5,585 research outputs found
Simple and effective method to lock buoy position to ocean currents
Window-shade drogue, used with drifting buoys to keep them moving with current at speed as close to that of current as possible, has drag coefficient of 1.93 compared to maximum of 1.52 for previous drogues. It is remarkably simple to construct, use, and store
Thermal conductivity of comets
A value is described for the thermal conductivity of the frost layer and for the water-ice solid debris mixture. The value of the porous structure is discussed as a function of depth only. Graphs show thermal conductivity as a function of depth and temperature at constant porosity and density
Thermal conductivity of heterogeneous mixtures and lunar soils
The theoretical evaluation of the effective thermal conductivity of granular materials is discussed with emphasis upon the heat transport properties of lunar soil. The following types of models are compared: probabilistic, parallel isotherm, stochastic, lunar, and a model based on nonlinear heat flow system synthesis
Probe Without Moving Parts Measures Flow Angle
The measurement of local flow angle is critical in many fluid-dynamic applications, including the aerodynamic flight testing of new aircraft and flight systems. Flight researchers at NASA Dryden Flight Research Center have recently developed, flight-tested, and patented the force-based flow-angle probe (FLAP), a novel, force-based instrument for the measurement of local flow direction. Containing no moving parts, the FLAP may provide greater simplicity, improved accuracy, and increased measurement access, relative to conventional moving vane-type flow-angle probes. Forces in the FLAP can be measured by various techniques, including those that involve conventional strain gauges (based on electrical resistance) and those that involve more advanced strain gauges (based on optical fibers). A correlation is used to convert force-measurement data to the local flow angle. The use of fiber optics will enable the construction of a miniature FLAP, leading to the possibility of flow measurement in very small or confined regions. This may also enable the tufting of a surface with miniature FLAPs, capable of quantitative flow-angle measurements, similar to attaching yarn tufts for qualitative measurements. The prototype FLAP was a small, aerodynamically shaped, low-aspect-ratio fin about 2 in. (approximately equal to 5 cm) long, 1 in. (approximately equal to 2.5 cm) wide, and 0.125 in. (approximately equal to 0.3 cm) thick (see Figure 1). The prototype FLAP included simple electrical-resistance strain gauges for measuring forces. Four strain gauges were mounted on the FLAP; two on the upper surface and two on the lower surface. The gauges were connected to form a full Wheatstone bridge, configured as a bending bridge. In preparation for a flight test, the prototype FLAP was mounted on the airdata boom of a flight-test fixture (FTF) on the NASA Dryden F-15B flight research airplane
Phase Diagram of CeCoIn_5 in the Vicinity of H_{c2} as Determined by NMR
We report ^{115}In nuclear magnetic resonance (NMR) measurements in the
heavy-fermion superconductor CeCoIn_5 as a function of temperature in different
magnetic fields applied parallel to the plane. The
measurements probe a part of the phase diagram in the vicinity of the
superconducting critical field H_{c2} where a possible inhomogeneous
superconducting state, Fulde-Ferrel-Larkin-Ovchinnikov (FFLO), is stabilized.
We have identified clear NMR signatures of two phase transitions occurring in
this part of the phase diagram. The first order phase transitions are
characterized by the sizable discontinuity of the shift. We find that a
continuous second order phase transition from the superconducting to the FFLO
state occurs at temperature below which the shift becomes temperature
independent. We have compiled the first phase diagram of CeCoIn_5 in the
vicinity of H_{c2} from NMR data and found that it is in agreement with the one
determined by thermodynamic measurements.Comment: 4 pages, submitted to Proceedings of SCES'0
A Review of the Relationship of the ENC and DNC Hydrographic Vector Data Products
This document discusses the level of harmonization between the S-57 and DIGEST standards and the relationship between the ENC and DNC products. It is shown that the military and regulated commercial navigation have different needs, and that it is natural to have two different standards. However, in those areas where the needs overlap the standards should be equivalent. Commercial navigation requires "official" data whereas the military require a broad range of the "best available data". These needs are complementary. At the content level ENC data can be a pure subset of DNC data, however additional harmonization is required to achieve this
Vortex lattice stability in the SO(5) model
We study the energetics of superconducting vortices in the SO(5) model for
high- materials proposed by Zhang. We show that for a wide range of
parameters normally corresponding to type II superconductivity, the free energy
per unit flux \FF(m) of a vortex with flux quanta is a decreasing
function of , provided the doping is close to its critical value. This
implies that the Abrikosov lattice is unstable, a behaviour typical of type I
superconductors. For dopings far from the critical value, \FF(m) can become
very flat, indicating a less rigid vortex lattice, which would melt at a lower
temperature than expected for a BCS superconductor.Comment: 4 pp, revtex, 5 figure
- …