2,265 research outputs found

    Investigation of HV/HR-CMOS technology for the ATLAS Phase-II Strip Tracker Upgrade

    Get PDF
    ATLAS has formed strip CMOS project to study the use of CMOS MAPS devices as silicon strip sensors for the Phase-II Strip Tracker Upgrade. This choice of sensors promises several advantages over the conventional baseline design, such as better resolution, less material in the tracking volume, and faster construction speed. At the same time, many design features of the sensors are driven by the requirement of minimizing the impact on the rest of the detector. Hence the target devices feature long pixels which are grouped to form a virtual strip with binary-encoded z position. The key performance aspects are radiation hardness compatibility with HL-LHC environment, as well as extraction of the full hit position with full-reticle readout architecture. To date, several test chips have been submitted using two different CMOS technologies. The AMS 350 nm is a high voltage CMOS process (HV-CMOS), that features the sensor bias of up to 120 V. The TowerJazz 180 nm high resistivity CMOS process (HR-CMOS) uses a high resistivity epitaxial layer to provide the depletion region on top of the substrate. We have evaluated passive pixel performance, and charge collection projections. The results strongly support the radiation tolerance of these devices to radiation dose of the HL-LHC in the strip tracker region. We also describe design features for the next chip submission that are motivated by our technology evaluation

    Pulsational instability of yellow hypergiants

    Full text link
    Instability of population I (X=0.7, Y=0.02) massive stars against radial oscillations during the post-main sequence gravitational contraction of the helium core is investigated. Initial stellar masses are in the range from 65M_\odot to 90M_\odot. In hydrodynamic computations of self-exciting stellar oscillations we assumed that energy transfer in the envelope of the pulsating star is due to radiative heat conduction and convection. The convective heat transfer was treated in the framework of the theory of time-dependent turbulent convection. During evolutionary expansion of outer layers after hydrogen exhaustion in the stellar core the star is shown to be unstable against radial oscillations while its effective temperature is Teff > 6700K for Mzams=65M_\odot and Teff > 7200K for mzams=90M_\odot. Pulsational instability is due to the \kappa-mechanism in helium ionization zones and at lower effective temperature oscillations decay because of significantly increasing convection. The upper limit of the period of radial pulsations on this stage of evolution does not exceed 200 day. Radial oscillations of the hypergiant resume during evolutionary contraction of outer layers when the effective temperature is Teff > 7300K for Mzams=65M_\odot and Teff > 7600K for Mzams=90M_\odot. Initially radial oscillations are due to instability of the first overtone and transition to fundamental mode pulsations takes place at higher effective temperatures (Teff > 7700K for Mzams=65M_\odot and Teff > 8200K for Mzams=90M_\odot). The upper limit of the period of radial oscillations of evolving blueward yellow hypergiants does not exceed 130 day. Thus, yellow hypergiants are stable against radial stellar pulsations during the major part of their evolutionary stage.Comment: 20 pages, 7 gigures. Accepted for publication in Astronomy Letter

    Instability of LBV-stars against radial oscillations

    Full text link
    In this study we consider the nonlinear radial oscillations exciting in LBV--stars with effective temperatures 1.5e4 K <= Teff <= 3e4 K, bolometric luminosities 1.2e6 L_odot <= L <= 1.9e6 L_odot and masses 35.7 M_odot <= M <= 49.1 M_odot. Hydrodynamic computations were carried out with initial conditions obtained from evolutionary sequences of population I stars (X=0.7, Z=0.02) with initial masses from 70M_odot to 90 M_odot. All hydrodynamical models show instability against radial oscillations with amplitude growth time comparable with dynamical time scale of the star. Radial oscillations exist in the form of nonlinear running waves propagating from the boundary of the compact core to the upper boundary of the hydrodynamical model. The velocity amplitude of outer layers is of several hundreds of km/s while the bolometric light amplitude does not exceed 0.2 mag. Stellar oscillations are not driven by the kappa-mechanism and are due to the instability of the gas with adiabatic exponent close to the critical value Gamma_1 = 4/3 due to the large contribution of radiation in the total pressure. The range of the light variation periods (6 day <= P <= 31 day) of hydrodynamical models agrees with periods of microvariability observed in LBV--stars.Comment: 14 pages, 5 figures, submitted to Astronomy Letter

