Radial variation in cell morphology of melia azedarach planted in northern vietnam

The radial variation in cell morphology of ten-year-old Melia azedarach trees planted in northern Vietnam was experimentally investigated. The earlywood fiber lumen diameter and latewood fiber lumen diameter were almost unchanged from pith to 6th ring before significantly decreasing and remaining constant from 7th ring outwards. In contrast, fiber cell wall thickness in both earlywood and latewood increased from pith to 7th ring before becoming stable towards the bark. The maturation age of earlywood vessel lumen diameter estimated by segmented regression analysis indicated that wood of the Melia azedarach could be classified into core wood and outer wood, and the boundary between core and outer wood may be located at 7th ring from pith. This should be taken into account in wood processing using M. azedarach grown in northern Vietnam

Dispersion and nonlinearity properties of small solid-core photonic fibers with As2Se3 substrate

Characteristics of As2Se3 photonic crystal fibers (PCFs) with a solid-core and small-core diameter are numerically investigated in the long-wavelength range (from 2 to 10 μm). A full modal analysis and optical properties of designed photonic crystal fibers with lattice constant Λ and filling factor d/Λ are presented in terms of chromatic dispersion, effective refractive index, nonlinear coefficients, and confinement loss. The simulation results show that a high nonlinear coefficient of 4410.303 W–1·km–1 and a low confinement loss of 10−20 dB·km–1 can simultaneously be achieved in the proposed PCFs at a 4.5 μm wavelength. Chromatic dispersions are flat. The values of dispersion increase with increasing filling factor d/Λ and decrease with the increase in lattice constant Λ. In particular, some chromatic dispersion curves also cut the zero-dispersion line at two points. The flat dispersion feature, high nonlinearity, and small confinement loss of the proposed photonic crystal fiber structure make it suitable for supercontinuum

Mechanical response of outer frames in tuning fork gyroscope model with connecting diamond-shaped frame

In tuning fork micro-gyroscopes, two outer frames are connected by using the linking elements. The driving vibrations of the two outer frames are required to be exactly opposite to generate the opposite sensing modes perpendicular to driving direction. These opposite driving vibrations are provided by a mechanical structure named the diamond-shaped frame. This paper presents mechanical responses of two outer frames in a proposed model of tuning fork gyroscope when an external force with different types is applied to them. The results show that the presence of a diamond-shaped frame guarantees the absolute anti-phase mode for the driving vibrations of outer frames

Adaptation options for agricultural cultivation systems in the South Central Coast under the context of climate change: Assessment Report.

This report highlights the results of consultation meetings and field visits organized by the Department of Crop Production and the CGIAR Research Program on Climate Change, Agriculture and Food Security in Southeast Asia in association with the three offices of the Department of Agriculture and Rural Development in the South Central Coast provinces of Binh Thuan, Ninh Thuan, and Khanh Hoa, in combination with consultation with the provinces in the conference: “Summing up crops production in the Winter-Spring season in 2018-2019, implementing the Summer-Autumn season, Main rice season in 2019 for the South Central Coast and the Central Highlands” held by the Ministry of Agriculture and Rural Development in Tam Ky City, Quang Nam Province on 12 April 2019. The meetings underlined the progress made by the provinces on climate change adaptation and mitigation, options for risk reductions in agricultural production, and conversion of crop structure as results of implementing the guidelines of the provinces and the Sector, especially, solutions for reservation and efficient and economic use of water under the context of climate change. This assessment report also reviews some issues related to the agricultural transformation of the region in adapting to risks caused by climate change. They are based on comparative advantages in terms of geographical location and market of key agricultural products. This report also points out shortcomings in using land and unreasonable points in managing and using important natural resources, especially water, and provides recommendations for the agricultural transformation and inter-regional connection with the Central Highlands and the Southeast. The team also introduces climate-related risks maps and adaptation plans (CS MAP) which is applied in the five provinces in the Mekong Delta Region, and hopes this solution’s expansion shall be supported by the Ministry of Agriculture and Rural Development and the provinces

Evaluate the Results at Minimum 2-Years of Treating Rotator Cuff Tear by Arthroscopic Surgery

