Measurement of low turbulence levels with a thermoanemometer

The trend for decreasing the drag of aircraft is retention of laminar flow in the boundary layer over a large portion of the surface. The laminar boundary layer was studied in a low turbulence wind tunnel for low subsonic velocities. The method used and results of measurements of very low levels of turbulence are presented. Measurements were performed by a constant-resistance thermoanemometer

A Plane Coordinate System for Bernalillo County

The first purpose of this thesis is to frame an enabling act that could be submitted to legislature for adoption. Such an act would authorize the use of plane coordinate system, but not make it mandatory. Twenty-four states have passed laws establishing state coordinate systems. A second purpose of this thesis is to provide practicing engineers with all the necessary information and explanatory material in one manuscript to permit them to apply the system to their work. An example is worked out in detail using local points known to local men and fully explained step by step. In addition to the above, a method has been developed for extending triangulation control stations over moderate distances by plane coordinates without the use of involved geodetic computations

Surfaces containing a family of plane curves not forming a fibration

We complete the classification of smooth surfaces swept out by a 1-dimensional family of plane curves that do not form a fibration. As a consequence, we characterize manifolds swept out by a 1-dimensional family of hypersurfaces that do not form a fibration.Comment: Author's post-print, final version published online in Collect. Mat

Numerical Simulations of Dynamos Generated in Spherical Couette Flows

We numerically investigate the efficiency of a spherical Couette flow at generating a self-sustained magnetic field. No dynamo action occurs for axisymmetric flow while we always found a dynamo when non-axisymmetric hydrodynamical instabilities are excited. Without rotation of the outer sphere, typical critical magnetic Reynolds numbers $Rm_c$ are of the order of a few thousands. They increase as the mechanical forcing imposed by the inner core on the flow increases (Reynolds number $Re$). Namely, no dynamo is found if the magnetic Prandtl number $Pm=Rm/Re$ is less than a critical value $Pm_c\sim 1$. Oscillating quadrupolar dynamos are present in the vicinity of the dynamo onset. Saturated magnetic fields obtained in supercritical regimes (either $Re>2 Re_c$ or $Pm>2Pm_c$) correspond to the equipartition between magnetic and kinetic energies. A global rotation of the system (Ekman numbers $E=10^{-3}, 10^{-4}$) yields to a slight decrease (factor 2) of the critical magnetic Prandtl number, but we find a peculiar regime where dynamo action may be obtained for relatively low magnetic Reynolds numbers ($Rm_c\sim 300$). In this dynamical regime (Rossby number $Ro\sim -1$, spheres in opposite direction) at a moderate Ekman number ($E=10^{-3}$), a enhanced shear layer around the inner core might explain the decrease of the dynamo threshold. For lower $E$ ($E=10^{-4}$) this internal shear layer becomes unstable, leading to small scales fluctuations, and the favorable dynamo regime is lost. We also model the effect of ferromagnetic boundary conditions. Their presence have only a small impact on the dynamo onset but clearly enhance the saturated magnetic field in the ferromagnetic parts. Implications for experimental studies are discussed

Cool Stars and Space Weather

Stellar flares, winds and coronal mass ejections form the space weather. They are signatures of the magnetic activity of cool stars and, since activity varies with age, mass and rotation, the space weather that extra-solar planets experience can be very different from the one encountered by the solar system planets. How do stellar activity and magnetism influence the space weather of exoplanets orbiting main-sequence stars? How do the environments surrounding exoplanets differ from those around the planets in our own solar system? How can the detailed knowledge acquired by the solar system community be applied in exoplanetary systems? How does space weather affect habitability? These were questions that were addressed in the splinter session "Cool stars and Space Weather", that took place on 9 Jun 2014, during the Cool Stars 18 meeting. In this paper, we present a summary of the contributions made to this session.Comment: Proceedings of the 18th Cambridge Workshop on Cool Stars, Stellar Systems, and the Sun, Eds G. van Belle & H. Harris, 13 pages, 1 figur