    Initial Results of a Silicon Sensor Irradiation Study for ILC Extreme Forward Calorimetry

    Full text link
    Detectors proposed for the International Linear Collider (ILC) incorporate a tungsten sampling calorimeter (`BeamCal') intended to reconstruct showers of electrons, positrons and photons that emerge from the interaction point of the collider with angles between 5 and 50 milliradians. For the innermost radius of this calorimeter, radiation doses at shower-max are expected to reach 100 MRad per year, primarily due to minimum-ionizing electrons and positrons that arise in the induced electromagnetic showers of e+e- `beamstrahlung' pairs produced in the ILC beam-beam interaction. However, radiation damage to calorimeter sensors may be dominated by hadrons induced by nuclear interactions of shower photons, which are much more likely to contribute to the non-ionizing energy loss that has been observed to damage sensors exposed to hadronic radiation. We report here on the results of SLAC Experiment T-506, for which several different types of silicon diode sensors were exposed to doses of radiation induced by showering electrons of energy 3.5-10.6 GeV. By embedding the sensor under irradiation within a tungsten radiator, the exposure incorporated hadronic species that would potentially contribute to the degradation of a sensor mounted in a precision sampling calorimeter. Depending on sensor technology, efficient charge collection was observed for doses as large as 220 MRad.Comment: Talk presented at the International Workshop on Future Linear Colliders (LCWS13), Tokyo, Japan, 11-15 November 201

    Radiation Hardness of Thin Low Gain Avalanche Detectors

    Full text link
    Low Gain Avalanche Detectors (LGAD) are based on a n++-p+-p-p++ structure where an appropriate doping of the multiplication layer (p+) leads to high enough electric fields for impact ionization. Gain factors of few tens in charge significantly improve the resolution of timing measurements, particularly for thin detectors, where the timing performance was shown to be limited by Landau fluctuations. The main obstacle for their operation is the decrease of gain with irradiation, attributed to effective acceptor removal in the gain layer. Sets of thin sensors were produced by two different producers on different substrates, with different gain layer doping profiles and thicknesses (45, 50 and 80 um). Their performance in terms of gain/collected charge and leakage current was compared before and after irradiation with neutrons and pions up to the equivalent fluences of 5e15 cm-2. Transient Current Technique and charge collection measurements with LHC speed electronics were employed to characterize the detectors. The thin LGAD sensors were shown to perform much better than sensors of standard thickness (~300 um) and offer larger charge collection with respect to detectors without gain layer for fluences <2e15 cm-2. Larger initial gain prolongs the beneficial performance of LGADs. Pions were found to be more damaging than neutrons at the same equivalent fluence, while no significant difference was found between different producers. At very high fluences and bias voltages the gain appears due to deep acceptors in the bulk, hence also in thin standard detectors

    Direct imaging of a massive dust cloud around R Coronae Borealis

    Full text link
    We present recent polarimetric images of the highly variable star R CrB using ExPo and archival WFPC2 images from the HST. We observed R CrB during its current dramatic minimum where it decreased more than 9 mag due to the formation of an obscuring dust cloud. Since the dust cloud is only in the line-of-sight, it mimics a coronograph allowing the imaging of the star's circumstellar environment. Our polarimetric observations surprisingly show another scattering dust cloud at approximately 1.3" or 2000 AU from the star. We find that to obtain a decrease in the stellar light of 9 mag and with 30% of the light being reemitted at infrared wavelengths (from R CrB's SED) the grains in R CrB's circumstellar environment must have a very low albedo of approximately 0.07%. We show that the properties of the dust clouds formed around R CrB are best fitted using a combination of two distinct populations of grains size. The first are the extremely small 5 nm grains, formed in the low density continuous wind, and the second population of large grains (~0.14 {\mu}m) which are found in the ejected dust clouds. The observed scattering cloud, not only contains such large grains, but is exceptionally massive compared to the average cloud.Comment: 8 pages, 7 figures published in A&

    A New Determination of the High Redshift Type Ia Supernova Rates with the Hubble Space Telescope Advanced Camera for Surveys

