485 research outputs found

    The Unseen Face of E-Business Project Development

    Get PDF
    The purpose of this paper is intent on identify and analyze the unseen factors of successful or failure of e-business project development. The IT managers must take into account both all costs involved in e-business development and all phases (analysis, design, testing, implementation, maintenance and operation) according to principle of project management for software/systems life cycle development. There are many solutions to exceed these factors of failure among could be counted outsourcing, a good project management, involvement of senior management, a real cost estimation etc.Zadanie pt. „Digitalizacja i udostępnienie w Cyfrowym Repozytorium Uniwersytetu Łódzkiego kolekcji czasopism naukowych wydawanych przez Uniwersytet Łódzki” nr 885/P-DUN/2014 zostało dofinansowane ze środków MNiSW w ramach działalności upowszechniającej nauk

    Performance of base connections for concrete segmental communication tower

    Get PDF
    Demand for communication towers has increased in the last several years due to revolution in the networking domain. Recently, advancements in the field of material and structural engineering have yielded several types of concretes such as ultra-high performance fibre-reinforced concrete (UHPFRC) which is particularly used for special structures. Generally, the connection of concrete segments in the foundation is constructed through dry joints with appropriate shear strength for transferring the imposed lateral loads such as wind loads, earthquake or vibrations from the structure to the foundations. Therefore, the connection in the foundation is considered as the critical point in a cylindrical tower because the height of the tower causes huge lateral load. This study presents an experimental and FE simulation to investigate the behavior of circular flange-bolted connections (CFBCs) as a common connection for precast segments of a hollow section tower subjected to a lateral cyclic load. On this basis, a precast UHPFRC communication tower located in Ipoh, Malaysia is considered. Results of experimental tests and numerical analyses showed a close agreement with each other. According to the test results, the foundation connection with bolts and epoxy demonstrated resistance against high lateral forces when lateral cyclic loads were applied

    Экспериментальная оценка влияния ультразвука на производительность и качество алмазной доводки хрупких материалов

    Get PDF
    The paper gives main principles of the methodology for execution of experimental investigations with the help of principally newly designed ultrasound machine-tool with acoustic system which is set in the spindle unit. Treatment of a number of semi-precious stones and mono-crystals by diamond tools of various graininess has revealed dominating technological factors that influence on quantitative and qualitative process indice. Mechanisms of inter-relation of a lapping disk and a treated piece with directed action of ultrasound oscillation are given in the paper. The obtained results testify efficiency of ultrasound application for treatment of hard and fragile materials (crystals).Приводятся основные положения методики проведения экспериментальных исследований на принципиально новой конструкции ультразвукового станка с акустической системой в шпиндельном узле. В результате обработки ряда поделочных камней и монокристаллов алмазоносными инструментами различной зернистости получены результаты, которые выявили доминирующие технологические факторы, влияющие на количественные и качественные показатели процесса. Даны механизмы взаимодействия диска-притира и обрабатываемого изделия при направленном действии ультразвуковых колебаний. Результаты свидетельствуют об эффективности использования ультразвука при обработке твердых и хрупких материалов (кристаллов)

    Risk assessment for the spread of Serratia marcescens within dental-unit waterline systems using Vermamoeba vermiformis

    Get PDF
    Vermamoeba vermiformis is associated with the biofilm ecology of dental-unit waterlines (DUWLs). This study investigated whether V. vermiformis is able to act as a vector for potentially pathogenic bacteria and so aid their dispersal within DUWL systems. Clinical dental water was initially examined for Legionella species by inoculating it onto Legionella selective-medium plates. The molecular identity/profile of the glassy colonies obtained indicated none of these isolates were Legionella species. During this work bacterial colonies were identified as a non-pigmented Serratia marcescens. As the water was from a clinical DUWL which had been treated with Alpron™ this prompted the question as to whether S. marcescens had developed resistance to the biocide. Exposure to Alpron™ indicated that this dental biocide was effective, under laboratory conditions, against S. marcescens at up to 1x108 colony forming units/millilitre (cfu/ml). V. vermiformis was cultured for eight weeks on cells of S. marcescens and Escherichia coli. Subsequent electron microscopy showed that V. vermiformis grew equally well on S. marcescens and E. coli (p = 0.0001). Failure to detect the presence of S. marcescens within the encysted amoebae suggests that V. vermiformis is unlikely to act as a vector supporting the growth of this newly isolated, nosocomial bacterium

