26 research outputs found

    Polystyrene-based nanocomposites with different fillers: fabrication and mechanical properties

    Full text link
    The paper presents a comprehensive analysis of elastic properties of polystyrene-based nanocomposites filled with different types of inclusions: small spherical particles (SiO2 and Al2O3), alumosilicates (montmorillonite, halloysite natural tubules and Mica) and carbon nanofillers (carbon black and multi-walled carbon nanotubes). Composites were fabricated by melt technology. The analysis of composite melts showed that the introduction of Montmorillonite, Multi-walled carbon nanotubes, and Al2O3 particles provided an increase in melt viscosity by an average of 2 to 5 orders of magnitude over the pure polystyrene. Block samples of composites with different filler concentrations were prepared, and their linear and nonlinear elastic properties were studied. The introduction of more rigid particles led to a more profound increase in the elastic modulus of the composite, with the highest rise of about 80% obtained with carbon fillers. Carbon black particles provided also an enhanced strength at break of about 20% higher than that of pure polystyrene. The nonlinear elastic moduli of composites were shown to be more sensitive to addition of filler particles to the polymer matrix than the linear ones. The nonlinearity coefficient β\beta comprising the combination of linear and nonlinear elastic moduli of a material demonstrated considerable changes correlating with changes of the Young's modulus. The absolute value of β\beta showed rise in 1.5-1.6 times in the CB- and HNT-containing composites as compared to that of pure PS. The changes in nonlinear elasticity of fabricated composites were compared with measurements of the parameters of bulk nonlinear strain waves in them. Variations of wave velocity and decay decrement correlated with observed enhancement of materials nonlinearity

    DEVELOPMENT OF MODES OF MILKING EQUIPMENT SANITIZATION WITH THE HELP OF «TDS» ACID DETERGENT–SANITIZER

    Get PDF
    Більшість мийно–дезінфікуючих засобів вітчизняного та закордонного виробництва для  санітарної обробки обладнання в повній мірі не відповідають новим підвищеним вимогам до санітарних умов одержання молока за якістю екстра–ґатунку. Розробка нових вітчизняних, ефективних, екологічно безпечних та дешевих засобів для санітарної обробки доїльного устаткування і молочного інвентаря є актуальною та перспективною.Нами створений кислотний мийно–дезінфікуючий засіб «ТДС», в склад якого входять азотна та лимонна кислоти, який пройшов усі лабораторні та токсикологічні дослідження.У статті наведено результати розробки режимів санітарної обробки доїльних установок з молокопроводом та доїльних залів новим кислотним мийно–дезінфікуючим засобом «ТДС».Встановлено, що 0,5 % робочий розчин кислотного засобу «ТДС» застосовують у поєднанні з лужними мийно–дезінфікуючими засобами за температури розчинів + 60 ± 5 °С та експозиції 15 − 20 хв. − для доїльних установок з молокопроводом і доїльних залів. Використання кислотного засобу «ТДС»у поєднанні з лужним засобом ”Сандез” забезпечує нормативний стан робочих поверхонь устаткування з мікробним числом змиву в середньому до 500 КУО/см3, руйнує молочний камінь та дозволяє одержати молоко свіжонадоєне з умістом мікроорганізмів 20−30 тис. КУО/см3, тобто екстра ґатунку згідно з ДСТУ 3662–97 і належної якості згідно з вимогами Європейського Союзу.Большинство моечно–дезинфицирующих средств отечественного и зарубежного производства для санитарной обработки оборудования в полной мере не соответствуют новым повышенным требованиям к санитарным условиям получения молока по качеству высшего сорта. Разработка новых отечественных, эффективных, экологически безопасных и дешевых средств для санитарной обработки доильного оборудования и молочного инвентаря есть актуальной и перспективной.Нами создано кислотное моечно–дезинфицирующее средство «ТДС», в состав которого входят азотная и лимонная кислоты, который прошел все лабораторные и токсикологические исследования.В статье приведены результаты разработки режимов санитарной обработки доильных установок с молокопроводом и доильных залов новым кислотным моечно–дезинфицирующим средством «ТДС».Установлено, что 0,5 % рабочий раствор кислотного средства «ТДС» применяют в сочетании со щелочными моечно–дезинфицирующими средствами при температуре растворов + 60 ± 5 0С и экспозиции 15 – 20 мин. – для доильных установок с молокопроводом и доильных залов. Использование кислотного средства «ТДС» в сочетании со щелочным средством «Сандез» обеспечивает нормативное состояние рабочих поверхностей оборудования с микробным числом смыва в среднем до 500 КОЕ/см3. Кислотное средство разрушает молочный камень и позволяет получить молоко свеженадоенное с содержанием микроорганизмов 20−30 тыс. КОЕ/см3, то есть экстра сорта по ДСТУ 3662–97 и надлежащего качества в соответствии с требованиями Европейского Союза.Most detergent–sanitizers of domestic and foreign production for equipment sanitization do not fully meet the new higher requirements to sanitary conditions of obtaining milk of extra quality. Developing new domestic, efficient, environmentally friendly and cheap means for sanitization of milking equipment and milk inventory is relevant and promising.We created the «TDS» acid detergent–sanitizer, which is composed of nitric and citric acids that passed all laboratory and toxicological investigations.The results of the mode of development sanitizing milking machines with the milk and milking parlors new acid washing and disinfectant «TDS»It is established that 0,5 % working solution of «TDS» acid detergent–sanitizer should be used in combination with alkaline detergent–sanitizers at a temperature of solutions + 60 ± 5 °C and 15 – 20 min exposure for milking machines with the milk and milking parlors. Consequently, the use of «TDS» acid agent in combination with alkaline agent «Sandez» provides regulatory microbiological cleanness of equipment with flushing microbial count of 500 CFU/cm3, destroys the milk stone and allows to obtain a fresh milk, which contains microorganisms of 20−30 thousands CFU/cm3, i.e. of extra quality in accordance with DSTU 3662–97 and of the proper quality according to the requirements of the European Union

