Nonlinear femtosecond pulse propagation in an all-solid photonic bandgap fiber

Nonlinear femtosecond pulse propagation in an all-solid photonic bandgap fiber is experimentally and numerically investigated. Guiding light in such fiber occurs via two mechanisms: photonic bandgap in the central silica core or total internal reflection in the germanium doped inclusions. By properly combining spectral filtering, dispersion tailoring and pump coupling into the fiber modes, we experimentally demonstrate efficient supercontinuum generation with controllable spectral bandwidth

Bound -> free and bound -> bound multichannel emission spectra from selectively excited Rydberg states in the ZnAr and CdAr van der Waals complexes

Multichannel dispersed emission spectra recorded upon a selective excitation of Rydberg electronic energy states in the ZnAr and CdAr van der Waals (vdW) complexes are analysed as a proof-of-concept of the future experimental approach. Simulations of the emission spectra are based on ab-initio calculated interatomic potentials and transition dipole moments (TDMs). Experimental set-up that is under construction along with the experimental procedure are discussed

Polarimetric sensitivity to hydrostatic pressure and temperature in birefringent dual-core microstructured polymer fiber

We experimentally characterized a birefringent microstructured polymer fiber of specific construction, which allows for single mode propagation in two cores separated by a pair of large holes. The fiber exhibits high birefringence in each of the cores as well as relatively weak coupling between the cores. Spectral dependence of the group and the phase modal birefringence was measured using an interferometric method. We have also measured the sensing characteristics of the fiber such as the polarimetric sensitivity to hydrostatic pressure and temperature

Measurements of stress-optic coefficient in polymer optical fibers

We have systematically measured the differential stress-optic coefficient, ?C, in a number of poly(methyl methacrylate) (PMMA) fibers drawn with different stress, ranging from 2 up to 27 MPa. ?C was determined in transverse illumination by measuring the dependence of birefringence on additional axial stress applied to the fiber. Our results show that ?C in PMMA fibers has a negative sign and ranges from -4.5 to -4.5×10-12 Pa-1, depending on the drawing stress. Increase of the drawing stress results in greater initial fiber birefringence and lower ?C

Effect of dielectric medium anisotropy on the polarization degree of emission from a single quantum dash

This research was supported by the Polish Ministry of Science and Higher Education/the National Science Center Grant No. 2011/02/A/ST3/00152. The experiments have partially been performed within the laboratory infrastructure financed by the Polish Ministry of Science and Higher Education Grant No. 6167/IA/119/2012.Excitonic emission from single InAs/InGaAlAs/InP quantum dashes has been investigated in the context of degree of linear polarization by post-growth modification of its surrounding dielectric medium. We present optical spectroscopy measurements on a symmetric squared pedestal structures (mesas), and asymmetric rectangular ones oriented parallel or perpendicular to the main in-plane axis of the dashes [1-10]. Polarization resolved microphotoluminescence shows a significant quantitative modification of the degree of linear polarization value from -20% up to 70%. These results have been confronted with calculations of the coupling between the exciton transition dipole moment and electromagnetic field distributed in the vicinity of a quantum dash inside a processed mesa.Postprin

Photonic skins for optical sensing:highlights of the PHOSFOS project

PHOSFOS (Photonic Skins For Optical Sensing) is a research project funded by the European Commission's 7th Framework Programme. The project aims at developing a flexible and stretchable foil that integrates highly advanced optical fibre sensing elements as well as optical and electrical powering functionalities and read-out of the sensors. This skin-like foil can be wrapped around or attached to irregularly shaped objects or bodies and will allow quasi-distributed sensing of mechanical quantities such as deformation and pressure. The applications targeted can be found in the fields of structural health monitoring and healthcare

Measurements of stress-optic coefficient and Young's modulus in PMMA fibers drawn under different conditions

We have systematically measured the differential stress-optic coefficient, ΔC, and Young's modulus, E, in a number of PMMA fibers drawn with different stress, ranging from 2 up to 27 MPa. Effect of temperature annealing on those parameters was also investigated. ΔC was determined in transverse illumination by measuring the dependence of birefringence on additional axial stress applied to the fiber. Our results show that ΔC in PMMA fibers has a negative sign and ranges from -4.5 to -1.5×10-12 Pa -1 depending on the drawing stress. Increase of the drawing stress results in greater initial fiber birefringence and lower ΔC. The dependence of ΔC and initial birefringence upon drawing stress is nonlinear and gradually saturates for higher drawing stress. Moreover, we find that ΔC is linearly proportional to initial fiber birefringence and that annealing the fiber has no impact on the slope of this dependence. On the other hand, no clear dependence was observed between the fiber drawing stress and the Young's modulus of the fibers as measured using microscopic digital image correlation with the fibers tensioned using an Instron tension tester

The LAGUNA design study- towards giant liquid based underground detectors for neutrino physics and astrophysics and proton decay searches

The feasibility of a next generation neutrino observatory in Europe is being considered within the LAGUNA design study. To accommodate giant neutrino detectors and shield them from cosmic rays, a new very large underground infrastructure is required. Seven potential candidate sites in different parts of Europe and at several distances from CERN are being studied: Boulby (UK), Canfranc (Spain), Fr\'ejus (France/Italy), Pyh\"asalmi (Finland), Polkowice-Sieroszowice (Poland), Slanic (Romania) and Umbria (Italy). The design study aims at the comprehensive and coordinated technical assessment of each site, at a coherent cost estimation, and at a prioritization of the sites within the summer 2010.Comment: 5 pages, contribution to the Workshop "European Strategy for Future Neutrino Physics", CERN, Oct. 200