382 research outputs found
13-month climatology of the aerosol hygroscopicity at the free tropospheric site Jungfraujoch (3580 m a.s.l.)
A hygroscopicity tandem differential mobility analyzer (HTDMA) was operated at the high-alpine site Jungfraujoch in order to characterize the hygroscopic diameter growth factors of the free tropospheric Aitken and accumulation mode aerosol. More than ~5000 h of valid data were collected for the dry diameters <i>D</i><sub>0</sub> = 35, 50, 75, 110, 165, and 265 nm during the 13-month measurement period from 1 May 2008 through 31 May 2009. No distinct seasonal variability of the hygroscopic properties was observed. Annual mean hygroscopic diameter growth factors (<i>D</i>/<i>D</i><sub>0</sub>) at 90% relative humidity were found to be 1.34, 1.43, and 1.46 for <i>D</i><sub>0</sub> = 50, 110, and 265 nm, respectively. This size dependence can largely be attributed to the Kelvin effect because corresponding values of the hygroscopicity parameter κ are nearly independent of size. The mean hygroscopicity of the Aitken and accumulation mode aerosol at the free tropospheric site Jungfraujoch was found to be &kappa;≈0.24 with little variability throughout the year. <br><br> The impact of Saharan dust events, a frequent phenomenon at the Jungfraujoch, on aerosol hygroscopicity was shown to be negligible for <i>D</i><sub>0</sub><265 nm. Thermally driven injections of planetary boundary layer (PBL) air, particularly observed in the early afternoon of summer days with convective anticyclonic weather conditions, lead to a decrease of aerosol hygroscopicity. However, the effect of PBL influence is not seen in the annual mean hygroscopicity data because the effect is small and those conditions (weather class, season and time of day) with PBL influence are relatively rare. <br><br> Aerosol hygroscopicity was found to be virtually independent of synoptic wind direction during advective weather situations, i.e. when horizontal motion of the atmosphere dominates over thermally driven convection. This indicates that the hygroscopic behavior of the aerosol observed at the Jungfraujoch can be considered representative of the lower free troposphere on at least a regional if not continental scale
Differential effects on inhibition of cholesterol absorption by plant stanol and plant sterol esters in apoE−/− mice
Aims
'Functional foods'; supplemented with plant sterol esters (PSE) and plant stanol esters (PSA) are therapeutic options for the management of hypercholesterolaemia. However, their effects on blood monocytes, endothelial function, atherogenesis, and sterol tissue concentrations are poorly understood.
Methods and results
Male apoE−/− mice (n= 30) were randomized to three different diets for 6 weeks (n= 10 per group): high-cholesterol (1.25%) western-type diet (WTD), WTD + 2% PSE, and WTD + 2% PSA. Both supplements reduced serum cholesterol. WTD + PSE resulted in increased plant sterol serum concentrations and increased inflammatory Ly-6C(high) monocyte numbers. WTD + PSA increased plant stanol serum concentrations and Ly-6C-monocyte numbers, but decreased vascular superoxide release, lipid hydroperoxides, and inflammatory cytokines in aortic tissue, in plasma, and in circulating monocytes. Despite reduced serum cholesterol concentrations, both supplements impaired endothelial vasodilation compared with WTD. WTD + PSA reduced the development of atherosclerotic lesions compared with WTD alone (12.7 ± 3.7 vs. 28.3 ± 3.5%), and WTD + PSE was less effective (17.5 ± 3.7%). WTD + PSE and WTD + PSA reduced the cholesterol content in the liver, but not in the brain. However, WTD + PSE and WTD + PSA increased plant sterol and plant stanol concentrations in the liver as well as in the brain.
Conclusion
PSE and PSA supplementation reduced serum cholesterol, but increased plant sterol and plant stanol concentrations. Elevated levels of PSE and PSA were associated with endothelial dysfunction and increased central nervous system depositions. Atherosclerotic lesion retardation was more pronounced in WTD + PSA, coinciding with higher regenerative monocyte numbers, decreased oxidative stress, and decreased inflammatory cytokines compared with WTD + PSE
Retrospective analysis of a nonforecasted rain-on-snow flood in the Alps – a matter of model limitations or unpredictable nature?
A rain-on-snow flood occurred in the Bernese Alps, Switzerland, on 10 October
2011, and caused significant damage. As the flood peak was unpredicted by the
flood forecast system, questions were raised concerning the causes and the
predictability of the event. Here, we aimed to reconstruct the anatomy of
this rain-on-snow flood in the Lötschen Valley (160 km<sup>2</sup>) by
analyzing meteorological data from the synoptic to the local scale and by
reproducing the flood peak with the hydrological model WaSiM-ETH (Water Flow
and Balance Simulation Model). This in order to gain process understanding
and to evaluate the predictability.