    ВИЗНАЧЕННЯ ТОКСИЧНОСТІ НОВОГО ДЕЗІНФІКУЮЧОГО ЗАСОБУ ТДС

    Get PDF
    The article presents the parameters of acute toxicity and side effects of new acid–detergent disinfectant TDS, which is used to sanitize dairy liquid. It was established that the figures DL50 native solution (concentrate) disinfectant is more than 2500 mg/kg. According to its toxic properties owned disinfectant according to GHS (globally harmonized system of classification and hazard labeling of chemicals) to the V class of toxicity – low toxic substance has weak skin–irritating properties and strong locally irritating action.The working preparation solution (0,5 % concentration) for its toxic properties not classified by GHS, because DL50  is larger that 10,000 mg / kg. Working solution has no skin–irritant properties, and locally irritant effect is 24–48 hours.В статье приведены параметры острой токсичности и побочного действия нового кислотного моюще–дезинфицирующего средства ТДС, который применяется для санитарной обработки молочной посуды. Установлено, что показатели DL50 нативного раствора (концентрата) дезинфектанта — больше 2500 мг/кг. По своим токсичным свойствам дезинфектант принадлежит, согласно СГС (согласованная на глобальном уровне система классификации опасности и маркировки химической продукции), к V классу токсичности – малотоксичные вещества, обладает слабыми кожно–раздражающими свойствами и сильным местно–раздражающим действием. Рабочий раствор препарата (0,5 % концентрации) по своим токсичным свойствам не квалифицируется по СГС, поскольку его DL50 является больше 10000 мг/кг. Рабочий раствор не обладает кожно–раздражающими свойствами, а местно–раздражающее действие проявляется в течение 24–48 часов.У статті наведено параметри гострої токсичності та побічної дії нового кислотного мийно–дезінфікуючого засобу ТДС, що застосовується для санітарної обробки молочного посуду. Встановлено, що показник DL50 нативного  (розчину концентрату) дезінфектанту є більшим як 2500 мг/кг. За своїми токсичними властивостями дезінфектант належить, згідно з УГС (узгоджена на глобальному рівні система класифікації небезпеки та маркування хімічної продукції ), до V класу токсичності – малотоксичні речовини, володіє слабкими шкірно–подразнюючими властивостями та сильною місцево–падразнюючою дією.Робочий розчин препарату у 0,5 % концентрації за своїми токсичними властивостями не кваліфікується за УГС, оскільки DL50  його є більшим, ніж 10000 мг/кг. Робочий розчин не володіє шкірно–подразнюючими властивостями, а місцево–подразнююча дія проявляється протягом 24–48 годин

    Comparative Evaluation of Biomechanical Characteristics of Acellular Dermal Matrix for Hernioplasty

