Do ultrafast exciton-polaron decoherence dynamics govern photocarrier generation efficiencies in polymer solar cells?

All-organic-based photovoltaic solar cells have attracted considerable attention because of their low-cost processing and short energy payback time. In such systems the primary dissociation of an optical excitation into a pair of photocarriers has been recently shown to be extremely rapid and efficient, but the physical reason for this remains unclear. Here, two-dimensional photocurrent excitation spectroscopy, a novel non-linear optical spectroscopy, is used to probe the ultrafast coherent decay of photoexcitations into charge-producing states in a polymer:fullerene based solar cell. The two-dimensional photocurrent spectra are interpreted by introducing a theoretical model for the description of the coupling of the electronic states of the system to an external environment and to the applied laser fields. The experimental data show no cross-peaks in the two-dimensional photocurrent spectra, as predicted by the model for coherence times between the exciton and the photocurrent producing states of 20\,fs or less

Exploring the origin of high optical absorption in conjugated polymers

Vezie, Michelle S. et al.The specific optical absorption of an organic semiconductor is critical to the performance of organic optoelectronic devices. For example, higher light-harvesting efficiency can lead to higher photocurrent in solar cells that are limited by sub-optimal electrical transport. Here, we compared over 40 conjugated polymers, and found that many different chemical structures share an apparent maximum in their extinction coefficients. However, a diketopyrrolopyrrole-thienothiophene copolymer shows remarkably high optical absorption at relatively low photon energies. By investigating its backbone structure and conformation with measurements and quantum chemical calculations, we find that the high optical absorption can be explained by the high persistence length of the polymer. Accordingly, we demonstrate high absorption in other polymers with high theoretical persistence length. Visible light harvesting may be enhanced in other conjugated polymers through judicious design of the structure.M.S.V. and S. F. are grateful to the Engineering and Physical Sciences Research Council (EPSRC) for a doctoral training award and a CDT studentship (EP/G037515/1) respectively. G.P. and S.C.H. acknowledge the University of Cyprus for funding through the internal grant "ORGANIC". B.D., A.G. and M.C.Q. acknowledge financial support from the Ministerio de Economía y Competitividad of Spain through projects CSD2010–00044 (Consolider NANOTHERM), SEV-2015_0496 and MAT2012–37776 and the European Research Council through project ERC CoG648901. I.M., R.S.A. and I.McC. acknowledge support from the European Commission FP7 Project ArtESun (604397). J.N. is grateful to the Royal Society for a Wolfson Merit Award, and acknowledges financial support from EPSRC grants EP/K030671/1, EP/K029843/1 and EP/J017361/1. The authors thank Dr. Isabel Alonso for performing supplementary ellipsometric measurements; we thank Prof. Thomas Kirchartz, Dr. Jarvist Moore Frost, Dr. Christian Müller and Dr. Isabel Alonso for helpful discussions.Peer reviewe

Understanding the effect of unintentional doping on transport optimization and analysis in efficient organic bulk-heterojunction solar cells

In this paper, we provide experimental evidence of the effects of unintentional p-type doping on the performance and the apparent recombination dynamics of bulk-heterojunction solar cells. By supporting these experimental observations with drift-diffusion simulations on two batches of the same efficient polymer-fullerene solar cells with substantially different doping levels and at different thicknesses, we investigate the way the presence of doping affects the interpretation of optoelectronic measurements of recombination and charge transport in organic solar cells. We also present experimental evidence on how unintentional doping can lead to excessively high apparent reaction orders. Our work suggests first that the knowledge of the level of dopants is essential in the studies of recombination dynamics and carrier transport and that unintentional doping levels need to be reduced below approximately 7 × 1015 cm-3 for full optimization around the second interference maximum of highly efficient polymer-fullerene solar cells.F. D. and J. R. D. are thankful of the support from the EPSRC APEX Grant No. EP/H040218/2 and SPECIFIC Grant No. EP/1019278. T. K. acknowledges funding by an Imperial College Junior Research Fellowship. We are grateful to the Ministerio de Economa y Competitividad for funding through the project PHOTOCOMB, Reference No. MAT2012-37776.Peer Reviewe

Exploring the origin of high optical absorption in conjugated polymers

The specific optical absorption of an organic semiconductor is critical to the performance of organic optoelectronic devices. For example, higher light-harvesting efficiency can lead to higher photocurrent in solar cells that are limited by sub-optimal electrical transport. Here, we compare over 40 conjugated polymers, and find that many different chemical structures share an apparent maximum in their extinction coefficients. However, a diketopyrrolopyrrole-thienothiophene copolymer shows remarkably high optical absorption at relatively low photon energies. By investigating its backbone structure and conformation with measurements and quantum chemical calculations, we find that the high optical absorption can be explained by the high persistence length of the polymer. Accordingly, we demonstrate high absorption in other polymers with high theoretical persistence length. Visible light harvesting may be enhanced in other conjugated polymers through judicious design of the structure

Première évaluation du risque toxique lié aux cyanobactéries d'eau douce en France : le programme " EFFLOCYA "