<br><br>
The atmospheric drivers of this rain-on-snow flood were (i) sustained
snowfall followed by (ii) the passage of an atmospheric river bringing warm
and moist air towards the Alps. As a result, intensive rainfall (average of
100 mm day<sup>-1</sup>) was accompanied by a temperature increase that
shifted the 0° line from 1500 to 3200 m a.s.l. (meters above
sea level) in 24 h with a maximum increase of 9 K in
9 h. The south-facing slope of the valley received significantly more
precipitation than the north-facing slope, leading to flooding only in
tributaries along the south-facing slope. We hypothesized that the reason for
this very local rainfall distribution was a cavity circulation combined with
a seeder-feeder-cloud system enhancing local rainfall and snowmelt along the
south-facing slope.
<br><br>
By applying and considerably recalibrating the standard hydrological model
setup, we proved that both latent and sensible heat fluxes were needed to
reconstruct the snow cover dynamic, and that locally high-precipitation sums
(160 mm in 12 h) were required to produce the estimated flood
peak. However, to reproduce the rapid runoff responses during the event, we
conceptually represent likely lateral flow dynamics within the snow cover
causing the model to react "oversensitively" to meltwater.
<br><br>
Driving the optimized model with COSMO (Consortium for Small-scale
Modeling)-2 forecast data, we still failed to simulate the flood because
COSMO-2 forecast data underestimated both the local precipitation peak and
the temperature increase. Thus we conclude that this rain-on-snow flood was,
in general, predictable, but requires a special hydrological model setup and
extensive and locally precise meteorological input data. Although, this data
quality may not be achieved with forecast data, an additional model with a
specific rain-on-snow configuration can provide useful information when
rain-on-snow events are likely to occur
Measured and predicted aerosol light scattering enhancement factors at the high alpine site Jungfraujoch
Ambient relative humidity (RH) determines the water content of atmospheric aerosol particles and thus has an important influence on the amount of visible light scattered by particles. The RH dependence of the particle light scattering coefficient (&sigma;<sub>sp</sub>) is therefore an important variable for climate forcing calculations. We used a humidification system for a nephelometer which allows for the measurement of &sigma;<sub>sp</sub> at a defined RH in the range of 20–95%. In this paper we present measurements of light scattering enhancement factors <i>f</i>(RH)=&sigma;<sub>sp</sub>(RH)/&sigma;<sub>sp</sub>(dry) from a 1-month campaign (May 2008) at the high alpine site Jungfraujoch (3580 m a.s.l.), Switzerland. Measurements at the Jungfraujoch are representative for the lower free troposphere above Central Europe. For this aerosol type hardly any information about the <i>f</i>(RH) is available so far. At this site, <i>f</i>(RH=85%) varied between 1.2 and 3.3. Measured <i>f</i>(RH) agreed well with <i>f</i>(RH) calculated with Mie theory using measurements of the size distribution, chemical composition and hygroscopic diameter growth factors as input. Good <i>f</i>(RH) predictions at RH&lt;85% were also obtained with a simplified model, which uses the Ångström exponent of &sigma;<sub>sp</sub>(dry) as input. RH influences further intensive optical aerosol properties. The backscatter fraction decreased by about 30% from 0.128 to 0.089, and the single scattering albedo increased on average by 0.05 at 85% RH compared to dry conditions. These changes in &sigma;<sub>sp</sub>, backscatter fraction and single scattering albedo have a distinct impact on the radiative forcing of the Jungfraujoch aerosol
The Ice Selective Inlet: a novel technique for exclusive extraction of pristine ice crystals in mixed-phase clouds
Climate predictions are affected by high uncertainties partially due to an insufficient knowledge of aerosol-cloud interactions. One of the poorly understood processes is formation of mixed-phase clouds (MPCs) via heterogeneous ice nucleation. Field measurements of the atmospheric ice phase in MPCs are challenging due to the presence of supercooled liquid droplets. The Ice Selective Inlet (ISI), presented in this paper, is a novel inlet designed to selectively sample pristine ice crystals in mixed-phase clouds and extract the ice residual particles contained within the crystals for physical and chemical characterisation. Using a modular setup composed of a cyclone impactor, droplet evaporation unit and pumped counterflow virtual impactor (PCVI), the ISI segregates particles based on their inertia and phase, exclusively extracting small ice particles between 5 and 20 μm in diameter. The setup also includes optical particle spectrometers for analysis of the number size distribution and shape of the sampled hydrometeors. The novelty of the ISI is a droplet evaporation unit, which separates liquid droplets and ice crystals in the airborne state, thus avoiding physical impaction of the hydrometeors and limiting potential artifacts. The design and validation of the droplet evaporation unit is based on modelling studies of droplet evaporation rates and computational fluid dynamics simulations of gas and particle flows through the unit. Prior to deployment in the field, an inter-comparison of the WELAS optical particle size spectrometers and a characterisation of the transmission efficiency of the PCVI was conducted in the laboratory. The ISI was subsequently deployed during the Cloud and Aerosol Characterisation Experiment (CLACE) 2013 – an extensive international field campaign encompassing comprehensive measurements of cloud microphysics, as well as bulk aerosol, ice residual and ice nuclei properties. The campaign provided an important opportunity for a proof of concept of the inlet design. In this work we present the setup of the ISI, including the modelling and laboratory characterisation of its components, as well as a case study demonstrating the ISI performance in the field during CLACE 2013
Acceleration of small astrophysical grains due to charge fluctuations
We discuss a novel mechanism of dust acceleration which may dominate for
particles smaller than m. The acceleration is caused by their
direct electrostatic interactions arising from fluctuations of grain charges.
