59 research outputs found
Coastal subsidence in Oregon, USA, during the Giant Cascadia earthquake of AD 1700
Quantitative estimates of land-level change during the giant AD 1700 Cascadia earthquake along the Oregon coast are inferred from relative sea-level changes reconstructed from fossil foraminiferal assemblages preserved within the stratigraphic record. A transfer function, based upon a regional training set of modern sediment samples from Oregon estuaries, is calibrated to fossil assemblages in sequences of samples across buried peat-mud and peat-sand contacts marking the AD 1700 earthquake. Reconstructions of sample elevations with sample-specific errors estimate the amount of coastal subsidence during the earthquake at six sites along 400 km of coast. The elevation estimates are supported by lithological, carbon isotope, and faunal tidal zonation data. Coseismic subsidence at Nehalem River, Nestucca River, Salmon River, Alsea Bay, Siuslaw River and South Slough varies between 0.18 m and 0.85 m with errors between 0.18 m and 0.32 m. These subsidence estimates are more precise, consistent, and generally lower than previous semi-quantitative estimates. Following earlier comparisons of semi-quantitative subsidence estimates with elastic dislocation models of megathrust rupture during great earthquakes, our lower estimates for central and northern Oregon are consistent with modeled rates of strain accumulation and amounts of slip on the subduction megathrust, and thus, with a magnitude of 9 for the AD 1700 earthquake
Chemical signatures of the Anthropocene in the Clyde Estuary, UK: sediment hosted Pb, 207/206 Pb, Total Petroleum Hydrocarbons (TPH), Polyaromatic Hydrocarbon (PAH) and Polychlorinated Bipheny (PCB) pollution records
The sediment concentrations of total petroleum hydrocarbons (TPHs), polyaromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs), Pb and 207/206Pb isotope ratios were measured in seven cores from the middle Clyde estuary (Scotland, UK) with an aim of tracking the late Anthropocene. Concentrations of TPHs ranged from 34 to 4386 mg kg−1, total PAHs from 19 to 16 163 μg kg−1 and total PCBs between less than 4.3 to 1217 μg kg−1. Inventories, distributions and isomeric ratios of the organic pollutants were used to reconstruct pollutant histories. Pre-Industrial Revolution and modern non-polluted sediments were characterized by low TPH and PAH values as well as high relative abundance of biogenic-sourced phenanthrene and naphthalene. The increasing industrialization of the Clyde gave rise to elevated PAH concentrations and PAH isomeric ratios characteristic of both grass/wood/coal and petroleum and combustion (specifically petroleum combustion). Overall, PAHs had the longest history of any of the organic contaminants. Increasing TPH concentrations and a concomitant decline in PAHs mirrored the lessening of coal use and increasing reliance on petroleum fuels from about the 1950s. Thereafter, declining hydrocarbon pollution was followed by the onset (1950s), peak (1965–1977) and decline (post-1980s) in total PCB concentrations. Lead concentrations ranged from 6 to 631 mg kg−1, while 207/206Pb isotope ratios spanned 0.838–0.876, indicative of various proportions of ‘background’, British ore/coal and Broken Hill type petrol/industrial lead. A chronology was established using published Pb isotope data for aerosol-derived Pb and applied to the cores
Organic geochemistry of Palaeozoic source rocks, central North Sea (CNS)
This report details a regional analysis of the source rock quality and potential of Palaeozoic rocks of the UK Central North Sea for the 21CXRM Palaeozoic project. The objective was to undertake a regional screening of all intervals to identify source rocks using new and legacy datasets of all Carboniferous and Devonian samples. In addition, a literature review (Appendix 1) summarises source and kerogen typing information from legacy reports. The background and stratigraphic nomenclature are given in Monaghan et al. (2016), details on individual well interpretations and stratigraphy are given in Kearsey et al. (2015). Geological context on the results of this work are included in basin modelling (Vincent, 2015) and were synthesised into a petroleum systems analysis in Monaghan et al. (2015).
New and legacy Carboniferous and Devonian source rock geochemical data were examined per well using industry standard criteria to give an overview of the source rock quality, type (oil or gas prone) and maturity. The aims of this study were to classify the source rock quality of 33 wells, to examine if intervals were ‘gas-prone’ or ‘oil-prone’, and to ascertain the hydrocarbon generation stage of each well based on Rock-Eval pyrolysis, vitrinite reflectance (VR, where available) and total organic carbon (TOC) data. The term ‘gas prone’ was used to describe source rocks that have or could generate gas; ‘oil prone’ for source intervals that have or could generate oil. This study was a rapid screening exercise to identify intervals or areas of interest, and as such the data and inferences must be used concomitantly with other geological data to fully assess the source rock potential within the studied wells. It should be noted that the wells studied penetrate different parts of the geological succession and in many cases only small sections of the Devonian and Carboniferous interval.
