Challenges and opportunities for energy recovery from municipal solid waste in the Russian Federation

Energy recovery from municipal solid waste (MSW) is currently a key factor in waste management in Russia, as can be seen from the corresponding changes in the state regulatory framework. The paper presents a comparative assessment of different waste flow characteristics; it focuses on pre-treatment options and the method of subsequent thermal treatment. It reflects the basic method of untreated MSW incineration and other advanced technologies which have different levels of waste preparation. Step-by-step research has been carried out in a large Russian city in order to determine different technological approaches to recovering energy from MSW. The study included: 1) field studies of the composition and characterization of MSW; 2) laboratory studies of MSW thermal properties, i.e. moisture, ash content and calorific value; 3) several options for waste treatment schemes with equipment of different technical specifications; 4) analysis of material flow, energy flow and key substance flow according to these considered schemes. The research revealed that for all seasons a significant proportion of MSW (almost 40%) is represented by fines (below 50 mm). On average, the energy potential of MSW (the total content of waste paper, polymers, textiles, wood, multilayer packaging, leather, rubber, footwear) amounts to about 40%. It was found that MSW calorific value depends on fraction size, since screening (over 50 mm) is characterized by high moisture and low content of valuable components, compared to MSW greater than 50 mm in size. Pre-processing and treatment of MSW allows solid recovered fuel (SRF) to be obtained with a calorific value similar to brown coal. The energy balance of the process allows the conclusion that 33.8% of initial MSW energy potential is concentrated in residues from the sorting process, since it has a relatively low calorific value of 4.8 MJ/kg, but a high mass fraction of 47.9%. In the process of MSW treatment and solid fuel production, most of the chlorine and mercury (80% and 55% respectively) is removed by the rest of the sorting process. The data obtained in the study can be used in selecting the optimal option for energy recovery from MSW. © 2019 WIT PressACKNOWLEDGEMENT The work was supported by Act 211 Government of the Russian Federation, contract № 02.A 03.21.0006

Results of the Baikal experiment on observations of macroscopic nonlocal correlations in reverse time

Although the general theory macroscopic quantum entanglement of is still in its infancy, consideration of the matter in the framework of action-at-a distance electrodynamics predicts for the random dissipative processes observability of the advanced nonlocal correlations. These correlations were really revealed in our previous experiments with some large-scale heliogeophysical processes as the source ones and the lab detectors as the probe ones. Recently a new experiment has been performing on the base of Baikal Deep Water Neutrino Observatory. The thick water layer is an excellent shield against any local impacts on the detectors. The first annual series 2012/2013 has demonstrated that detector signals respond to the heliogeophysical processes and causal connection of the signals directed downwards: from the Earth surface to the Baikal floor. But this nonlocal connection proved to be in reverse time. In addition advanced nonlocal correlation of the detector signal with the regional source-process: the random component of hydrological activity in the upper layer was revealed and the possibility of its forecast on nonlocal correlations was demonstrated. But the strongest macroscopic nonlocal correlations are observed at extremely low frequencies, that is at periods of several months. Therefore the above results should be verified in a longer experiment. We verify them by data of the second annual series 2013/2014 of the Baikal experiment. All the results have been confirmed, although some quantitative parameters of correlations and time reversal causal links turned out different due to nonstationarity of the source-processes. A new result is displaying of the advanced response of nonlocal correlation detector to the earthquake. This opens up the prospect of the earthquake forecast on the new physical principle, although further confirmation in the next events is certainly needed.Comment: 9 pages, 9 figure

Impact of hydrocarbon drilling mud on mud motor elastomers at different temperatures

The paper describes the experimental research of hydrocarbon drilling mud impact on engineering parameters of mud motor elastomer samples. It is believed to be urgent due to an increase in using mud motors in oil and gas well construction now, and the issue of intense exploitation is currently topical. The test results of elastomer IRP- 1226 dependent on the temperature are shown in the paper. It is proved that the hydrocarbon drilling muds have a significant impact on wearing of mud motors elastomers under the condition of a temperature increase

Methods of labor economy increasing in educational organization

The urgency of problem under investigation due to fact that increasing demand of the information technology infrastructure development in current conditions of educational institutions functioning, including formation of the information-educational environment point of view. Offered organizational and economic model of constructing processes for software development is based on agile project management, regarded as an object-oriented tool for optimizing labor economics. The purpose of article is in model for labor economy processes optimization as a part of software development based on agile project management methodology in departments associated with development of information technologies in educational organization. The leading method to the problem study is in measurement of labor economics key indicators, including specific metrics of technical expert’s human capital growth. As an experimental base of research are considered educational organizations, at different times, using classical approach for software development and agile project management. The article presents research results of educational organizations departments engaged in project activities for development of information technologies, which are in the development of software products using classical approach for software development and agile project management. Article submissions may be useful to create a culture for constructing labor economics and human capital system based on sustainable growth in departments of educational institutions working in the field of information technology. © 2016 Dorozhkin et al

Black Sea coastal forecasting system

The Black Sea coastal nowcasting and forecasting system was built within the framework of EU FP6 ECOOP (European COastalshelf sea OPerational observing and forecasting system) project for five regions: the south-western basin along the coasts of Bulgaria and Turkey, the north-western shelf along the Romanian and Ukrainian coasts, coastal zone around of the Crimea peninsula, the north-eastern Russian coastal zone and the coastal zone of Georgia. The system operates in the real-time mode during the ECOOP project and afterwards. The forecasts include temperature, salinity and current velocity fields. Ecosystem model operates in the off-line mode near the Crimea coast

Microstructure and mechanical properties of V-4Ti-4Cr alloy as a function of the chemical heat treatment regimes

The regularities of the formation of a heterophase structure and mechanical properties of V–4Ti–4Cr alloy as a function of thermomechanical and chemical heat treatments are studied. The regimes of thermomechanical treatment which provide the formation of a heterophase structure with a homogeneous volume distribution of oxycarbonitride nanoparticles with a size of about 10 nm and an increase in the volume content and thermal stability of this phase and which provide an increase in the temperature of alloy recrystallization are developed. The formation of the heterophase structure results in a substantial (up to 70%) increase in the short-term high-temperature strength of the alloy at T = 800°C. The increase in the strength is achieved while keeping a rather high level of plasticity

Effect of a boron implantation on the electrical properties of epitaxial HgCdTe with different material composition

In this work the experimental results of investigations of the dynamics of accumulation and spatial distribution of electrically active radiation defects when irradiating epitaxial films of Hg1-xCdxTe (MCT) with different material composition (x). The films, grown by molecular beam epitaxy (MBE) were irradiated by B ions at room temperature in the radiation dose range 1012 -1015 ions/cm2 and with ion energy 100 keV. The results give the differences in implantation profiles, damage accumulation and electrical properties as a function of the material composition of the film

Accumulation and annealing of radiation donor defects in arsenic-implanted Hg0.7Cd0.3Te films

Processes of accumulation and annealing of radiation-induced donor defects in arsenic-implanted Hg0.7Cd0.3Te films were studied with the use of the Hall-effect measurements with processing the data with mobility spectrum analysis. A substantial difference in the effects of arsenic implantation and post-implantation activation annealing on the properties of implanted layers and photodiode ‘base’ layers in Hg0.7Cd0.3Te and Hg0.8Cd0.2Te films was established and tentatively explained