Antibacterial Polysiloxane Polymers and Coatings for Cochlear Implants

Within this study, new materials were synthesized and characterized based on polysiloxane modified with different ratios of N-acetyl-l-cysteine (NAC) and crosslinked via UV-assisted thiol-ene addition, in order to obtain efficient membranes able to resist bacterial adherence and biofilm formation. These membranes were subjected to in vitro testing for microbial adherence against S. pneumoniae using standardized tests. WISTAR rats were implanted for 4 weeks with crosslinked siloxane samples without and with NAC. A set of physical characterization methods was employed to assess the chemical structure and morphological aspects of the new synthetized materials before and after contact with the microbiological medium

Toxicity assessment of long-term exposure to non-thermal plasma activated water in mice

Non-thermal plasma activated water (PAW) has recently emerged as a powerful antimicrobial agent. Despite numerous potential bio-medical applications, studies concerning toxicity in live animals, especially after long-term exposure, are scarce. Our study aimed to assess the effects of long-term watering with PAWon the health of CD1 mice. PAWwas prepared from distilled water with a GlidArc reactor according to a previously published protocol. The pH was 2.78. The mice received PAW(experimental group) or tap water (control group) daily for 90 days as the sole water source. After 90 days, the following investigations were performed on the euthanatized animals: gross necropsy, teeth mineral composition, histopathology, immunohistochemistry, hematology, blood biochemistry, methemoglobin level and cytokine profile. Mice tolerated PAWvery well and no adverse effects were observed during the entire period of the experiment. Histopathological examination of the organs and tissues did not reveal any structural changes. Moreover, the expression of proliferation markers PCNA and Ki67 has not been identified in the epithelium of the upper digestive tract, indicating the absence of any pre- or neoplastic transformations. The results of our study demonstrated that long-term exposure to PAWcaused no toxic effects and could be used as oral antiseptic solution in dental medicine

Phyto-Functionalized Silver Nanoparticles Derived from Conifer Bark Extracts and Evaluation of Their Antimicrobial and Cytogenotoxic Effects

Silver nanoparticles synthesized using plant extracts as reducing and capping agents showed various biological activities. In the present study, colloidal silver nanoparticle solutions were produced from the aqueous extracts of Picea abies and Pinus nigra bark. The phenolic profile of bark extracts was analyzed by liquid chromatography coupled to mass spectrometry. The synthesis of silver nanoparticles was monitored using UV-Vis spectroscopy by measuring the Surface Plasmon Resonance band. Silver nanoparticles were characterized by attenuated total reflection Fourier transform infrared spectroscopy, Raman spectroscopy, dynamic light scattering, scanning electron microscopy, energy dispersive X-ray and transmission electron microscopy analyses. The antimicrobial and cytogenotoxic effects of silver nanoparticles were evaluated by disk diffusion and Allium cepa assays, respectively. Picea abies and Pinus nigra bark extract derived silver nanoparticles were spherical (mean hydrodynamic diameters of 78.48 and 77.66 nm, respectively) and well dispersed, having a narrow particle size distribution (polydispersity index values of 0.334 and 0.224, respectively) and good stability (zeta potential values of −10.8 and −14.6 mV, respectively). Silver nanoparticles showed stronger antibacterial, antifungal, and antimitotic effects than the bark extracts used for their synthesis. Silver nanoparticles obtained in the present study are promising candidates for the development of novel formulations with various therapeutic applications

<scp>ReSurveyEurope</scp>: A database of resurveyed vegetation plots in Europe

AbstractAimsWe introduce ReSurveyEurope — a new data source of resurveyed vegetation plots in Europe, compiled by a collaborative network of vegetation scientists. We describe the scope of this initiative, provide an overview of currently available data, governance, data contribution rules, and accessibility. In addition, we outline further steps, including potential research questions.ResultsReSurveyEurope includes resurveyed vegetation plots from all habitats. Version 1.0 of ReSurveyEurope contains 283,135 observations (i.e., individual surveys of each plot) from 79,190 plots sampled in 449 independent resurvey projects. Of these, 62,139 (78%) are permanent plots, that is, marked in situ, or located with GPS, which allow for high spatial accuracy in resurvey. The remaining 17,051 (22%) plots are from studies in which plots from the initial survey could not be exactly relocated. Four data sets, which together account for 28,470 (36%) plots, provide only presence/absence information on plant species, while the remaining 50,720 (64%) plots contain abundance information (e.g., percentage cover or cover–abundance classes such as variants of the Braun‐Blanquet scale). The oldest plots were sampled in 1911 in the Swiss Alps, while most plots were sampled between 1950 and 2020.ConclusionsReSurveyEurope is a new resource to address a wide range of research questions on fine‐scale changes in European vegetation. The initiative is devoted to an inclusive and transparent governance and data usage approach, based on slightly adapted rules of the well‐established European Vegetation Archive (EVA). ReSurveyEurope data are ready for use, and proposals for analyses of the data set can be submitted at any time to the coordinators. Still, further data contributions are highly welcome.</jats:sec

Evaluation of the Antifungal Activity of Gold–Chitosan and Carbon Nanoparticles on Fusarium oxysporum