An initial sift through the wells with available geochemical data indicated that 33 wells had enough data to be usefully evaluated. Subsequently it was found that 8 of the 33 wells had incomplete, unreliable or otherwise poor source rock quality data sets and therefore were not analysed further; the reasons are detailed in this report.
The remaining 25 wells selected for analysis were: 43/28-2, 26/07-1, 26/08-1, 36/13-1, 36/23-1, 38/16-1, 38/18-1, 39/07-1, 41/08-1, 42/10a-1, 42/10b-2ST, 42/09-1, 41/10-1, 42/10b-2, 41/15-1, 43/21-2, 41/01-1, 41/20-1, 41/14-1, 43/02-1, 43/17-2, 43/20b-2, 43/28-1, 43/28-2, 44/13-1, 44/16-1. Samples analysed from the majority of these wells were interpreted to be gas prone in the Carboniferous succession (Figure 1).
1. 41/10-1, 41/14-1 and 41/20-1 contained source rocks that were both gas window mature (e.g. VR >1.3) and can be regarded as excellent gas source. Strata in 43/17-2, 44/16-1 and 43/28-1 were also gas mature in all or parts of the section of interest, but with variable source rock quality. The six wells all had low S2 peaks: this may be due to either prior hydrocarbon generation and depletion or the initial presence of low amounts of non-inert kerogen.
2. 41/15-1, 42/10b-2 and 43/21-2 were also identified as possessing good gas-prone source rocks with elevated S2 values and also a high maturity attained by the source rocks. 41/01-1 was identified as a good for gas generation in the deeper section.
3. 26/07-1, 26/08-1, 36/13-1, 38/16-1, 39/07-1, 41/08-1, 42/10a-1, 42/10b-2ST, 42/09-1, 43/02-1, 43/20b-2, 43/28-2 and 44/13-1, contain good to excellent quality source rocks, but have not matured sufficiently to generate significant amount of gas, so these can be regarded as poor gas sources based on their current maturity. If present, in deeper basins some of these intervals will have generated significant quantities of gas
Peat properties, dominant vegetation type and microbial community structure in a tropical peatland
Tropical peatlands are an important carbon store and source of greenhouse gases, but the microbial component, particularly community structure, remains poorly understood. While microbial communities vary between tropical peatland land uses, and with biogeochemical gradients, it is unclear if their structure varies at smaller spatial scales as has been established for a variety of peat properties. We assessed the abundances of PLFAs and GDGTs, two membrane spanning lipid biomarkers in bacteria and fungi, and bacteria and archaea, respectively, to characterise peat microbial communities under two dominant and contrasting plant species, Campnosperma panamensis (a broadleaved evergreen tree), and Raphia taedigera (a canopy palm), in a Panamanian tropical peatland. The plant communities supported similar microbial communities dominated by Gram negative bacteria (38.9–39.8%), with smaller but significant fungal and archaeal communities. The abundance of specific microbial groups, as well as the ratio of caldarchaeol:crenarchaeol, isoGDGT: brGDGTs and fungi:bacteria were linearly related to gravimetric moisture content, redox potential, pH and organic matter content indicating their role in regulating microbial community structure. These results suggest that tropical peatlands can exhibit significant variability in microbial community abundance even at small spatial scales, driven by both peat botanical origin and localised differences in specific peat properties
Organic geochemistry of Palaeozoic Source Rocks of the Irish Sea, UK
The East Irish Sea gas and oil fields (Triassic reservoir e.g. Morecambe, Lennox) are believed to be sourced from the underlying Carboniferous strata (e.g. Armstrong et al., 1997; Quirk et al. 1999 and references therein). This study undertook a systematic screening of Rock-Eval and vitrinite reflectance data extracted from released legacy well reports with the aim of providing a data based, regional overview of Carboniferous source rock intervals and their levels of maturity in the wider Irish Sea study area. The method and description of calculated parameters used are given in Vane et al. (2015). The Palaeozoic stratigraphy of the region is described in Wakefield et al. (2016b) and the regional petroleum systems analysis in Pharaoh et al. (2016).
