Early hydration study of standard and doped Alite-Belite-Ye’elimite (ABY) cements through Synchrotron Radiation

The manufacturing of ye'elimite-rich cements releases from 15 to 37%, depending on their composition, less CO2 to the atmosphere than ordinary Portland cement (OPC). BYF cements containing belite, ye’elimite and ferrite as main crystalline phases, are promising eco-friendly binders. Nevertheless, belite, its main phase, shows a slow hydrating behaviour and the mechanical strengths are lower than OPC at early ages. Some alternatives to solve this problem are: i) forming alite jointly with belite and ye’elimite during clinkering, Alite Belite Ye’elimite (ABY) clinkers. The hydration of alite and ye’elimite would develop high mechanical strengths at early ages, and belite contributes to later curing times; ii) a second alternative is the stabilisation of alpha forms of belite using dopants such as boron named here after dABY. In this work, two different types of ABY clinkers (standard and doped) have been prepared and characterized to understand their different hydration mechanisms at the same water-to-cement (w/c) ratio. The clinkers have been prepared using CaF2 and ZnO as mineralizers, and borax as dopant agent to stabilize alpha forms of belite (’H-C2S). Afterwards, 14 wt% of anhydrite (as soluble sulphate source) was added to prepare the corresponding cements. Finally, the hydration study was performed at w/c ratio of 0.5. Here, an in-situ hydration study using synchrotron X-ray powder diffraction (SXRPD) for the first 14 hours of hydration is reported. Moreover, these results will be combined with the ex-situ laboratory X-ray powder diffraction study (LXRPD) at 1 day of hydration and calorimetric results. Rietveld quantitative phase analysis has been used to establish the phase evolution across the time.Universidad de Málaga. Campus de Excelencia Internacional Andalucía Tech. MINECO ( BIA2017-82391-R), co-funded by FEDER, and I3 [IEDI-2016-0079]

Synchrotron X-ray microdiffraction to study dental structures in Cretaceous crocodylomorphs

Synchrotron radiation X-ray microdiffraction (SR-μXRD) has been applied for the first time as a fundamental method of analysis to unveil crocodilian teeth growth and development. Teeth from a fossil crocodylomorph from the Upper Cretaceous site of Lo Hueco (Spain) and a modern crocodylian from the living species Crocodylus niloticus have been analysed. Both samples have been studied through Polarized Light Microscopy, Scanning Electron Microscopy coupled with Energy Dispersive X-Ray Spectroscopy, Confocal Raman Spectroscopy, and SR-μXRD. Significant differences have been found in hydroxyapatite (HA) crystallite sizes and texture, and the evolution of these two features along teeth depth. The main differences observed in crystallite size are related to postdepositional processes and/or the environmental and functional pressures of teeth during crocodylomorph life, very different from that of the modern specimen. Regarding the crystalline texture in the tooth enamel, it can be linked to teeth functionality during crocodilian life, causing the directed growth of HA crystallites due to the mechanical stress to which they are subjectedThis work was funded by the projects PGC2018-099405-B-100 (Ministerio de Ciencia, Innovacion y Universidades); HAR2017- 82755-P, HAR2016-78036-P, HAR2016-74846-P, HAR2017-83004-P, CGL2015-66604, CGL2015-68363 and MAT2015-67593-P (Ministerio de Economía y Competitividad, Spain); and 201860E127 (CSIC

A captured room temperature stable Wheland intermediate as a key structure for the orthogonal decoration of 4-amino-pyrido[2,3-d]pyrimidin-7 (8H)-ones

Wheland intermediates are usually unstable compounds and only a few have been isolated at very low temperatures. During our work on tyrosine kinase inhibitors, we studied the bromination of 7 in order to obtain a dibromo substituted pyrido[2,3-d]pyrimidin-7(8H)-one which could be orthogonally decorated. Surprisingly, treatment of 7 with 3 equiv. of Br2 in acetic acid (AcOH) afforded 12, a captured room temperature stable Wheland bromination intermediate stabilized by the bromination of the imino tautomer of the amino group at C4 of the pyridopyrimidine skeleton. The structure was confirmed by crystal structure determination from powder X-ray diffraction data. Treatment of 12 with DMSO afforded the dibromo substituted compound 13 presenting a bromine atom at C6 and C5-C6 unsaturation. 13 was directly accessed by treating 7 with N-bromosuccinimide (NBS), a protocol extended to other compounds using NBS or N-iodosuccinimide (NIS) to afford 6-halo substituted systems. 26, bearing an iodine at C6 and a p-bromophenylamino at C2, allows the orthogonal decoration of pyridopyrimidines

Synchrotron X-ray microdiffraction to study dental structures in Cretaceous crocodylomorphs

Synchrotron radiation X-ray microdiffraction (SR-μXRD) has been applied for the first time as a fundamental method of analysis to unveil crocodilian teeth growth and development. Teeth from a fossil crocodylomorph from the Upper Cretaceous site of Lo Hueco (Spain) and a modern crocodylian from the living species Crocodylus niloticus have been analysed. Both samples have been studied through Polarized Light Microscopy, Scanning Electron Microscopy coupled with Energy Dispersive X-Ray Spectroscopy, Confocal Raman Spectroscopy, and SR-μXRD. Significant differences have been found in hydroxyapatite (HA) crystallite sizes and texture, and the evolution of these two features along teeth depth. The main differences observed in crystallite size are related to postdepositional processes and/or the environmental and functional pressures of teeth during crocodylomorph life, very different from that of the modern specimen. Regarding the crystalline texture in the tooth enamel, it can be linked to teeth functionality during crocodilian life, causing the directed growth of HA crystallites due to the mechanical stress to which they are subjected