Refined conformal spectra in the dimer model

Working with Lieb's transfer matrix for the dimer model, we point out that the full set of dimer configurations may be partitioned into disjoint subsets (sectors) closed under the action of the transfer matrix. These sectors are labelled by an integer or half-integer quantum number we call the variation index. In the continuum scaling limit, each sector gives rise to a representation of the Virasoro algebra. We determine the corresponding conformal partition functions and their finitizations, and observe an intriguing link to the Ramond and Neveu-Schwarz sectors of the critical dense polymer model as described by a conformal field theory with central charge c=-2.Comment: 44 page

A method to decrease the harmonic distortion in Mn-Zn ferrite/PZT and Ni-Zn ferrite/PZT layered composite rings exhibiting high magnetoelectric effects

International audienceWe have investigated the magnetoelectric (ME) effect in layered composite rings subjected to circumferential AC magnetic fields and DC magnetic fields in radial, axial or circumferential directions. Bilayer samples were obtained combining different grades of commercial Mn-Zn ferrites or Ni-Zn ferrites with commercial lead zirconate titanate (PZT). Mn-Zn ferrites with low magnetostriction saturation () and low magneto-crystalline anisotropy constants show high ME capabilities when associated with PZT in ring structures. In certain conditions, these ME effects are higher than those obtained with Terfenol-D/PZT composites in the same layered ring structure. Magnetostrictive and mechanical characterizations have given results that explain these high ME performances. Nevertheless, Mn-Zn ferrite/PZT composites exhibit voltages responses with low linearity especially at high signal level. Based on the particular structure of the ME device, a method to decrease the nonlinear harmonic distortion of the ME voltages is proposed. Harmonic distortion analysis of ME voltages measured in different configurations allows us to explain the phenomenon

BORAZANs: Tunable Fluorophores Based on 2-(Pyrazolyl)aniline Chelates of Diphenylboron

The reaction between 2-pyrazolyl-4-X-anilines, H(pzAnX), (X = para-OMe (L1), Me (L2), H (L3), Cl (L4), CO2Et (L5), CF3 (L6), CN (L7)) and triphenylboron in boiling toluene affords the respective, highly emissive N,N‘-boron chelate complexes, BPh2(pzAnX) (X = para-OMe (1), Me (2), H (3), Cl (4), CO2Et (5), CF3 (6), CN (7)) in high yield. The structural, electrochemical, and photophysical properties of the new boron complexes can be fine-tuned by varying the electron-withdrawing or -donating power of the para-aniline substituent (delineated by the substituent\u27s Hammett parameter). Those complexes with electron-withdrawing para-aniline substituents such as CO2Et (5), CF3 (6), and CN (7) have more planar chelate rings, more ‘quinoidal\u27 disortion in the aniline rings, greater chemical stability, higher oxidation potentials, and more intense (φF = 0.81 for 7 in toluene), higher-energy (blue) fluorescent emission compared to those with electron-donating substituents. Thus, for 1 the oxidation potential is 0.53 V versus Ag/AgCl (compared to 1.12 V for 7), and the emission is tuned to the yellow-green but at an expense in terms of lower quantum yields (φF = 0.07 for 1 in toluene) and increased chemical reactivity. Density functional calculations (B3LYP/6-31G*) on PM3 energy-minimized structures of the ligands and boron complexes reproduced experimentally observed data and trends and provided further insight into the nature of the electronic transitions

3D virtual laboratory for geotechnical applications: another perspective

Discrete element methods are important tools for investigating the mechanics of granular materials. In two dimensions, the reliability of these numerical approaches is increasingly being challenged, because they cannot take into account all the factors involved in the behavior of a granular medium. With new concepts, such as high performance parallel computing and 3D visualization, it is now possible to conduct numerical simulations of granular materials made up of several thousands of particles, and also to follow the evolution of the various parameters involved in the behavior of a granular medium. Experimental tests have been carried out to validate the results obtained by using a virtual laboratory. This paper presents the earlier results obtained in our 3D Virtual Laboratory on the response of specimens of glass beads of uniform size during shear tests. Good agreement was achieved between the virtual simulations and the experimental tests. This work highlights the possibility of using a new 3D virtual laboratory for dynamic simulation. This approach could be of significant value in improving the verification, validation, and communication of the simulation results of discrete element methods, which can in turn make the simulations more credible and thus useful in decision making