BACKGROUND: Rotator cuff tear (RCT) is a common injury of the shoulder, especially middle-aged people. Nonoperative treatment, cortisone injections are only effective at an early stage. Open surgery causes postoperative atrophy of the deltoid muscle, so results are limited. Arthroscopic rotator cuff repair surgery has been performed in Vietnam for about ten years, with many advantages such as the ability to accurately assess the lesions and less invasive procedure. In order to have a clearer view, we performed a mid-term assessment of the effectiveness of this surgery. AIM: Evaluate results over 2 years of patients with rotator cuff tears treated with arthroscopic surgery and their quality of life. METHOD: A group of 30 patients were diagnosed with RCT and surgery by arthroscopy to treat at Hanoi Medical University Hospital and Saint Paul Hospital between Jun 2015 and April 2017. The results of the surgeries were assessed by the degree of pain, muscle power, motion of the shoulder joint according to UCLA shoulder score. Evaluate the quality of life through the Rotator Cuff-Quality of Life (RC-QoL) index. RESULTS: The average age was 60.7 years. Female / male ratio was 1.3. Thirty-six months ± 6.41 was the average follow-up time (min 27 – max 50 months). The shoulder function is recorded according to UCLA has an average score of 30.9, therein good and excellent result were 90 %. The mean RC-QoL index was 91.5%. CONCLUSION: Treatment of RCT by arthroscopic surgery that has been evaluated for a minimum of 2 years follow-up showed good results and high quality of patient’s life

Research Notes : Exotic soybean observational yield performance trial in Kien Gian province --Mekong Delta --Vietnam --dry season 1981-1982

In the light of mutual technical assistance, six soybean varieties, namely \u27Bon minori\u27 (2 lines), \u27Enrei\u27 (2 lines), \u27Akiyoshi\u27 and \u27Hyuuga\u27, were forwarded by registered mail from Japan to Vietnam in May, 1981. Due to its long postal course, soybean seed was only received in November 1981. A month later, seeds were planted on December 10, 1981, at the provincial seed farm of Kien Giang province and then harvested on February 26, 1982

A circulatory ionic wind for inertial sensing application

A novel gyroscope using circulatory electro-hydrodynamics flow in a confined space is presented for the first time. The configuration of the new gyroscope includes three point-ring corona discharge actuators that generate ion flows in three separated sub-channels. The three ion flows then merge together when going through a nozzle of the main chamber entrance and create a jet flow. In the new configuration, the residual charge of ion wind flow is removed by a master-ring electrode located at one end of the main chamber. Under the effect of the angular speed of gyroscope, the jet flow is deflected and this deflection is sensed using hotwires. The results, which are consistently acquired by both the numerical simulation and experiment on our prototypes, demonstrate the repeatability and stability of the new approach. Since the ion wind can be generated by a minimum power, the present configuration-based device does not require any vibrating component. Thus, the device is robust, cost, and energy-effective

Improvement of Tuning Fork Gyroscope Drive-mode Oscillation Matched using a Differential Driving Suspension Frame

This paper presents a novel design of a vibration tuning fork gyroscope (TFG) based on a differential driving suspension coupling spring between two gyroscopes. The proposed TFG is equivalent to a transistor differential amplifier circuit. The mechanical vibrations of driving frames are, therefore, well matched. The matching level depends on stiffness of spring. When three various TFG structures respond to differential stiffness of spring, their the driving frame mechanical vibration is well matched in case the input excitation driving differential phase is less than 3.5°, 2.5°, and 4°, respectively. The fabricated tuning fork gyroscope linearly operates in the range from -200 to +200 degree/s with the resolution of about 0.45 mV/degree/s

Comparison of dispersion characteristics of hollow-core photonic crystal fibers filled with aromatic compounds

In this paper, hollow-core photonic crystal fibers (PCFs) infiltrated with benzene and nitrobenzene are designed and investigated. Their dispersion characteristics are numerically simulated. The results show that using the aromatic-compounds-filled hollow core of PCFs makes dispersion curves flat. In addition, the dispersion curves approach the zero-dispersion line closer than previously published dispersion curves of PCFs with toluene, thus significantly improving the supercontinuum generation to create the ultra-flat spectrum expansion

Study on point-to-ring corona based gyroscope

We present for the first time a novel gyroscope using circulatory electro-hydrodynamics flow in a confined space. Three point-ring corona actuator is to generate ionic flows in three separated channels and the ionic flows then merge together at a nozzle of the main chamber to create a jet flow. The residual charge of ion winds is removed by a master-ring electrode. By the effect of angular rate, the jet flow handled by a hotwire anemometry is deflected and sensed. Results by both experiment and numerical simulation consistently show good repeatability and stability of the new configuration-based device. Since ion wind is generated by a minimum power, the device does not require any vibrating component, thus the device is robust, low cost and energy consumption