    Get PDF
    We present a new measurement of the volumetric rate of Type Ia supernova up to a redshift of 1.7, using the Hubble Space Telescope (HST) GOODS data combined with an additional HST dataset covering the North GOODS field collected in 2004. We employ a novel technique that does not require spectroscopic data for identifying Type Ia supernovae (although spectroscopic measurements of redshifts are used for over half the sample); instead we employ a Bayesian approach using only photometric data to calculate the probability that an object is a Type Ia supernova. This Bayesian technique can easily be modified to incorporate improved priors on supernova properties, and it is well-suited for future high-statistics supernovae searches in which spectroscopic follow up of all candidates will be impractical. Here, the method is validated on both ground- and space-based supernova data having some spectroscopic follow up. We combine our volumetric rate measurements with low redshift supernova data, and fit to a number of possible models for the evolution of the Type Ia supernova rate as a function of redshift. The data do not distinguish between a flat rate at redshift > 0.5 and a previously proposed model, in which the Type Ia rate peaks at redshift >1 due to a significant delay from star-formation to the supernova explosion. Except for the highest redshifts, where the signal to noise ratio is generally too low to apply this technique, this approach yields smaller or comparable uncertainties than previous work.Comment: Accepted for publication in Ap

    Spectropolarimetry of R Coronae Borealis in 1998--2003: Discovery of Transient Polarization at Maximum Brightness

    Full text link
    We present an extended optical spectropolarimetry of R CrB from 1998 January to 2003 September. The polarization was almost constant in the phase of maximum brightness, being consistent with past observations. We detected, however, temporal changes of polarization (0.5\sim 0.5 %) in 2001 March and August, which were the first detection of large polarization variability in R CrB near maximum brightness. The amplitude and the position angle of the `transient polarization' were almost constant with wavelength in both two events. There was a difference by about 20 degrees in the position angle between the two events. Each event could be explained by light scattering due to short-lived dust puff occasionally ejected off the line of sight. The flatness of the polarization against the wavelength suggests that the scatterer is a mixture of dust grains having various sizes. The rapid growth and fading of the transient polarization favors the phenomenological model of dust formation near the stellar photosphere (e.g., within two stellar radii) proposed for the time evolution of brightness and chromospheric emission lines during deeply declining periods, although the fading timescale can hardly be explained by a simple dispersal of expanding dust puff with a velocity of 200350\sim 200-350 km s 1^{-1}. Higher expansion velocity or some mechanism to destroy the dust grains should be needed.Comment: 22 pages, 10 figures, accepted for publication in A

    UBVJHKLM photometry and modeling of R Coronae Borealis

    Get PDF
    We present the results of UBVJHKLM photometry of R CrB spanning the period from 1976 to 2001. Studies of the optical light curve have shown no evidence of any stable harmonics in the variations of the stellar emission. In the L band we found semi-regular oscillations with the two main periods of ~3.3 yr and 11.9 yr and the full amplitude of ~0.8 mag and ~0.6 mag, respectively. The colors of the warm dust shell (resolved by Ohnaka et al. 2001) are found to be remarkably stable in contrast to its brightness. This indicates that the inner radius is a constant, time-independent characteristic of the dust shell. The observed behavior of the IR light curve is mainly caused by the variation of the optical thickness of the dust shell within the interval \tau(V)= 0.2-0.4. Anticorrelated changes of the optical brightness (in particular with P ~ 3.3 yr) have not been found. Their absence suggests that the stellar wind of R CrB deviates from spherical symmetry. The light curves suggest that the stellar wind is variable. The variability of the stellar wind and the creation of dust clouds may be caused by some kind of activity on the stellar surface. With some time lag, periods of increased mass-loss cause an increase in the dust formation rate at the inner boundary of the extended dust shell and an increase in its IR brightness. We have derived the following parameters of the dust shell (at mean brightness) by radiative transfer modeling: inner dust shell radius r_in ~ 110 R_*, temperature T_dust(r_in) ~ 860 K, dust density \rho_dust(r_in) ~ 1.1x10^{-20} g cm^-3, optical depth \tau(V) ~ 0.32 at 0.55 micron, mean dust formation rate [dM/dt]_dust ~ 3.1x10^-9 M_sun / yr, mass-loss rate [dM/dt]_gas ~ 2.1x10^-7 M_sun / yr, size of the amorphous carbon grains <(~) 0.01 micron, and B-V ~ -0.28.Comment: 9 pages, 6 figures, accepted for publication in A&
    corecore