Complex Systems Science: Dreams of Universality, Reality of Interdisciplinarity

Using a large database (~ 215 000 records) of relevant articles, we empirically study the "complex systems" field and its claims to find universal principles applying to systems in general. The study of references shared by the papers allows us to obtain a global point of view on the structure of this highly interdisciplinary field. We show that its overall coherence does not arise from a universal theory but instead from computational techniques and fruitful adaptations of the idea of self-organization to specific systems. We also find that communication between different disciplines goes through specific "trading zones", ie sub-communities that create an interface around specific tools (a DNA microchip) or concepts (a network).Comment: Journal of the American Society for Information Science and Technology (2012) 10.1002/asi.2264

Potential aromatic compounds as markers to differentiate between Tuber melanosporum and Tuber indicum truffles

The Tuber indicum (Chinese truffle) and Tuber melanosporum (Black truffle) species are morphologically very similar but their aromas are very different. The black truffle aroma is much more intense and complex, and it is consequently appreciated more gastronomically. This work tries to determine whether the differences between the aromatic compounds of both species are sufficiently significant so as to apply them to fraud detection. An olfactometric evaluation (GC-O) of T. indicum was carried out for the first time. Eight important odorants were identified. In order of aromatic significance, these were: 1-octen-3-one and 1-octen-3-ol, followed by two ethyl esters (ethyl isobutyrate and ethyl 2-methylbutyrate), 3-methyl-1-butanol, isopropyl acetate, and finally the two sulfides dimethyldisulfide (DMDS) and dimethylsulfide (DMS). A comparison of this aromatic profile with that of T. melanosporum revealed the following differences: T. indicum stood out for the significant aromatic contribution of 1-octen-3-one and 1-octen-3-ol (with modified frequencies (MF%) of 82% and 69%, respectively), while in the case of T. melanosporum both had modified frequencies of less than 30%. Ethyl isobutyrate, ethyl 2-methylbutyrate and isopropyl acetate were also significantly higher, while DMS and DMDS had low MF (30-40%) compared to T. melanosporum (>70%). The volatile profiles of both species were also studied by means of headspace solid-phase microextraction (HS-SPME-GC-MS). This showed that the family of C8 compounds (3-octanone, octanal, 1-octen-3-one, 3-octanol and 1-octen-3-ol) is present in T. indicum at much higher levels. The presence of 1-octen-3-ol was higher by a factor of about 100, while 1-octen-3-one was detected in T. indicum only (there was no chromatographic signal in T. melanosporum). As well as showing the greatest chromatographic differences, these two compounds were also the most powerful from the aromatic viewpoint in the T. indicum olfactometry. Therefore, either of the two chromatographic methods (GC-O or HS-SPME-GC-MS), together or separately, could be used as a screening technique to distinguish between T. indicum and T. melanosporum and thus avoid possible fraud

Reply to Comment on:"Nonmonotonic d_{x^2-y^2} Superconducting Order Parameter in Nd_{2-x}Ce_xCuO_4"

We confirm that all the results of scanning SQUID, tunneling, ARPES, penetration depth and Raman experiments are consistent with a nonmonotonic d_{x^2-y^2} superconducting order parameter proposed in Phys. Rev. Lett., 88, 107002 (2002).Comment: Reply to Comment by F. Venturini, R. Hackl, and U. Michelucci cond-mat/020541

The Tuning System for the HIE-ISOLDE High-Beta Quarter Wave Resonator

A new linac using superconducting quarter-wave resonators (QWR) is under construction at CERN in the framework of the HIE-ISOLDE project. The QWRs are made of niobium sputtered on a bulk copper substrate. The working frequency at 4.5 K is 101.28 MHz and they will provide 6 MV/m accelerating gradient on the beam axis with a total maximum power dissipation of 10 W on cavity walls. A tuning system is required in order to both minimize the forward power variation in beam operation and to compensate the unavoidable uncertainties in the frequency shift during the cool-down process. The tuning system has to fulfil a complex combination of RF, structural and thermal requirements. The paper presents the functional specifications and details the tuning system RF and mechanical design and simulations. The results of the tests performed on a prototype system are discussed and the industrialization strategy is presented in view of final production.Comment: 5 pages, The 16th International Conference on RF Superconductivity (SRF2013), Paris, France, Sep 23-27, 201

Cold asphalt contaning 100% reclamed asphalt. A sustainable technology for cycle paths and maintenance intervations

Both the National Recovery and Resilience Plan (Next Generation EU Program) and the development strategies for Smart Cities focus on cycle and pedestrian paths. Their pavements must be safe, durable and sustainable and considering the need to preserve the resources that Planet Earth offers to humans, it is essential to opt for innovative construction technologies that allow recycling methods without necessarily involving the addition of first-use materials. In the field of road infrastructure, the recovery of material deriving from the demolition of old pavements (RA - Reclaimed Asphalt) is only possible thanks to the use of specific products. A state-of-the-art rejuvenator is currently being used for the construction of cycling paths with 100% cold-mixed RA. This product is currently being studied for the INFRAROB project: “Maintaining integrity, performance and safety of the road infrastructure through autonomous robotized solutions and modularization” (Horizon 2020) with particular reference to “potholes patching” materials. Some technical data of the experiences developed to date are shown below

Intramuscular depot medroxyprogesterone versus oral megestrol for the control of postmenopausal hot flashes in breast cancer patients: a randomized study

n/

Origin of ferroelectricity in the multiferroic barium fluorides BaMF4

We present a first principles study of the series of multiferroic barium fluorides with the composition BaMF4, where M is Mn, Fe, Co, or Ni. We discuss trends in the structural, electronic, and magnetic properties, and we show that the ferroelectricity in these systems results from the "freezing in" of a single unstable polar phonon mode. In contrast to the case of the standard perovskite ferroelectrics, this structural distortion is not accompanied by charge transfer between cations and anions. Thus, the ferroelectric instability in the multiferroic barium fluorides arises solely due to size effects and the special geometrical constraints of the underlying crystal structure.Comment: 8 pages, 6 figures, 3 table

