biofuels. Experimental measurements and uncertainties are for the following parameters: fuel mass consumption (kg.s-1), test time elapsed (s), temperature (°C), water mass (kg) and flame temperature by K-type thermocouples (quantitative) and a thermal camera (qualitative). Main conclusions are: a) Operating domestic cookers with handle position selector on middle position (TP3) provides almost the same temperature rise as maximum fuel consumption (TP5), i.e., ΔT in the water container; b) Heat is better transferred (Qgas → Qwater) with the handle position selector fully opened (TP5@B1) and just before fully opening (TP4@B2); c) A non-linear behavior occurs for ηThermal, when moving forward the handle position selector; maximum efficiency occurs at fully open (TP5@B2) and middle opening (TP3@B1); d) Higher values for TPexperimental occurs for B2, in comparison to B1, in whole operational condition ranges; differences are mainly due to geometric parameters (ARB2/ARB1~0.82). In general, B2 has a better geometric design; e) Uncertainty analysis indicate values lower than ±3%, proving to be a suitable methodology for the experimental results in this work; f) Flame temperatures are entirely consistent with both, ηThermal and heat energy delivered, reaching higher temperature values at TP4 for both burners; 751.5°C (B1) and 830.7°C (B2)