The energy source for the acceleration are the irreversible plasma processes
occurring on the grain surfaces. We show that this mechanism of
charge-fluctuation-induced acceleration likely affects the rate of grain
coagulation and shattering of the population of small grains.Comment: 8 pages, 2 figures, revised version, submitted to Astrophysical
Journa
Effects of relative humidity on aerosol light scattering in the Arctic
Aerosol particles experience hygroscopic growth in the ambient atmosphere. Their optical properties – especially the aerosol light scattering – are therefore strongly dependent on the ambient relative humidity (RH). In-situ light scattering measurements of long-term observations are usually performed under dry conditions (RH&gt;30–40%). The knowledge of this RH effect is of eminent importance for climate forcing calculations or for the comparison of remote sensing with in-situ measurements. This study combines measurements and model calculations to describe the RH effect on aerosol light scattering for the first time for aerosol particles present in summer and fall in the high Arctic. For this purpose, a field campaign was carried out from July to October 2008 at the Zeppelin station in Ny-Ålesund, Svalbard. The aerosol light scattering coefficient &sigma;<sub>sp</sub>(&lambda;) was measured at three distinct wavelengths (λ=450, 550, and 700 nm) at dry and at various, predefined RH conditions between 20% and 95% with a recently developed humidified nephelometer (WetNeph) and with a second nephelometer measuring at dry conditions with an average RH&lt;10% (DryNeph). In addition, the aerosol size distribution and the aerosol absorption coefficient were measured. The scattering enhancement factor <i>f</i>(RH, &lambda;) is the key parameter to describe the RH effect on &sigma;<sub>sp</sub>(&lambda;) and is defined as the RH dependent &sigma;<sub>sp</sub>(RH, &lambda;) divided by the corresponding dry &sigma;<sub>sp</sub>(RH<sub>dry</sub>, &lambda;). During our campaign the average <i>f</i>(RH=85%, λ=550 nm) was 3.24&plusmn;0.63 (mean &plusmn; standard deviation), and no clear wavelength dependence of <i>f</i>(RH, &lambda;) was observed. This means that the ambient scattering coefficients at RH=85% were on average about three times higher than the dry measured in-situ scattering coefficients. The RH dependency of the recorded <i>f</i>(RH, &lambda;) can be well described by an empirical one-parameter equation. We used a simplified method to retrieve an apparent hygroscopic growth factor <i>g</i>(RH), defined as the aerosol particle diameter at a certain RH divided by the dry diameter, using the WetNeph, the DryNeph, the aerosol size distribution measurements and Mie theory. With this approach we found, on average, <i>g</i>(RH=85%) values to be 1.61&plusmn;0.12 (mean&plusmn;standard deviation). No clear seasonal shift of <i>f</i>(RH, &lambda;) was observed during the 3-month period, while aerosol properties (size and chemical composition) clearly changed with time. While the beginning of the campaign was mainly characterized by smaller and less hygroscopic particles, the end was dominated by larger and more hygroscopic particles. This suggests that compensating effects of hygroscopicity and size determined the temporal stability of <i>f</i>(RH, &lambda;). During sea salt influenced periods, distinct deliquescence transitions were observed. At the end we present a method on how to transfer the dry in-situ measured aerosol scattering coefficients to ambient values for the aerosol measured during summer and fall at this location
A combined particle trap/HTDMA hygroscopicity study of mixed inorganic/organic aerosol particles
International audienceAtmospheric aerosols are often mixtures of inorganic and organic material. Organics can represent a large fraction of the total aerosol mass and are comprised of water-soluble and insoluble compounds. Increasing attention was paid in the last decade to the capability of mixed inorganic/organic aerosol particles to take up water (hygroscopicity). We performed hygroscopicity measurements of internally mixed particles containing ammonium sulfate and carboxylic acids (citric, glutaric, adipic acid) in parallel with an electrodynamic balance (EDB) and a hygroscopicity tandem differential mobility analyzer (HTDMA). The organic compounds were chosen to represent three distinct physical states. During hygroscopicity cycles covering hydration and dehydration measured by the EDB and the HTDMA, pure citric acid remained always liquid, adipic acid remained always solid, while glutaric acid could be either. We show that the hygroscopicity of mixtures of the above compounds is well described by the Zdanovskii-Stokes-Robinson (ZSR) relationship as long as the two-component particle is completely liquid in the ammonium sulfate/citric acid and in the ammonium sulfate/glutaric acid cases. However, we observe significant discrepancies compared to what is expected from bulk thermodynamics when a solid component is present. We explain this in terms of a complex morphology resulting from the crystallization process leading to veins, pores, and grain boundaries which allow for water sorption in excess of bulk thermodynamic predictions caused by the inverse Kelvin effect on concave surfaces