SERPINB3 delays glomerulonephritis and attenuates the lupus-like disease in lupus murine models by inducing a more tolerogenic immune phenotype

Objective: To explore the effects of SERPINB3 administration in murine lupus models with a focus on lupus-like nephritis. Methods: 40 NZB/W F1 mice were subdivided into 4 groups and intraperitoneally injected with recombinant SERPINB3 (7.5 \u3bcg/0.1 mL or 15 \u3bcg/0.1 mL) or PBS (0.1 mL) before (group 1 and 2) or after (group 3 and 4) the development of proteinuria ( 65100 mg/dl). Two additional mice groups were provided by including 20 MRL/lpr mice which were prophylactically injected with SERPINB3 (10 mice, group 5) or PBS (10 mice, group 6). Time of occurrence and levels of anti-dsDNA and anti-C1q antibodies, proteinuria and serum creatinine, overall- and proteinuria-free survival were assessed in mice followed up to natural death. Histological analysis was performed in kidneys of both lupus models. The Th17:Treg cell ratio was assessed by flow-cytometry in splenocytes of treated and untreated MRL/lpr mice. Statistical analysis was performed using non parametric tests and Kaplan-Meier curves, when indicated. Results: Autoantibody levels and proteinuria were significantly decreased and time of occurrence significantly delayed in SERPINB3-treated mice vs. controls. In agreement with these findings, proteinuria-free and overall survival were significantly improved in SERPINB3-treated groups vs. controls. Histological analysis demonstrated a lower prevalence of severe tubular lesions in kidneys of group 5 vs. group 6. SERPINB3-treated mice showed an overall trend toward a reduced prevalence of severe lesions in both strains. Th17:Treg ratio was significantly decreased in splenocytes of MRL/lpr mice treated with SERPINB3, compared to untreated control mice. Conclusions: SERPINB3 significantly improves disease course and delays the onset of severe glomerulonephritis in lupus-prone mice, possibly inducing a more tolerogenic immune phenotype

Materials study to implement a 3D printer system to repair road pavement potholes

InfraRob is a research project funded by the European Commission's research programme Horizon 2020 that aims to maintain integrity, performance, and safety of the road infrastructure through autonomous robotized solutions and modularization. A specific task of the project is focused on the development of a system 3D printer able to extrude a specific mixture for filling in small cracks and potholes, to be integrated with an existing small autonomous carrier. The first step of the research deals with the definition of the optimal parameters of the system 3D printer/mixture, by studying in parallel the material design and the printer design. This paper presents the study performed on a mixture chosen among those commonly used for road potholes repair. The mixture is studied to achieve and balance the different conflicting performances: consistence, flowability homogeneity, and internal structure. In addition to the basic components, the use of special additives has also been explored to improve the plasticity and adhesivity of the mixture. The first phase of tests is conducted to define the main printing controls: i) Extrudability control: materials for 3D printing need to have an acceptable degree of extrudability, which is related to the capacity of a material to pass continuously through the printing head; ii) Flowability control, to ensure the mixture can be easy-pumpable in the delivery system and easy-usable on the crack or the pothole to be filed-in; iii) Setting time control: printing material requires a certain setting time to maintain a consistent flow rate for good extrudability, thus appropriate additives are needed to control the setting time. The second phase includes in situ tests to verify the compaction of the mixture under the traffic loads. The paper presents the results of the lab and in situ tests, and the features of the chosen mix, suitable to be managed by the 3D printer

Plasma-arc-flow technology for sustainable treatment of high-impact fluid waste. A graphene-based material for industrial-wastewater purification

The research presented aimed to address the treatment of fluid waste with significant environmental impact by utilizing plasma technology, specifically plasma arc flow (PAF). The goal was to develop a novel purification material based on graphene for industrial applications and to optimize the treatment process. Analysis and monitoring of a submerged arc plasma reactor were the main goals of this research. This entailed a careful examination of the incoming wastewater that needed to be treated with the goal of identifying its precise composition characteristics with the relative tolerances needed for the reactions that were to follow in the reactor. The focus of the analysis was on input-parameter optimization, production of characteristic curves, and analysis of the factors affecting hydrogen evolution in syngas. Additionally, the study investigated how to determine the best viscosity for a particular input matrix by carrying out an evaluation study. The effects of this parameter were thought to be reduced by preheating the incoming wastewater through heat recovery. The long-term objective of the research is to create filters that can purify the water used and produced in gasification processes as well as to characterize the fixed reside from the gasifier for potential conversion into graphene-based material. In addition, this work acknowledges that additional experiments are required to validate its purifying capacity on wastewater produced by various industrial processes. Moreover, the inclusion of plans to model the evolution of hydrogen in PAF using the CHEMCAD software® and defining guidelines for optimizing parameters for enhanced energy efficiency showcased the research’s ambition to expand and refine its scope. Finding the best plant solutions that can significantly reduce electricity consumption is the ultimate goal. In summary, the study demonstrated significant advancement in the analysis and optimization of fluid-waste treatment with high environmental impact through the use of plasma technology, specifically PAF. A thorough and forward-looking approach was demonstrated by the use of modeling software, experimental studies, and plans for future research. The potential creation of graphene-based filters and the use of the fixed residue as a useful material further highlight the innovativeness of this research