78 research outputs found
Athena MIMOS II Mossbauer spectrometer investigation
Mössbauer spectroscopy is a powerful tool for quantitative mineralogical analysis of Fe-bearing materials. The miniature Mössbauer spectrometer MIMOS II is a component of the Athena science payload launched to Mars in 2003 on both Mars Exploration Rover missions. The instrument has two major components: (1) a rover-based electronics board that contains power supplies, a dedicated central processing unit, memory, and associated support electronics and (2) a sensor head that is mounted at the end of the instrument deployment device (IDD) for placement of the instrument in physical contact with soil and rock. The velocity transducer operates at a nominal frequency of 25 Hz and is equipped with two 57Co/Rh Mössbauer sources. The reference source (5 mCi landed intensity), reference target (alpha-Fe2O3 plus alpha-Fe0), and PIN-diode detector are configured in transmission geometry and are internal to the instrument and used for its calibration. The analysis Mössbauer source (150 mCi landed intensity) irradiates Martian surface materials with a beam diameter of 1.4 cm. The backscatter radiation is measured by four PIN-diode detectors. Physical contact with surface materials is sensed with a switch-activated contact plate. The contact plate and reference target are instrumented with temperature sensors. Assuming 18% Fe for Martian surface materials, experiment time is 6–12 hours during the night for quality spectra (i.e., good counting statistics); 1–2 hours is sufficient to identify and quantify the most abundant Fe-bearing phases. Data stored internal to the instrument for selectable return to Earth include Mössbauer and pulse-height analysis spectra (512 and 256 channels, respectively) for each of the five detectors in up to 13 temperature intervals (65 Mössbauer spectra), engineering data for the velocity transducer, and temperature measurements. The total data volume is 150 kB. The mass and power consumption are 500 g (400 g for the sensor head) and 2 W, respectively. The scientific measurement objectives of the Mössbauer investigation are to obtain for rock, soil, and dust (1) the mineralogical identification of iron-bearing phases (e.g., oxides, silicates, sulfides, sulfates, and carbonates), (2) the quantitative measurement of the distribution of iron among these iron-bearing phases (e.g., the relative proportions of iron in olivine, pyroxenes, ilmenite, and magnetite in a basalt), (3) the quantitative measurement of the distribution of iron among its oxidation states (e.g., Fe2+, Fe3+, and Fe6+), and (4) the characterization of the size distribution of magnetic particles. Special geologic targets of the Mössbauer investigation are dust collected by the Athena magnets and interior rock and soil surfaces exposed by the Athena Rock Abrasion Tool and by trenching with rover wheels
Comparative BAC-based mapping in the white-throated sparrow, a novel behavioral genomics model, using interspecies overgo hybridization
BACKGROUND
The genomics era has produced an arsenal of resources from sequenced organisms allowing researchers to target species that do not have comparable mapping and sequence information. These new "non-model" organisms offer unique opportunities to examine environmental effects on genomic patterns and processes. Here we use comparative mapping as a first step in characterizing the genome organization of a novel animal model, the white-throated sparrow (Zonotrichia albicollis), which occurs as white or tan morphs that exhibit alternative behaviors and physiology. Morph is determined by the presence or absence of a complex chromosomal rearrangement. This species is an ideal model for behavioral genomics because the association between genotype and phenotype is absolute, making it possible to identify the genomic bases of phenotypic variation.
FINDINGS
We initiated a genomic study in this species by characterizing the white-throated sparrow BAC library via filter hybridization with overgo probes designed for the chicken, turkey, and zebra finch. Cross-species hybridization resulted in 640 positive sparrow BACs assigned to 77 chicken loci across almost all macro-and microchromosomes, with a focus on the chromosomes associated with morph. Out of 216 overgos, 36% of the probes hybridized successfully, with an average number of 3.0 positive sparrow BACs per overgo.
CONCLUSIONS
These data will be utilized for determining chromosomal architecture and for fine-scale mapping of candidate genes associated with phenotypic differences. Our research confirms the utility of interspecies hybridization for developing comparative maps in other non-model organisms
Electron Reconfiguration and Enhanced Phonon Activation in the Superconducting State of a FeSe 0.3
Laser Alloying of Steel with CrB2.
Laser alloying of surfaces arose as an interesting method for technical applications. Laser alloying permits to improve hardness as well as wear and corrosion resistance of the surface without affecting the bulk material. Samples of different steels were laser-alloyed with CrB2, by adding CrB2 to the substrate surface by powder injection during laser surface melting. The resulting surface layers were studied by Moessbauer spectroscopy (CXMS). Some XRD and SEM studies were done. The results are discussed for substrate steels with different carbon contents and for different laser parameters and feeding rates
Moessbauer Spectroscopy as a Tool to Investigate Laser-Treated Surfaces: Laser Remetting, Laser Alloying, Laser Glazing.
Transfer Function Method for Predicting the Emissions in a CISPR-25 Test-Setup
The CISPR-25 standard is used in the automotive industry to characterize the electromagnetic radiation of electronic components. The setup is comprised of an electronic device, a cable harness, a metallic table, and an antenna. Dimensions stretch from a couple of meters for the setup to fractions of a millimeter for printed circuit board features. Numerical prediction of radiated emissions (RE) is of great usefulness for prediction of potential electromagnetic compatibility nonconformities in the early design process, but extremely difficult to be done for this setup as a whole. In this paper, we demonstrate how RE can efficiently be computed based on a setup as commonly used to model conducted emissions only, i.e., electric control unit and harness on infinite-ground plane. Applying Huygens principle and using it to generate a fixed transfer function between a particularly chosen Huygens surface and the antenna, we arrive at a novel computing scheme for RE. The scheme is applied for the antenna model and antenna factor-based calculations and demonstrates agreement with measurements within 5 dB range
- …