Nanoparticles are implemented in different biotechnological fields, and there is interest in their use in plant biology. Nanotechnology can help overcome the persistent limitations of using conventional fungicides in the management of plant diseases, contributing to a safer environment. Hence, this study is focused on evaluating the behavior of nanoparticles on two different strains of Fusarium oxysporum, which have a wide-ranging occurrence in tomato production and account for important economic losses. Fusarium oxysporum is an ascomycetous fungus that is well-known as a soilborne plant pathogen, adapted to any soil type, and it lives in different forms on organic materials. Gold&ndash;chitosan and carbon nanoparticles were suspended in potato dextrose agar growth media, and their antifungal activity was evaluated at 1, 3, 5, and 7 days after incubation by measuring the diameter of fungal colonies. The results showed that the nanoparticles have antifungal properties against F. oxysporum, the fungal colony growth diameter being reduced. Likewise, it was observed that the colony diameter was smaller when the nanoparticle concentration increased. However, in the case of one F. oxysporum strain, the highest nanoparticle concentration applied during the experiment&rsquo;s execution was not able to completely inhibit fungal growth

Room Temperature Deposition of Nanocrystalline SiC Thin Films by DCMS/HiPIMS Co-Sputtering Technique

Due to an attractive combination of chemical and physical properties, silicon carbide (SiC) thin films are excellent candidates for coatings to be used in harsh environment applications or as protective coatings in heat exchanger applications. This work reports the deposition of near-stoichiometric and nanocrystalline SiC thin films, at room temperature, on silicon (100) substrates using a DCMS/HiPIMS co-sputtering technique (DCMS&mdash;direct current magnetron sputtering; HiPIMS&mdash;high-power impulse magnetron sputtering). Their structural and mechanical properties were analyzed as a function of the process gas pressure. The correlation between the films&rsquo; microstructure and their mechanical properties was thoroughly investigated. The microstructure and morphology of these films were examined by appropriate microscopic and spectroscopic methods: atomic force microscopy (AFM), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD), and Raman spectroscopy, while their mechanical and tribological properties were evaluated by instrumented indentation and micro-scratch techniques. The lowest value of the working gas pressure resulted in SiC films of high crystallinity, as well as in an improvement in their mechanical performances. Both hardness (H) and Young&rsquo;s modulus (E) values were observed to be significantly influenced by the sputtering gas pressure. Decreasing the gas pressure from 2.0 to 0.5 Pa led to an increase in H and E values from 8.2 to 20.7 GPa and from 106.3 to 240.0 GPa, respectively. Both the H/E ratio and critical adhesion load values follow the same trend and increase from 0.077 to 0.086 and from 1.55 to 3.85 N, respectively

Matching the Cellulose/Silica Films Surface Properties for Design of Biomaterials That Modulate Extracellular Matrix

The surface properties of composite films are important to know for many applications from the industrial domain to the medical domain. The physical and chemical characteristics of film/membrane surfaces are totally different from those of the bulk due to the surface segregation of the low surface energy components. Thus, the surfaces of cellulose acetate/silica composite films are analyzed in order to obtain information on the morphology, topography and wettability through atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS) and contact angle investigations. The studied composite films present different surface properties depending on the tetraethyl orthosilicate (TEOS) content from the casting solutions. Up to a content of 1.5 wt.% TEOS, the surface roughness and hydrophobicity increase, after which there is a decrease in these parameters. This behavior suggests that up to a critical amount of TEOS, the results are influenced by the morphology and topographical features, after which a major role seems to be played by surface chemistry&mdash;increasing the oxygenation surfaces. The morphological and chemical details and also the hydrophobicity/hydrophilicity characteristics are discussed in the attempt to design biological surfaces with optimal wettability properties and possibility of application in tissue engineering

Matching the Cellulose/Silica Films Surface Properties for Design of Biomaterials That Modulate Extracellular Matrix

The surface properties of composite films are important to know for many applications from the industrial domain to the medical domain. The physical and chemical characteristics of film/membrane surfaces are totally different from those of the bulk due to the surface segregation of the low surface energy components. Thus, the surfaces of cellulose acetate/silica composite films are analyzed in order to obtain information on the morphology, topography and wettability through atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS) and contact angle investigations. The studied composite films present different surface properties depending on the tetraethyl orthosilicate (TEOS) content from the casting solutions. Up to a content of 1.5 wt.% TEOS, the surface roughness and hydrophobicity increase, after which there is a decrease in these parameters. This behavior suggests that up to a critical amount of TEOS, the results are influenced by the morphology and topographical features, after which a major role seems to be played by surface chemistry—increasing the oxygenation surfaces. The morphological and chemical details and also the hydrophobicity/hydrophilicity characteristics are discussed in the attempt to design biological surfaces with optimal wettability properties and possibility of application in tissue engineering

Injectable Thixotropic β–Cyclodextrin–Functionalized Hydrogels Based on Guanosine Quartet Assembly

Facile method for the preparation of β–cyclodextrin–functionalized hydrogels based on guanosine quartet assembly was described. A series of seven hydrogels were prepared by linking β–cyclodextrin molecules with guanosine moieties in different ratios through benzene–1,4–diboronic acid linker in the presence of potassium hydroxide. The potassium ions acted as a reticulation agent by forming guanosine quartets, leading to the formation of self–sustained transparent hydrogels. The ratios of the β–cyclodextrin and guanosine components have a significant effect on the internal structuration of the components and, correspondingly, on the mechanical properties of the final gels, offering a tunablity of the system by varying the components ratio. The insights into the hydrogels’ structuration were achieved by circular dichroism, scanning electron microscopy, atomic force microscopy, and X–ray diffraction. Rheological measurements revealed self–healing and thixotropic properties of all the investigated samples, which, in combination with available cyclodextrin cavities for active components loading, make them remarkable candidates for specific applications in biomedical and pharmaceutical fields. Moreover, all the prepared samples displayed selective antimicrobial properties against S. aureus in planktonic and biofilm phase, the activity also depending on the guanosine and cyclodextrin ratio within the hydrogel structure