Spin Structures of Textured and Isotropic Nd-Fe-B-Based Nanocomposites: Evidence for Correlated Crystallographic and Spin Textures

peer reviewedR-AGR-0134 - IRP12 - Interface 2012 (20120701-20150630) - MICHELS Andrea

1-Ethyl-2,3-dimethylimidazolium paramagnetic ionic liquids with 3D magnetic ordering in its solid state: synthesis, structure and magneto-structural correlations

Financial support from the Spanish Ministerio de Ciencia e Innovaci´on (Projects MAT2011-27573-C04) and Becas Iberoamericas J´ovenes Profesores Investigadores, 2015, Santander Universidades is acknowledged. The authors gratefully acknowledge the MALTA Consolider Ingenio 2010 (Ref. CSD2007-00045). IH acknowledges funding from the EU FP7 (Marie Curie-CIG 303535)

The DEMO magnet system – Status and future challenges

We present the pre-concept design of the European DEMO Magnet System, which has successfully passed the DEMO plant-level gate review in 2020. The main design input parameters originate from the so-called DEMO 2018 baseline, which was produced using the PROCESS systems code. It defines a major and minor radius of 9.1 m and 2.9 m, respectively, an on-axis magnetic field of 5.3 T resulting in a peak field on the toroidal field (TF) conductor of 12.0 T. Four variants, all based on low-temperature superconductors (LTS), have been designed for the 16 TF coils. Two of these concepts were selected to be further pursued during the Concept Design Phase (CDP): the first having many similarities to the ITER TF coil concept and the second being the most innovative one, based on react-and-wind (RW) Nb3Sn technology and winding the coils in layers. Two variants for the five Central Solenoid (CS) modules have been investigated: an LTS-only concept resembling to the ITER CS and a hybrid configuration, in which the innermost layers are made of high-temperature superconductors (HTS), which allows either to increase the magnetic flux or to reduce the outer radius of the CS coil. Issues related to fatigue lifetime which emerged in mechanical analyses will be addressed further in the CDP. Both variants proposed for the six poloidal field coils present a lower level of risk for future development. All magnet and conductor design studies included thermal-hydraulic and mechanical analyses, and were accompanied by experimental tests on both LTS and HTS prototype samples (i.e. DC and AC measurements, stability tests, quench evolution etc.). In addition, magnet structures and auxiliary systems, e.g. cryogenics and feeders, were designed at pre-concept level. Important lessons learnt during this first phase of the project were fed into the planning of the CDP. Key aspects to be addressed concern the demonstration and validation of critical technologies (e.g. industrial manufacturing of RW Nb3Sn and HTS long conductors, insulation of penetrations and joints), as well as the detailed design of the overall Magnet System and mechanical structures

CIBERER : Spanish national network for research on rare diseases: A highly productive collaborative initiative

Altres ajuts: Instituto de Salud Carlos III (ISCIII); Ministerio de Ciencia e Innovación.CIBER (Center for Biomedical Network Research; Centro de Investigación Biomédica En Red) is a public national consortium created in 2006 under the umbrella of the Spanish National Institute of Health Carlos III (ISCIII). This innovative research structure comprises 11 different specific areas dedicated to the main public health priorities in the National Health System. CIBERER, the thematic area of CIBER focused on rare diseases (RDs) currently consists of 75 research groups belonging to universities, research centers, and hospitals of the entire country. CIBERER's mission is to be a center prioritizing and favoring collaboration and cooperation between biomedical and clinical research groups, with special emphasis on the aspects of genetic, molecular, biochemical, and cellular research of RDs. This research is the basis for providing new tools for the diagnosis and therapy of low-prevalence diseases, in line with the International Rare Diseases Research Consortium (IRDiRC) objectives, thus favoring translational research between the scientific environment of the laboratory and the clinical setting of health centers. In this article, we intend to review CIBERER's 15-year journey and summarize the main results obtained in terms of internationalization, scientific production, contributions toward the discovery of new therapies and novel genes associated to diseases, cooperation with patients' associations and many other topics related to RD research

Application of delta recycling to electron automated diffraction tomography data from inorganic crystalline nanovolumes

delta Recycling is a simple procedure for directly extracting phase information from Patterson-type functions [Rius (2012). Acta Cryst. A68, 399-400]. This new phasing method has a clear theoretical basis and was developed with ideal single-crystal X-ray diffraction data. On the other hand, introduction of the automated diffraction tomography (ADT) technique has represented a significant advance in electron diffraction data collection [Kolb et al. (2007). Ultramicroscopy, 107, 507-513]. When combined with precession electron diffraction, it delivers quasi-kinematical intensity data even for complex inorganic compounds, so that single-crystal diffraction data of nanometric volumes are now available for structure determination by direct methods. To check the tolerance of delta recycling to missing data-collection corrections and to deviations from kinematical behaviour of ADT intensities, delta recycling has been applied to differently shaped nanocrystals of various inorganic materials. The results confirm that it can phase ADT data very efficiently. In some cases even more complete structure models than those derived from conventional direct methods and least-squares refinement have been found. During this study it has been demonstrated that the Wilson-plot scaling procedure is largely insensitive to sample thickness variations and missing absorption corrections affecting electron ADT intensities