Controversial role of plant sterol esters in the management of hypercholesterolaemia
Hypercholesterolaemia is a risk factor of cardiovascular diseases and is therefore a major target for primary and secondary prevention. Maintaining a healthy diet and lifestyle reduces cardiovascular risk. 'Functional foods'; supplemented with phytosterols are advertised for the management of hypercholesterolaemia and have become a widely used non-prescription approach to lower plasma cholesterol levels. It is estimated that in 2005 worldwide 3 billion US-dollars were spent on various functional foods that have regulator-approved health claims for the management of elevated cholesterol levels.
In September 2000, the US Food and Drug Administration (FDA) issued an interim final rule allowing a health claim for reducing the risk of coronary heart disease for foods that contain phytosterols and are low in saturated fat and cholesterol. In fact, this was only the 12th time the FDA has authorized a health claim. The National Cholesterol Education Program Expert Panel (NCEP ATP III) recommends since 2001 phytosterol enriched functional foods as part of an optimal dietetic prevention strategy in primary and secondary prevention of cardiovascular diseases. The American Heart Association (AHA) has followed and sees phytosterols 'as a therapeutic option ... for individuals with elevated cholesterol levels';. Since then other well-esteemed societies such as the Spanish Cardiology Society, the Association of Clinical and Public Health Nutritionists in Finland, and the National Heart Foundation in Australia, to name only a few, have identified phytosterols as an important additional dietary option in the management of hypercholesterolaemia. However, recently released guidelines are more critical of food supplementation with phytosterols and draw attention to significant safety issues
On the effects of organic matter and sulphur-containing compounds on the CCN activation of combustion particles
The European PartEmis project (Measurement and prediction of emissions of aerosols and gaseous precursors from gas turbine engines) was focussed on the characterisation and quantification of exhaust emissions from a gas turbine engine. The combustion aerosol characterisation included on-line measurements of mass and number concentration, size distribution, mixing state, thermal stability of internally mixed particles, hygroscopicity, cloud condensation nuclei (CCN) activation potential, and off-line analysis of chemical composition. Based on this extensive data set, the role of sulphuric acid coating and of the organic fraction of the combustion particles for the CCN activation was investigated. Modelling of CCN activation was conducted using microphysical and chemical properties obtained from the measurements as input data. Coating the combustion particles with water-soluble sulphuric acid, increases the potential CCN activation, or lowers the activation diameter, respectively. The adaptation of a Köhler model to the experimental data yielded coatings from 0.1 to 3 vol-% of water-soluble matter, which corresponds to an increase in the fraction of CCN-activated combustion particles from ≤10<sup>−4</sup> to ≌10<sup>−2</sup> at a water vapour saturation ratio S<sub>w</sub>=1.006. Additional particle coating by coagulation of combustion particles and aqueous sulphuric acid particles formed by nucleation further reduces the CCN activation diameter. In contrast, particles containing a large fraction of non-volatile organic compounds grow significantly less at high relative humidity than particles with a lower content of non-volatile OC. The resulting reduction in the potential CCN activation with an increasing fraction of non-volatile OC becomes visible as a trend in the experimental data. While a coating of water-soluble sulphuric acid increases the potential CCN activation, or lowers the activation diameter, respectively, the non-volatile organic compounds, mainly found at lower combustion temperatures, can partially compensate this sulphuric acid-related enhancement of CCN activation of carbonaceous combustion aerosol particles
- …