Une enquête menée à l'aide d'un questionnaire couvrant l'ensemble du territoire français ainsi que l'étude spécifique d'écosystèmes aquatiques de type lacs et réservoirs ont permis de montrer que les proliférations de cyanobactéries toxiques pouvaient a priori affecter n'importe quel plan d'eau de l'Héxagone. Les genres rencontrés responsables de la production de toxines, le plus souvent hépatiques, sont Microcystis, Planktothrix, Anabœna et Cylindrospermopsis.Les efflorescences peuvent se produire tout au long de l'année car certaines espèces sont adaptées aux eaux froides et elles ne sont pas liées de manière univoque à un état eutrophe de l'écosystème.La production toxinique est la plus élevée lorsque les populations cyanobactériennes sont peu ou pas diversifiées et à la lumière de travaux récents, cette production serait favorisée, en ce qui concerne les microcystines, par un milieu riche en nitrate, pauvre en ammonium et fortement carencé en fer.La suite à donner à ce travail pourrait être la création d'un observatoire national des efflorescences toxiques.An inquiry covering the whole French territory together with specific studies of natural and artificial reservoirs has been made to assess the human health risk related to the prolifération of toxin producing blue green algae (cyanobacteria). The conclusions show that any lentic ecosystem can be affected like it has been shown already in other countries all over the world and more specifically within the EU. The main genus concemed are: Microcystis, Planktothrix, Anabœna and Cylindrospermopsis.Blooms can occur juring the whole year since some species are well adapted to cold water and are not clearly linked with the trophic status of the aquatic ecosystem.The toxinic production is the largest when the cyanobacteria populations contain only a few number of species. The results of recent works are well correlated with our findings which show that the production of toxic heptapeptides (microcystins) could be correlated with high levels of nitrate and depletions of ammonium and iron.The follow up of this work should now include the set up of a national observatory of toxic algal blooms

Impact of Marginal Exciton-Charge-Transfer State Offset on Charge Generation and Recombination in Polymer:Fullerene Solar Cells

The energetic offset between the initial photoexcited state and charge-transfer (CT) state in organic heterojunction solar cells influences both charge generation and open-circuit voltage (Voc). Here, we use time-resolved spectroscopy and voltage loss measurements to analyze the effect of the exciton–CT state offset on charge transfer, separation, and recombination processes in blends of a low-band-gap polymer (INDT-S) with fullerene derivatives of different electron affinity (PCBM and KL). For the lower exciton–CT state offset blend (INDT-S:PCBM), both photocurrent generation and nonradiative voltage losses are lower. The INDT-S:PCBM blend shows different excited-state dynamics depending on whether the donor or acceptor is photoexcited. Surprisingly, the charge recombination dynamics in INDT-S:PCBM are distinctly faster than those in INDT-S:KL upon excitation of the donor. We reconcile these observations using a kinetic model and by considering hybridization between the lowest excitonic and CT states. The modeling results show that this hybridization can significantly reduce Voc losses while still allowing reasonable charge generation efficiency

A general mechanism for controlling thin film structures in all-conjugated block copolymer : fullerene blends

Block copolymers have the potential to self-assemble into thermodynamically stable nanostructures that are desirable for plastic electronic materials with prolonged lifetimes. Fulfillment of this potential requires the simultaneous optimisation of the spatial organisation and phase behaviour of heterogeneous thin films at the nanoscale. We demonstrate the controlled assembly of an all-conjugated diblock copolymer blended with fullerene. The crystallinity, nanophase separated morphology, and microscopic features are characterised for blends of poly(3-hexylthiophene-block-3-(2-ethylhexyl) thiophene) (P3HT-b-P3EHT) and phenyl-C61-butyric acid methyl ester (PCBM), with PCBM fractions varying from 0–65 wt%. We find that PCBM induces the P3HT block to crystallise, causing nanophase separation of the block copolymer. Resulting nanostructures range from ordered (lamellae) to disordered, depending on the amount of PCBM. We identify the key design parameters and propose a general mechanism for controlling thin film structure and crystallinity during the processing of semicrystalline block copolymers

The Neutron star Interior Composition Explorer (NICER): design and development

During 2014 and 2015, NASA's Neutron star Interior Composition Explorer (NICER) mission proceeded successfully through Phase C, Design and Development. An X-ray (0.2-12 keV) astrophysics payload destined for the International Space Station, NICER is manifested for launch in early 2017 on the Commercial Resupply Services SpaceX-11 flight. Its scientific objectives are to investigate the internal structure, dynamics, and energetics of neutron stars, the densest objects in the universe. During Phase C, flight components including optics, detectors, the optical bench, pointing actuators, electronics, and others were subjected to environmental testing and integrated to form the flight payload. A custom-built facility was used to co-align and integrate the X-ray "concentrator" optics and silicon-drift detectors. Ground calibration provided robust performance measures of the optical (at NASA's Goddard Space Flight Center) and detector (at the Massachusetts Institute of Technology) subsystems, while comprehensive functional tests prior to payload-level environmental testing met all instrument performance requirements. We describe here the implementation of NICER's major subsystems, summarize their performance and calibration, and outline the component-level testing that was successfully applied