368 research outputs found
Internal stresses in steel plate generated by shape memory alloy inserts
Neutron strain scanning was employed to investigate the internal stress fields in steel plate coupons with embedded prestrained superelastic NiTi shape memory alloy inserts. Strain fields in steel were evaluated at T = 21 °C and 130 °C on virgin coupons as well as on mechanically and thermally fatigued coupons. Internal stress fields were evaluated by direct calculation of principal stress components from the experimentally measured lattice strains as well as by employing an inverse finite element modeling approach. It is shown that if the NiTi inserts are embedded into the elastic steel matrix following a carefully designed technological procedure, the internal stress fields vary with temperature in a reproducible and predictable way. It is estimated that this mechanism of internal stress generation can be safely applied in the temperature range from −20 °C to 150 °C and is relatively resistant to thermal and mechanical fatigue. The predictability and fatigue endurance of the mechanism are of essential importance for the development of future smart metal matrix composites or smart structures with embedded shape memory alloy components
Tomographic capabilities of the new GEM based SXR diagnostic of WEST
International audienceThe tokamak WEST (Tungsten Environment in Steady-State Tokamak) will start operating by the end of 2016 as a test bed for the ITER divertor components in long pulse operation. In this context, radiative cooling of heavy impurities like tungsten (W) in the Soft X-ray (SXR) range [0.1 keV; 20 keV] is a critical issue for the plasma core performances. Thus reliable tools are required to monitor the local impurity density and avoid W accumulation. The WEST SXR diagnostic will be equipped with two new GEM (Gas Electron Multiplier) based poloidal cameras allowing to perform 2D tomographic reconstructions in tunable energy bands. In this paper tomographic capabilities of the Minimum Fisher Information (MFI) algorithm developed for Tore Supra and upgraded for WEST are investigated, in particular through a set of emissivity phantoms and the standard WEST scenario including reconstruction errors, influence of noise as well as computational time
The electronic properties of bilayer graphene
We review the electronic properties of bilayer graphene, beginning with a
description of the tight-binding model of bilayer graphene and the derivation
of the effective Hamiltonian describing massive chiral quasiparticles in two
parabolic bands at low energy. We take into account five tight-binding
parameters of the Slonczewski-Weiss-McClure model of bulk graphite plus intra-
and interlayer asymmetry between atomic sites which induce band gaps in the
low-energy spectrum. The Hartree model of screening and band-gap opening due to
interlayer asymmetry in the presence of external gates is presented. The
tight-binding model is used to describe optical and transport properties
including the integer quantum Hall effect, and we also discuss orbital
magnetism, phonons and the influence of strain on electronic properties. We
conclude with an overview of electronic interaction effects.Comment: review, 31 pages, 15 figure
Structural correlations in heterogeneous electron transfer at monolayer and multilayer graphene electrodes
As a new form of carbon, graphene is attracting intense interest as an electrode material with widespread applications. In the present study, the heterogeneous electron transfer (ET) activity of graphene is investigated using scanning electrochemical cell microscopy (SECCM), which allows electrochemical currents to be mapped at high spatial resolution across a surface for correlation with the corresponding structure and properties of the graphene surface. We establish that the rate of heterogeneous ET at graphene increases systematically with the number of graphene layers, and show that the stacking in multilayers also has a subtle influence on ET kinetics. © 2012 American Chemical Society
Guidelines of the French Society of Otorhinolaryngology (SFORL), short version. Extension assessment and principles of resection in cutaneous head and neck tumors
AbstractCutaneous head and neck tumors mainly comprise malignant melanoma, squamous cell carcinoma, trichoblastic carcinoma, Merkel cell carcinoma, adnexal carcinoma, dermatofibrosarcoma protuberans, sclerodermiform basalioma and angiosarcoma. Adapted management requires an experienced team with good knowledge of the various parameters relating to health status, histology, location and extension: risk factors for aggression, extension assessment, resection margin requirements, indications for specific procedures, such as lateral temporal bone resection, orbital exenteration, resection of the calvarium and meningeal envelopes, neck dissection and muscle resection
Negative Thermal Expansion Coefficient of Graphene Measured by Raman Spectroscopy
The thermal expansion coefficient (TEC) of single-layer graphene is estimated
with temperature-dependent Raman spectroscopy in the temperature range between
200 and 400 K. It is found to be strongly dependent on temperature but remains
negative in the whole temperature range, with a room temperature value of
-8.0x10^{-6} K^{-1}. The strain caused by the TEC mismatch between graphene and
the substrate plays a crucial role in determining the physical properties of
graphene, and hence its effect must be accounted for in the interpretation of
experimental data taken at cryogenic or elevated temperatures.Comment: 17 pagese, 3 figures, and supporting information (4 pages, 3
figures); Nano Letters, 201
A new Raman metric for the characterisation of graphene oxide and its derivatives
Raman spectroscopy is among the primary techniques for the characterisation of graphene materials, as it provides insights into the quality of measured graphenes including their structure and conductivity as well as the presence of dopants. However, our ability to draw conclusions based on such spectra is limited by a lack of understanding regarding the origins of the peaks. Consequently, traditional characterisation techniques, which estimate the quality of the graphene material using the intensity ratio between the D and the G peaks, are unreliable for both GO and rGO. Herein we reanalyse the Raman spectra of graphenes and show that traditional methods rely upon an apparent G peak which is in fact a superposition of the G and D’ peaks. We use this understanding to develop a new Raman characterisation method for graphenes that considers the D’ peak by using its overtone the 2D’. We demonstrate the superiority and consistency of this method for calculating the oxygen content of graphenes, and use the relationship between the D’ peak and graphene quality to define three regimes. This has important implications for purification techniques because, once GO is reduced beyond a critical threshold, further reduction offers limited gain in conductivity
Probing Mechanical Properties of Graphene with Raman Spectroscopy
The use of Raman scattering techniques to study the mechanical properties of
graphene films is reviewed here. The determination of Gruneisen parameters of
suspended graphene sheets under uni- and bi-axial strain is discussed and the
values are compared to theoretical predictions. The effects of the
graphene-substrate interaction on strain and to the temperature evolution of
the graphene Raman spectra are discussed. Finally, the relation between
mechanical and thermal properties is presented along with the characterization
of thermal properties of graphene with Raman spectroscopy.Comment: To appear in the Journal of Materials Scienc
- …