110 research outputs found

    Synthesis and Investigation of the Physical Properties of Lead-Free BCZT Ceramics

    Get PDF
    This work presents the structure, microstructure, and physical properties of low sintering temperature lead-free ceramics 0.52(Ba0.7Ca0.3)TiO3-0.48Ba(Zr0.2Ti0.8)O3 doped with nano-sized ZnO particles (noted as BCZT/x, x is the content of ZnO nanoparticles in wt.%, x = 0.00, 0.05, 0.10, 0.15, 0.20, and 0.25). The obtained results of Raman scattering and dielectric measurements have confirmed that Zn2+ has occupied B-site, to cause a deformation in the ABO3-type lattice of the BCZT/x specimens. The 0.15 wt.% ZnO-modified ceramic sintered at 1350°C exhibited excellent piezoelectric parameters: d33 = 420 pC/N, d31 = −174 pC/N, kp = 0.483, kt = 0.423, and k33 = 0.571. The obtained results indicate that the high-quality lead-free BCZT ceramic could be successfully synthesized at a low sintering temperature of 1350°C with an addition of appropriated amount of ZnO nanoparticles. This work also reports the influence of the sintering temperature on structure, microstructure, and piezoelectric properties of BCZT/0.15 compound. By rising sintering temperature, the piezoelectric behaviors were improved and rose up to the best parameters at a sintering temperature of 1450°C (d33 = 576 pC/N and kp = 0.55). The corresponding properties of undoped BCZT ceramics were investigated as a comparison. It also presented that the sintering behavior and piezo-parameters of doped BCZT samples are better than the undoped BCZT samples at each sintering temperature

    Recent remarkable records reveal that Phia Oac-Phia Den Nature Reserve is a priority area for bat conservation in Northern Vietnam

    Get PDF
    AbstractThree short field surveys were conducted in the Phia Oac-Phia Den Nature Reserve to assess the species diversity and endemism of local bat fauna. In combination with data from a previous study, 24 bat species of 5 families, representing > 20% of the national bat diversity, were recorded in the study area. The occurrence of several bat species restricted to montane forests, that is, Murina chrysochaetes, Pipistrellus coromandra, and a potentially new species Rhinolophus cf. macrotis, suggests that Phia Oac is an important area for bat conservation in Vietnam and thus more comprehensive studies need to be performed

    Growth of single crystals of methylammonium lead mixedhalide perovskites

    Get PDF
    We report the growth and characterization of different bulk single crystals of organo lead mixed halide perovskites CH3NH3PbI3−xBrx by two different crystal growth approaches: (i)anti-solvent diffusion, and (ii) inverse temperature crystallization. In order to control the size and the shape of crystals, we have investigated different experimental growth parameters such as temperature and precursor concentration. The morphology of obtained crystals was observed by optical microscope, whereas their intrinsic crystalline properties were characterized by single crystal as well as powder X-ray diffraction. The results illustrated that the growth and crystalline structure of mixed halide perovskites CH3NH3PbI3−xBrx could be easily tuned

    Multichannel Photon Counting Lidar Measurements Using USB-based Digital Storage Oscilloscope

    Get PDF
    We present a simple method of making multichannel photon counting measurements of weak lidar signal from large ranges, using commonly available USB-based digital storage oscilloscopes. The single photon pulses from compact photomultiplier tubes are amplified and stretched so that the pulses are large and broad enough to be sampled efficiently by the USB oscilloscopes. A software interface written in Labview is then used to count the number of photon pulses in each of the prescribed time bins to form the histogram of LIDAR signal. This method presents a flexible alternative to the modular multichannel scalers and facilitate the development of sensitive lidar systems

    Fabrication of Organolead Iodide Perovskite Solar Cells with Niobium-doped Titanium Dioxide as Compact Layer

    Get PDF
    Organometal halide perovskite materials have shown high potential as light absorbers for photovoltaic applications. In this work, perovskite planar solar cells were fabricated on corning substrates with the structure as follows: the first layer made of tantalum-doped tin oxide as transparent contact material, followed by sputtering niobium-doped titanium oxide as the compact electron transport layer; covered with perovskite CH3NH3PbI3 as the light harvester by combination between spin-coating and dipping methods; CuSCN was evaporated as the hole transport layer; the final thin Al/Ag electrodes were deposited. This configuration is shortly described as Al/TTO/NTO/CH3NH3PbI3/CuSCN/Ag. Such heterojunctions are expected to be suitable for the development of efficient hybrid solar cells. The fabricated cells were measured under the air mass 1.5 illumination condition, showed the rectification effect and exhibited a power conversion efficiency of 0.007%, with a open circuit voltage of 53.2 mV, a short circuit current of 0.36 mA/cm2, and a form factor of 37%. The power conversion efficiency will be further optimized in near future

