An active charge –exchange q measurements in ITER based upon the diagnostic hydrogen beam

The active charge exchange technique based upon Secondary Charge Exchange effect (SCX) is proposed for safety factor measurements in ITER. The performed numerical modeling shows that measurements of the magnetic pitch angle are possible up to the plasma center with radial resolution of 5 cm and integration time of about 10 ms. A systematic inaccuracy amounts several milliradians. An important advantage of SCX technique is the possibility of direct pitch angle measurements.Активная корпускулярная методика, основанная на эффекте вторичной перезарядки (SCX), предлагается для измерения коэффициента запаса устойчивости в ITER. Проведенное численное моделирование показывает, что измерения магнитного питч-угла возможны вплоть до центра плазмы с радиальным разрешением 5 см и временем накопления информации около 10 мс. Систематическая ошибка составляет несколько миллирадиан. Важным достоинством методики является возможность проведения прямых измерений питч-угла.Активна корпускулярна методика, заснована на ефекті вторинного перезарядження (SCX), пропонується для виміру коефіцієнта запасу стійкості в ІTER. Проведене чисельне моделювання показує, що виміри магнітного пітч-кута можливі аж до центра плазми з радіальним розділом 5 см і часом накопичування інформації близько 10 мс. Систематична помилка становить кілька мілірадіан. Важливим достоїнством методики є можливість проведення прямих вимірів пітч-кута

Nanostructured metal-fullerene field emission cathode

One of the important properties of carbon nanostructures is their cold electron emission ability. Carbon nanotubes and other nanostructures are capable of emitting high currents at relatively low electrical fields. They are already used in functional devices such as field emitters. The conventional method of carbon nanostructured cathodes manufacturing is thin film nanocarbon deposition using CVD process on electrically conducting substrate like metal or doped silicon plates. The alternative way of manufacturing of carbon field emission cathodes is based on a special processing of carbon microfibers or composite materials in metal holders. We used the similar approach to produce composite metal-nanocarbon material which may be easily processed and shaped to produce an effective field emission cathode which can be easily fixed an any environment. When you are citing the document, use the following link http://essuir.sumdu.edu.ua/handle/123456789/2058

Synchronization of coupled limit cycles

A unified approach for analyzing synchronization in coupled systems of autonomous differential equations is presented in this work. Through a careful analysis of the variational equation of the coupled system we establish a sufficient condition for synchronization in terms of the geometric properties of the local limit cycles and the coupling operator. This result applies to a large class of differential equation models in physics and biology. The stability analysis is complemented with a discussion of numerical simulations of a compartmental model of a neuron.Comment: Journal of Nonlinear Science, accepte

Relativistic Laser-Matter Interaction and Relativistic Laboratory Astrophysics

The paper is devoted to the prospects of using the laser radiation interaction with plasmas in the laboratory relativistic astrophysics context. We discuss the dimensionless parameters characterizing the processes in the laser and astrophysical plasmas and emphasize a similarity between the laser and astrophysical plasmas in the ultrarelativistic energy limit. In particular, we address basic mechanisms of the charged particle acceleration, the collisionless shock wave and magnetic reconnection and vortex dynamics properties relevant to the problem of ultrarelativistic particle acceleration.Comment: 58 pages, 19 figure

Pure Gauge Configurations and Tachyon Solutions to String Field Theories Equations of Motion

In constructions of analytical solutions to open string field theories pure gauge configurations parameterized by wedge states play an essential role. These pure gauge configurations are constructed as perturbation expansions and to guaranty that these configurations are asymptotical solutions to equations of motions one needs to study convergence of the perturbation expansions. We demonstrate that for the large parameter of the perturbation expansion these pure gauge truncated configurations give divergent contributions to the equation of motion on the subspace of the wedge states. We perform this demonstration numerically for the pure gauge configurations related to tachyon solutions for the bosonic and the NS fermionic SFT. By the numerical calculations we also show that the perturbation expansions are cured by adding extra terms. These terms are nothing but the terms necessary to make valued the Sen conjectures.Comment: 30 pages, 9 figures, references added and conclusion extende

Experimental investigation and validation of neutral beam current drive for ITER through ITPA Joint Experiments

Joint experiments investigating the off-axis neutral beam current drive (NBCD) capability to be utilized for advanced operation scenario development in ITER were conducted in four tokamaks (ASDEX Upgrade (AUG), DIII-D, JT-60U and MAST) through the international tokamak physics activity (ITPA). The following results were obtained in the joint experiments, where the toroidal field, B t, covered 0.4-3.7 T, the plasma current, Ip, 0.5-1.2 MA, and the beam energy, Eb, 65-350 keV. A current profile broadened by off-axis NBCD was observed in MAST. In DIII-D and JT-60U, the NB driven current profile has been evaluated using motional Stark effect diagnostics and good agreement between the measured and calculated NB driven current profile was observed. In AUG (at low δ ∼ 0.2) and DIII-D, introduction of a fast-ion diffusion coefficient of Db ∼ 0.3-0.5 m2 s-1 in the calculation gave better agreement at high heating power (5 MW and 7.2 MW, respectively), suggesting anomalous transport of fast ions by turbulence. It was found through these ITPA joint experiments that NBCD related physics quantities reasonably agree with calculations (with Db = 0-0.5 m2 s-1) in all devices when there is no magnetohydrodynamic (MHD) activity except ELMs. Proximity of measured off-axis beam driven current to the corresponding calculation with Db = 0 has been discussed for ITER in terms of a theoretically predicted scaling of fast-ion diffusion that depends on Eb/Te for electrostatic turbulence or βt for electromagnetic turbulence. © 2011 IAEA, Vienna

Candidate tidal disruption event AT2019fdr coincident with a high-energy neutrino

High Energy Astrophysic

First experimental results obtained using the highpower free electron laser at the siberian center for photochemical research

The first lasing near the wavelength of 140 µm was achieved in April 2003 using a high-power free electron laser (FEL) constructed at the Siberian Center for Photochemical Research. In this paper we briefly describe the design of the FEL driven by an accelerator–recuperator. Characteristics of the electron beam and terahertz laser radiation, obtained in the first experiments, are also presented in the paper.У Сибірському центрі фотохімічних досліджень навесні 2003 року отримана генерація випромінювання з довжиною хвилі 140 мкм на потужному лазері на вільних електронах (ЛВЕ). У роботі коротко описана конструкція ЛВЕ на базі прискорювача рекуператора і представлені результати вимірювання деяких параметрів електронного пучка і терагерцового випромінювання.В Сибирском центре фотохимических исследований весной 2003 года получена генерация излучения с длиной волны 140 мкм на мощном лазере на свободных электронах (ЛСЭ). В работе кратко описана конструкция ЛСЭ на базе ускорителя рекуператора и представлены результаты измерения некоторых параметров электронного пучка и терагерцового излучения

Organization of pay for the production of a considerable number of heterogeneous operations

The article presents approaches to the organization of labor in productions with a large number of dissimilar operations (eg, tool production). The major difficulty in assessing the results of such workers is the lack of standard, so measured and rated operations. There is shown the analysis of basic motivational factors of hourly and piece-rate pay systems for such productions. In the article there is developed the procedure for organizing the evaluation and pay system of workers according to individual productivity