    Optimization of flow shop scheduling through a hybrid genetic algorithm for manufacturing companies

    Get PDF
    A task scheduling problem is a process of assigning tasks to a limited set of resources available in a time interval, where certain criteria are optimized. In this way, the sequencing of tasks is directly associated with the executability and optimality of a preset plan and can be found in a wide range of applications, such as: programming flight dispatch at airports, programming production lines in a factory, programming of surgeries in a hospital, repair of equipment or machinery in a workshop, among others. The objective of this study is to analyze the effect of the inclusion of several restrictions that negatively influence the production programming in a real manufacturing environment. For this purpose, an efficient Genetic Algorithm combined with a Local Search of Variable Neighborhood for problems of n tasks and m machines is introduced, minimizing the time of total completion of the tasks. The computational experiments carried out on a set of problem instances with different sizes of complexity show that the proposed hybrid metaheuristics achieves high quality solutions compared to the reported optimal cases

    Climate policy implications for agricultural water demand

    Get PDF
    Energy, water and land are scarce resources, critical to humans. Developments in each affect the availability and cost of the others, and consequently human prosperity. Measures to limit greenhouse gas concentrations will inevitably exact dramatic changes on energy and land systems and in turn alter the character, magnitude and geographic distribution of human claims on water resources. We employ the Global Change Assessment Model (GCAM), an integrated assessment model to explore the interactions of energy, land and water systems in the context of alternative policies to limit climate change to three alternative levels: 2.5 Wm-2 (445 ppm CO2-e), 3.5 Wm-2 (535 ppm CO2-e) and 4.5 Wm-2 (645 ppm CO2-e). We explore the effects of two alternative land-use emissions mitigation policy options—one which taxes terrestrial carbon emissions equally with fossil fuel and industrial emissions, and an alternative which only taxes fossil fuel and industrial emissions but places no penalty on land-use change emissions. We find that increasing populations and economic growth could be anticipated to almost triple demand for water for agricultural systems across the century even in the absence of climate policy. In general policies to mitigate climate change increase agricultural demands for water still further, though the largest changes occur in the second half of the century, under both policy regimes. The two policies examined profoundly affected both the sources and magnitudes of the increase in irrigation water demands. The largest increases in agricultural irrigation water demand occurred in scenarios where only fossil fuel emissions were priced (but not land-use change emission) and were primarily driven by rapid expansion in bioenergy production. In these scenarios water demands were large relative to present-day total available water, calling into question whether it would be physically possible to produce the associated biomass energy. We explored the potential of improved water delivery and irrigation system efficiencies. These could potentially reduce demands substantially. However, overall demands remained high under our fossil-fuel-only tax policy. In contrast, when all carbon was priced, increases in agricultural water demands were smaller than under the fossil-fuel-only policy and were driven primarily by increased demands for water by non-biomass crops such as rice. Finally we estimate the geospatial pattern of water demands and find that regions such as China, India and other countries in south and east Asia might be expected to experience greatest increases in water demands

    Serratia marcescens Is Able to Survive and Proliferate in Autophagic-Like Vacuoles inside Non-Phagocytic Cells

    Get PDF
    Serratia marcescens is an opportunistic human pathogen that represents a growing problem for public health, particularly in hospitalized or immunocompromised patients. However, little is known about factors and mechanisms that contribute to S. marcescens pathogenesis within its host. In this work, we explore the invasion process of this opportunistic pathogen to epithelial cells. We demonstrate that once internalized, Serratia is able not only to persist but also to multiply inside a large membrane-bound compartment. This structure displays autophagic-like features, acquiring LC3 and Rab7, markers described to be recruited throughout the progression of antibacterial autophagy. The majority of the autophagic-like vacuoles in which Serratia resides and proliferates are non-acidic and have no degradative properties, indicating that the bacteria are capable to either delay or prevent fusion with lysosomal compartments, altering the expected progression of autophagosome maturation. In addition, our results demonstrate that Serratia triggers a non-canonical autophagic process before internalization. These findings reveal that S. marcescens is able to manipulate the autophagic traffic, generating a suitable niche for survival and proliferation inside the host cell

    Length versus radius relationship for ZnO nanowires grown via vapour phase transport