Released geochemical data from the Palaeozoic of the Irish Sea is sparse and a variety of stratigraphical units have been sampled, mostly from units other than the likely main source rock interval (Bowland Shale Formation and equivalents). Nine wells were evaluated: 110/02b-10, 110/07-2, 110/07b-6, 110/09a-2, 111/25-1A, 113/27-1, 113/27-2 and 113/27-3. Well 110/12a-1 was not assessed due to the absence of key maturity information. In these wells, the Pennine Lower Coal Measures, Millstone Grit Group and Bowland Shale Formation are mainly gas-prone strata of poor-fair generative potential remaining and mature to the gas window at the sampled intervals in Quadrants 110 and 113 (Figure 1). Within the limited well sample set examined, high Total Organic Carbon (TOC) coal intervals have the best generative potential remaining. The Cumbrian Coastal Group, Appleby Group and Carboniferous Limestone Supergroup present in two wells in Quadrant 111 are at oil to gas window maturity levels, but have low TOC and low residual hydrocarbon generative potential
Equal abundance of odd and even n-alkanes from cycad leaves: can the carbon preference index (CPI) faithfully record terrestrial organic matter input at low latitudes?
Long chain n-alkanes from the leaves of thirteen extant cycad species within the
Cycadacaea, Stangeriaceae, Zamiaceae families were measured by gas chromatographymass
spectrometry (GC-MS). Cycad n-alkane patterns ranged from nC10-nC37, were
unimodal in distribution, maximised at nC27-nC33 and gave average chain length (ACL)
values of 23.9 to 31.0. Low carbon preference indices (CPI) in the range of 0.88 to 2.70
were observed which is atypical of lipids from the leaves of terrestrial plants. Analysis
of variance between the three families of true cycads showed that there were no
significant differences between CPI values. The unusually low CPI values (<1.5) in
nine of the thirteen cycad species analysed suggests that caution needs to be exercised in
the use of n-alkanes distibutions as a chemical marker of terrestrial plant input in
sediments from tropical and sub-tropical regions
Organic geochemistry of Palaeozoic Source Rocks, Orcadian Study Area, North Sea, UK
A systematic screening of TOC, Rock-Eval and vitrinite reflectance data extracted from released legacy well reports was undertaken with the aim of providing a data based, regional overview of source rock intervals and their levels of maturity.
Released, publicly available data is sparse; much of the data for the Devonian of the Orcadian Basin is contained with confidential commercial reports (see Greenhalgh (2016) for a literature review of available information with regards to source rocks and migrated Palaeozoic oils in this area).
The regional screening approach used and technical parameters are described in Vane et al. (2015). The detailed stratigraphy is presented in Whitbread and Kearsey (2016; see Figure 2) and this regional screening is incorporated into the basin modelling work of Vincent (2016) and petroleum systems synthesis of Monaghan et al. (2016)
UK Geoenergy Observatories, Glasgow environmental baseline soil chemistry dataset
This report describes the environmental baseline topsoil chemistry dataset collected in February-March 2018 (03-18) as part of the United Kingdom Geoenergy Observatories (UKGEOS) project. Ninety, samples were collected from the shallow coal-mine Glasgow Geothermal Energy Research Field Site (GGERFS). The report accompanies the GGERFS Soil Chemistry03-18 dataset. It provides valuable information on soil chemistry prior to installation of the GGERFS-facility boreholes, against which any future change during the development/ running of the facility can be assessed. This information is necessary to help understand and de-risk similar shallow geothermal schemes in the future, provide public reassurance, and inform sustainable energy policy
Shale-gas potential of the Mid-Carboniferous Bowland-Hodder Unit in the Cleveland Basin (Yorkshire), Central Britain
The shale-gas potential of mid-Carboniferous mudrocks in the Bowland-Hodder unit in the Cleveland Basin (Yorkshire, northern England) was investigated through the analysis of a cored section from the uppermost part of the unit in the Malton-4 well using a multidisciplinary approach. Black shales are interbedded with bioturbated and bedded sandstones, representing basinal-offshore to prodelta – delta-front lithofacies. The total organic carbon (TOC) content of the shales ranges from 0.37 to 2.45 wt %. Rock-Eval pyrolysis data indicate that the organic matter is mainly composed of Type III kerogen with an admixture of Type II kerogen. Tmax (436–454°C), 20S/(20S+20R) C29 sterane ratios, and vitrinite reflectance values indicate that organic matter is in the mid- to late- mature (oil) stage with respect to hydrocarbon generation. Sedimentological and geochemical redox proxies suggest that the black shales were deposited in periodically oxic-dysoxic and anoxic bottom waters with episodic oxic conditions, explaining the relatively low TOC values. The Rock-Eval parameters indicate that the analysed mudrocks have a limited shale-gas potential. However, burial and thermal history modelling, and VRr data from other wells in the region, indicate that where they are more deeply-buried, the Bowland-Hodder shales will be within the gas window with VRr > 1.1 % at depths in excess of 2000 m. Therefore although no direct evidence for a high shale-gas potential in the Cleveland Basin has been found, this cannot be precluded at greater depths especially if deeper horizons are more organic rich
- …