    Get PDF
    Background. With the introduction of synthetic mesh implants into clinical practice, the recurrence rate of postoperative ventral hernias was signifi cantly reduced. The extensive use of synthetic implants led to the development of specifi c complications. The development of biological implants, based on extensively purifi ed decellularized collagen matrix of xenogeneic origin is highly relevant due to the fact that, unlike synthetic analogues, they have a biological origin and biodegrade in a natural way, gradually being replaced with newly formed connective tissue. The use of bioprostheses reduces the risk of complications.Objectives. To conduct a comparative evaluation of the biomechanical characteristics of acellular dermal matrix, obtained by detergent-enzymatic decellularization, and commercially distributed Permacol™ matrix.Methods. Acellular dermal matrix (ADM) was created by using samples of native skin of pig of Landras breed aged 4 months. The dermis was processed by means of detergent-enzymatic method. In order to evaluate and compare the mechanical properties of acellular dermal matrix, the biological samples were divided into 2 groups of 15 samples each. The fi rst group included acellular dermal matrix samples, the second group — native samples of pigs unprocessed dermis. The control group consisted of samples of PermacolTM Surgical Implant, xenotransplant for hernioplasty approved for use in the Russian Federation (Covidien, France). All samples were tested wet using universal testing instrument Instron 1122. MedCalc Statistical Software (Belgium) was used for statistical processing of the study results.Results. In the present study, pig dermis was processed using a detergent-enzymatic method to produce ADM. Routine histological examination confi rmed the removal of all cellular elements, and at the same time it was proven that the native structure of the dermis remained intact during its processing. The mechanical characteristics of xenogenic ADM were further determined. Its tensile strength was 9.1 ± 0.6 MPa (910 N/cm2 ), elongation to break was 21.1 ± 2.3%, and elastic modulus was 50.0 ± 1.6 MPa. These characteristics largely corresponded to the strength characteristics of native pig dermis and far exceeded the necessary physiological parameters. PermacolTM control was tested in two directions (longitudinal and transverse). In the longitudinal direction, the sample had higher mechanical characteristics: strength — 12.0 ± 1.7 MPa, elongation to break — 29.7 ± 2.4%, stiffness modulus — 47.2 ± 6.5 MPa. In the transverse direction, all indicators were 1.5–2 times lower.Conclusion. The developed xenogeneic biological implant in the form of ADM demonstrates rather good characteristics of plasticity, tensile strength and elasticity, to be used as a biological endoprosthesis for plasty of hernia defects of the abdominal wall of any size and shape

    Study of air conditioning systems for storage and display of art works

    Get PDF
    The article describes technical characteristics of modern air conditioning systems that are of use to ensure the ambient conditions required for storage and display of art works in art museums. The author performs comparison analysis of centralized and autonomous air conditioning systems. The article includes an inference about how important it is to combine elements of both systems according to the design tasks and features of the integrated museum and exhibition platform (Museum Quarter in Krasnoyarsk), which includes historical buildings and new modern exhibition areas

    Резистентность к антибактериальным препаратам и бактериофагам изолятов Klebsiella pneumoniae, выделенных от детей разного возраста с кишечными инфекциями

