Thermocapillary actuation of droplets on chemically patterned surfaces by programmable microheater arrays

We have designed a microfluidic device for the actuation of liquid droplets or continuous streams on a solid surface by means of integrated microheater arrays. The microheaters provide control of the surface temperature distribution with high spatial resolution. These temperature gradients locally alter the surface tension along droplets and thin films thus propelling the liquid toward the colder regions. In combination with liquophilic and liquophobic chemical surface patterning, this device can be used as a logistic platform for the parallel and automated routing, mixing and reacting of a multitude of liquid samples, including alkanes, poly(ethylene glycol) and water

Microfluidic actuation by modulation of surface stresses

We demonstrate the active manipulation of nanoliter liquid samples on the surface of a glass or silicon substrate by combining chemical surface patterning with electronically addressable microheater arrays. Hydrophilic lanes designate the possible routes for liquid migration while activation of specific heater elements determine the trajectories. The induced temperature fields spatially modulate the liquid surface tension thereby providing electronic control over the direction, timing, and flow rate of continuous streams or discrete drops. Temperature maps can be programed to move, split, trap, and mix ultrasmall volumes without mechanically moving parts and with low operating voltages of 2–3 V. This method of fluidic actuation allows direct accessibility to liquid samples for handling and diagnostic purposes and provides an attractive platform for palm-sized and battery-powered analysis and synthesis

Modelling Mixed Microbial Culture Polyhydroxyalkanoate Accumulation Bioprocess towards Novel Methods for Polymer Production Using Dilute Volatile Fatty Acid Rich Feedstocks

Volatile fatty acid (VFA) rich streams from fermentation of organic residuals and wastewater are suitable feedstocks for mixed microbial culture (MMC) Polyhydroxyalkanoate (PHA) production. However, many such streams have low total VFA concentration (1–10 gCOD/L). PHA accumulation requires a flow-through bioprocess if the VFAs are not concentrated. A flow through bioprocess must balance goals of productivity (highest possible influent flow rates) with goals of substrate utilization efficiency (lowest possible effluent VFA concentration). Towards these goals, dynamics of upshift and downshift respiration kinetics for laboratory and pilot scale MMCs were evaluated. Monod kinetics described a hysteresis between the upshift and downshift responses. Substrate concentrations necessary to stimulate a given substrate uptake rate were significantly higher than the concentrations necessary to sustain the attained substrate uptake rate. A benefit of this hysteresis was explored in Monte Carlo based PHA accumulation bioprocess numerical simulations. Simulations illustrated for a potential to establish continuous flow-through PHA production bioprocesses even at a low (1 gCOD/L) influent total VFA concentration. Process biomass recirculation into an engineered higher substrate concentration mixing zone, due to the constant influent substrate flow, enabled to drive the process to maximal possible PHA production rates without sacrificing substrate utilization efficiency

Soluble gC1qR is an autocrine signal that induces B1R expression on endothelial cells

Bradykinin (BK) is one of the most potent vasodilator agonists known and belongs to the kinin family of proinflammatory peptides. BK induces its activity via two G protein-coupled receptors: BK receptor 1 (B1R) and BK receptor 2. Although BK receptor 2 is constitutively expressed on endothelial cells (ECs), B1R is induced by IL-1β. The C1q receptor, receptor for the globular heads of C1q (gC1qR), which plays a role in BK generation, is expressed on activated ECs and is also secreted as soluble gC1qR (sgC1qR). Because sgC1qR can bind to ECs, we hypothesized that it may also serve as an autocrine/paracrine signal for the induction of B1R expression. In this study, we show that gC1qR binds to ECs via a highly conserved domain consisting of residues 174-180, as assessed by solid-phase binding assay and deconvolution fluorescence microscopy. Incubation of ECs (24 h, 37°C) with sgC1qR resulted in enhancement of B1R expression, whereas incubation with gC1qR lacking aa 174-180 and 154-162 had a diminished effect. Binding of sgC1qR to ECs was through surface-bound fibrinogen and was inhibited by anti-fibrinogen. In summary, our data suggest that, at sites of inflammation, sgC1qR can enhance vascular permeability by upregulation of B1R expression through de novo synthesis, as well as rapid translocation of preformed B1R

Characterization of Composites Manufactured Through Reshaping of EoL Thermoplastic Polymers Reinforced with Recycled Carbon Fibers

This article investigates if and at what extent a recycling process based on grinding, melting and re-shaping of recycled carbon fibers reinforced thermoplastic polymers (rCFRPs) can affect their physical, mechanical and thermal properties. The aim is to establish if they can be taken into consideration in the manufacturing of new composite materials in different sectors: automotive, marine, sporting goods, etc. Composites materials were submitted to the measurement of the fibers length they are composed of, and then analyzed by means of tensile and impact tests and a dynamic mechanical analysis (DMA). All the characterizations were performed to both initial and recycled composites and, in some cases, they were replied also after the intermediate accelerated aging. Characterization performed confirmed that, as expected, the recycling process affects the properties of the composites, but in different manners and to a different extent when different polymers are involved. Tensile and impact tests pointed out that the polypropylene based composites showed a less stiff and a more brittle behaviour after the recycling process and the DMA confirmed this evidence, highlighting in addition a more viscous behavior of the polymer after the recycling. Conversely, the polyamide 6 based composites increased their stiffness and ductility after the recycling. For all the composites the tensile strength dropped, confirming the weakening of the materials

Passive galaxies as tracers of cluster environments at z~2

Even 10 billion years ago, the cores of the first galaxy clusters are often found to host a characteristic population of massive galaxies with already suppressed star formation. Here we search for distant cluster candidates at z~2 using massive passive galaxies as tracers. With a sample of ~40 spectroscopically confirmed passive galaxies at 1.3<z<2.1, we tune photometric redshifts of several thousands passive sources in the full 2 sq.deg. COSMOS field. This allows us to map their density in redshift slices, probing the large scale structure in the COSMOS field as traced by passive sources. We report here on the three strongest passive galaxy overdensities that we identify in the redshift range 1.5<z<2.5. While the actual nature of these concentrations is still to be confirmed, we discuss their identification procedure, and the arguments supporting them as candidate galaxy clusters (likely mid-10^13 M_sun range). Although this search approach is likely biased towards more evolved structures, it has the potential to select still rare, cluster-like environments close to their epoch of first appearance, enabling new investigations of the evolution of galaxies in the context of structure growth.Comment: 5 pages, 5 figures; A&A Letters, in pres

Status of the Cylindical-GEM project for the KLOE-2 Inner Tracker

The status of the R&D on the Cylindrical-GEM (CGEM) detector foreseen as Inner Tracker for KLOE-2, the upgrade of the KLOE experiment at the DAFNE phi-factory, will be presented. The R&D includes several activities: i) the construction and complete characterization of the full-size CGEM prototype, equipped with 650 microns pitch 1-D longitudinal strips; ii) the study of the 2-D readout with XV patterned strips and operation in magnetic field (up to 1.5T), performed with small planar prototypes in a dedicated test at the H4-SPS beam facility; iii) the characterization of the single-mask GEM technology for the realization of large-area GEM foils.Comment: 4 pages, 10 figures, Presented at Vienna Conference on Instrumentation (Feb 15-20, 2010, Vienna, Austria). Submitted to the Proceeding