    Optimising diagnosis and treatment of tuberculosis infection in community and primary care settings in two urban provinces of Viet Nam: a cohort study

    Get PDF
    Objectives: To end tuberculosis (TB), the vast reservoir of 1.7–2.3 billion TB infections (TBIs) must be addressed, but achieving global TB preventive therapy (TPT) targets seems unlikely. This study assessed the feasibility of using interferon-γ release assays (IGRAs) at lower healthcare levels and the comparative performance of 3-month and 9-month daily TPT regimens (3HR/9H). Design, setting, participants and intervention: This cohort study was implemented in two provinces of Viet Nam from May 2019 to September 2020. Participants included household contacts (HHCs), vulnerable community members and healthcare workers (HCWs) recruited at community-based TB screening events or HHC investigations at primary care centres, who were followed up throughout TPT. Primary and secondary outcomes: We constructed TBI care cascades describing indeterminate and positivity rates to assess feasibility, and initiation and completion rates to assess performance. We fitted mixed-effects logistic and stratified Cox models to identify factors associated with IGRA positivity and loss to follow-up (LTFU). Results: Among 5837 participants, the indeterminate rate was 0.8%, and 30.7% were IGRA positive. TPT initiation and completion rates were 63.3% (3HR=61.2% vs 9H=63.6%; p=0.147) and 80.6% (3HR=85.7% vs 9H=80.0%; p=0.522), respectively. Being male (adjusted OR=1.51; 95% CI: 1.28 to 1.78; p<0.001), aged 45–59 years (1.30; 1.05 to 1.60; p=0.018) and exhibiting TB-related abnormalities on X-ray (2.23; 1.38 to 3.61; p=0.001) were associated with positive IGRA results. Risk of IGRA positivity was lower in periurban districts (0.55; 0.36 to 0.85; p=0.007), aged <15 years (0.18; 0.13 to 0.26; p<0.001), aged 15–29 years (0.56; 0.42 to 0.75; p<0.001) and HCWs (0.34; 0.24 to 0.48; p<0.001). The 3HR regimen (adjusted HR=3.83; 1.49 to 9.84; p=0.005) and HCWs (1.38; 1.25 to 1.53; p<0.001) showed higher hazards of LTFU. Conclusion: Providing IGRAs at lower healthcare levels is feasible and along with shorter regimens may expand access and uptake towards meeting TPT targets, but scale-up may require complementary advocacy and education for beneficiaries and providers

    Validation and utilization of an internally controlled multiplex Real-time RT-PCR assay for simultaneous detection of enteroviruses and enterovirus A71 associated with hand foot and mouth disease

    Get PDF
    Background: Hand foot and mouth disease (HFMD) is a disease of public health importance across the Asia-Pacific region. The disease is caused by enteroviruses (EVs), in particular enterovirus A71 (EV-A71). In EV-A71-associated HFMD, the infection is sometimes associated with severe manifestations including neurological involvement and fatal outcome. The availability of a robust diagnostic assay to distinguish EV-A71 from other EVs is important for patient management and outbreak response. Methods: We developed and validated an internally controlled one-step single-tube real-time RT-PCR in terms of sensitivity, linearity, precision, and specificity for simultaneous detection of EVs and EV-A71. Subsequently, the assay was then applied on throat and rectal swabs sampled from 434 HFMD patients. Results: The assay was evaluated using both plasmid DNA and viral RNA and has shown to be reproducible with a maximum assay variation of 4.41 % and sensitive with a limit of detection less than 10 copies of target template per reaction, while cross-reactivity with other EV serotypes was not observed. When compared against a published VP1 nested RT-PCR using 112 diagnostic throat and rectal swabs from 112 children with a clinical diagnosis of HFMD during 2014, the multiplex assay had a higher sensitivity and 100 % concordance with sequencing results which showed EVs in 77/112 (68.8 %) and EV-A71 in 7/112 (6.3 %). When applied to clinical diagnostics for 322 children, the assay detected EVs in throat swabs of 257/322 (79.8 %) of which EV-A71 was detected in 36/322 (11.2 %) children. The detection rate increased to 93.5 % (301/322) and 13.4 % (43/322) for EVs and EV-A71, respectively, when rectal swabs from 65 throat-negative children were further analyzed. Conclusion: We have successfully developed and validated a sensitive internally controlled multiplex assay for rapid detection of EVs and EV-A71, which is useful for clinical management and outbreak control of HFMD. Keywords: Hand foot and mouth disease, Enteroviruses, Enterovirus A71, Real-time RT-PCR, Diagnosi
    • 

    corecore