    Get PDF
    The aim is to study the antibiotic and phage resistance of K. pneumoniae strains isolated from children with acute intestinal infections. Materials and methods. 490 K. pneumoniae strains isolated by the bacteriological method from feces from patients with intestinal infections of various etiologies aged from 1 month to 18 years in the period 2019—2021 were studied. The diagnosis of intestinal infection caused by K. pneumoniae was established taking into account the detection of the pathogen at a concentration of at least 5 lg CFU/g (n = 283; 57.8%). Children with Klebsiella seeding, made up three age groups: from 1 to 12 months of life (n = 245; 50%); from 1 to 3 years (n = 131; 26.7%); from 3 to 18 years (n = 114; 23.3%). Results. A higher frequency of K. pneumoniae seeding in high concentrations from fecal samples of children with intestinal infections aged from 1 to 12 months was established (?2 = 14.24; p < 0.001). Analysis of the frequency of K. pneumoniae resistance to antimicrobials revealed its increase to ampicillin/sulbactam from 4.2 ± 1.6% to 9.7 ± 1.9% and to gentamicin from 3.0 ± 1.3% to 7.6 ± 1.7% (p < 0.05) with an increase in the concentration of the pathogen from 3—4 to 5—6 lg CFU/ml. In K. pneumoniae strains isolated in low concentrations, resistance to polyvalent anti-klebsiella bacteriophage was significantly higher than to monovalent bacteriophage. Conclusion. Children of the first year of life belong to the risk group for the development of klebsiella intestinal infection. An increase in the frequency of K. pneumoniae resistance to ampicillin/sulbactam and gentamicin correlates with an increase in the concentration of the pathogen in fecal samples.Цель — совершенствование этиотропной терапии бактериальных ОКИ у детей различных возрастных групп на основе определения резистентности штаммов Klebsiella рneumoniae внебольничного происхождения к антибиотикам и бактериофагам. Материалы и методы. Исследованы 490 штаммов K. pneumoniae, выделенных бактериологическим методом из фекалий от больных кишечными инфекциями различной этиологии в возрасте от 1 месяца до 18 лет в период 2019—2021 гг. Диагноз кишечной инфекции, вызванной K. pneumoniae, устанавливали при обнаружении возбудителя в концентрации не менее 5 lg КОЕ/г (n = 283; 57,8%). Дети с высевом клебсиелл составили три возрастные группы: от 1 до 12 месяцев (n = 245; 50%); от 1 до 3 лет (n = 131; 26,7%); от 3 до 18 лет (n = 114; 23,3%). Результаты. Установлена более высокая частота высевов K. pneumoniae в высоких концентрациях из фекальных проб детей с кишечными инфекциями в возрасте от 1 до 12 месяцев (χ2 = 14,24; p < 0,001). Анализ частоты резистентности K. pneumoniae к антимикробным препаратам выявил ее нарастание к ампициллину/сульбактаму с 4,2 ± 1,6% до 9,7 ± 1,9% и к гентамицину с 3,0 ± 1,3% до 7,6 ± 1,7% (p < 0,05) с повышением концентрации возбудителя от 3—4 до 5—6 lg КОЕ/мл. У штаммов K. pneumoniae, выделенных в низкой концентрации, резистентность к поливалентному антиклебсиеллезному бактериофагу, была значимо выше, чем к моновалентному бактериофагу. Заключение. Дети первого года жизни относятся к группе риска по развитию клебсиеллезной кишечной инфекции. Нарастание частоты резистентности K. pneumoniae к ампициллину/сульбактаму и к гентамицину коррелирует с повышением концентрации возбудителя в пробах фекалий

    >

    No full text

    АЛГОРИТМИ ІНТРАОПЕРАЦІЙНОЇ ПРОФIЛАКТИКИ НЕСПРОМОЖНОСТІ КИШКОВИХ ШВIВ ТА АНАСТОМОЗIВ

    No full text
    The authors present their own technique of preventing the incompetence of intestinal sutures, which includes an evaluation of the viability of the intestinal wall via measuring its oxygenation, a substantiated choice of an intestinal suture, which due regard for its properties and strengthening the line of sutures owing to a local supply of medicamental remedies.Приведена авторская методика профилактики несостоятельности кишечных швов, которая включает определение жизнеспособности кишечной стенки путем измерения ее оксигенации, обоснованный выбор кишечного шва с учетом его свойств и укрепление линии швов путем локального подведения медикаментозных препаратов.Наведено авторську методику профілактики неспроможності кишкових швів, яка включає визначення життєздатності кишкової стінки шляхом вимірювання її оксигенації, обгрунтований вибір кишкового шва з врахуванням його властивостей та укріплення лінії швів завдяки локальному підведенню медикаментозних препаратів

    Linear and Nonlinear Elastic Properties of Polystyrene-Based Nanocomposites with Allotropic Carbon Fillers and Binary Mixtures

    No full text
    We report measurements of linear and nonlinear elastic properties of polystyrene-based nanocomposites with six types of nanofillers, including single and binary mixtures of allotropic carbon nanoparticles. Composite samples were fabricated by the same technology and contained the same filler concentration (5% wt.), which allowed for a direct comparison of their properties. It was shown that the most significant variations of linear and nonlinear elastic properties occur in different nanocomposites. In particular, the most pronounced enhancements of linear elastic moduli (in about 50%) obtained in tensile and flexural tests and in dynamic mechanical analysis were recorded in the sample filled with spherical fullerene nanoparticles. While the most profound rise of absolute values of nonlinear elastic moduli (tens of times) was obtained in the sample filled with the mixture of carbon nanotubes and graphene. The observed tendencies demonstrated the synergistic effect of fillers of different dimensionality on the elastic properties of nanocomposites
    corecore