    Get PDF
    We model the growth of ZnO nanowires via vapour phase transport and examine the relationship predicted between the nanowire length and radius. The model predicts that the lengths of the nanowires increase with decreasing nanowire radii. This prediction is in very good agreement with experimental data from a variety of nanowire samples, including samples showing a broad range of nanowire radii and samples grown using a lithographic technique to constrain the nanowire radius. The close agreement of the model and the experimental data strongly support supporting the inclusion of a surface diffusion term in the model for the incorporation of species into a growing nanowire

    Global, regional, and national comparative risk assessment of 79 behavioural, environmental and occupational, and metabolic risks or clusters of risks, 1990-2015: a systematic analysis for the Global Burden of Disease Study 2015

    Get PDF
    SummaryBackground The Global Burden of Diseases, Injuries, and Risk Factors Study 2015 provides an up-to-date synthesis of the evidence for risk factor exposure and the attributable burden of disease. By providing national and subnational assessments spanning the past 25 years, this study can inform debates on the importance of addressing risks in context. Methods We used the comparative risk assessment framework developed for previous iterations of the Global Burden of Disease Study to estimate attributable deaths, disability-adjusted life-years (DALYs), and trends in exposure by age group, sex, year, and geography for 79 behavioural, environmental and occupational, and metabolic risks or clusters of risks from 1990 to 2015. This study included 388 risk-outcome pairs that met World Cancer Research Fund-defined criteria for convincing or probable evidence. We extracted relative risk and exposure estimates from randomised controlled trials, cohorts, pooled cohorts, household surveys, census data, satellite data, and other sources. We used statistical models to pool data, adjust for bias, and incorporate covariates. We developed a metric that allows comparisons of exposure across risk factors—the summary exposure value. Using the counterfactual scenario of theoretical minimum risk level, we estimated the portion of deaths and DALYs that could be attributed to a given risk. We decomposed trends in attributable burden into contributions from population growth, population age structure, risk exposure, and risk-deleted cause-specific DALY rates. We characterised risk exposure in relation to a Socio-demographic Index (SDI). Findings Between 1990 and 2015, global exposure to unsafe sanitation, household air pollution, childhood underweight, childhood stunting, and smoking each decreased by more than 25%. Global exposure for several occupational risks, high body-mass index (BMI), and drug use increased by more than 25% over the same period. All risks jointly evaluated in 2015 accounted for 57·8% (95% CI 56·6–58·8) of global deaths and 41·2% (39·8–42·8) of DALYs. In 2015, the ten largest contributors to global DALYs among Level 3 risks were high systolic blood pressure (211·8 million [192·7 million to 231·1 million] global DALYs), smoking (148·6 million [134·2 million to 163·1 million]), high fasting plasma glucose (143·1 million [125·1 million to 163·5 million]), high BMI (120·1 million [83·8 million to 158·4 million]), childhood undernutrition (113·3 million [103·9 million to 123·4 million]), ambient particulate matter (103·1 million [90·8 million to 115·1 million]), high total cholesterol (88·7 million [74·6 million to 105·7 million]), household air pollution (85·6 million [66·7 million to 106·1 million]), alcohol use (85·0 million [77·2 million to 93·0 million]), and diets high in sodium (83·0 million [49·3 million to 127·5 million]). From 1990 to 2015, attributable DALYs declined for micronutrient deficiencies, childhood undernutrition, unsafe sanitation and water, and household air pollution; reductions in risk-deleted DALY rates rather than reductions in exposure drove these declines. Rising exposure contributed to notable increases in attributable DALYs from high BMI, high fasting plasma glucose, occupational carcinogens, and drug use. Environmental risks and childhood undernutrition declined steadily with SDI; low physical activity, high BMI, and high fasting plasma glucose increased with SDI. In 119 countries, metabolic risks, such as high BMI and fasting plasma glucose, contributed the most attributable DALYs in 2015. Regionally, smoking still ranked among the leading five risk factors for attributable DALYs in 109 countries; childhood underweight and unsafe sex remained primary drivers of early death and disability in much of sub-Saharan Africa. Interpretation Declines in some key environmental risks have contributed to declines in critical infectious diseases. Some risks appear to be invariant to SDI. Increasing risks, including high BMI, high fasting plasma glucose, drug use, and some occupational exposures, contribute to rising burden from some conditions, but also provide opportunities for intervention. Some highly preventable risks, such as smoking, remain major causes of attributable DALYs, even as exposure is declining. Public policy makers need to pay attention to the risks that are increasingly major contributors to global burden. Funding Bill & Melinda Gates Foundation
    corecore