Fe 3 O 4 nanoparticles for complex targeted delivery and boron neutron capture therapy

Magnetic Fe 3 O 4 nanoparticles (NPs) and their surface modification with therapeutic substances are of great interest, especially drug delivery for cancer therapy, including boron-neutron capture therapy (BNCT). In this paper, we present the results of boron-rich compound (carborane borate) attachment to previously aminated by (3-aminopropyl)-trimethoxysilane (APTMS) iron oxide NPs. Fourier transform infrared spectroscopy with Attenuated total reflectance accessory (ATR-FTIR) and energy-dispersive X-ray analysis confirmed the change of the element content of NPs after modification and formation of new bonds between Fe3O4 NPs and the attached molecules. Transmission (TEM) and scanning electron microscopy (SEM) showed Fe3O4 NPs’ average size of 18.9 nm. Phase parameters were studied by powder X-ray diffraction (XRD), and the magnetic behavior of Fe 3 O 4 NPs was elucidated by Mössbauer spectroscopy. The colloidal and chemical stability of NPs was studied using simulated body fluid (phosphate buffer-PBS). Modified NPs have shown excellent stability in PBS (pH = 7.4), characterized by XRD, Mössbauer spectroscopy, and dynamic light scattering (DLS). Biocompatibility was evaluated in-vitro using cultured mouse embryonic fibroblasts (MEFs). The results show us an increasing of IC50 from 0.110 mg/mL for Fe 3 O 4 NPs to 0.405 mg/mL for Fe 3 O 4 -Carborane NPs. The obtained data confirm the biocompatibility and stability of synthesized NPs and the potential to use them in BNCT. © 2019 by the authors. Licensee MDPI, Basel, Switzerland.Funding: This study was funded by the Ministry of Education and Science of the Republic of Kazakhstan (grant No AP05130947 “Setting the stage for boron neutron capture therapy of cancer in the Republic of Kazakhstan”) and Nazarbayev University “Social Policy Grant” (project title: “Research and development of the new Nano-Optical Sensor based on Polymer Optical Fiber for Near-Field Scanning Optical Microscopy”, PI: Kanat Dukenbayev). The authors also gratefully acknowledge the financial support of the Ministry of Education and Science of the Russian Federation in the framework of Increase Competitiveness Program of NUST «MISiS» (NoK4-2018-036, P02-2017-2-4), implemented by a governmental degree dated 16th of March 2013, No 211. The work was partially supported by Act 211 Government of the Russian Federation, contract No 02.A03.21.0011. This work was partially supported by the Ministry of Education and Science of the Russian Federation (Government task in SUSU 5.5523.2017/8.9)

Combined Effect of Microstructure, Surface Energy, and Adhesion Force on the Friction of PVA/Ferrite Spinel Nanocomposites

Nanocomposite films based on spinel ferrite (Mg0.8Zn0.2Fe1.5Al0.5O4) in a PVA matrix were obtained. An increase in the spinel concentration to 10 wt.% caused an avalanche-like rise in roughness due to the formation of nanoparticle agglomerates. The lateral mode of atomic force microscopy (AFM) allowed us to trace the agglomeration dynamics. An unexpected result was that the composite with 6 wt.% of filler had a low friction coefficient in comparison with similar composites due to the successfully combined effects of low roughness and surface energy. The friction coefficient decreased to 0.07 when the friction coefficient of pure PVA was 0.72. A specially developed method for measuring nano-objects’ surface energy using AFM made it possible to explain the anomalous nature of the change in tribological characteristics. © 2022 by the authors. Licensee MDPI, Basel, Switzerland.National University of Science and Technology, MISISAlex V. Trukhanov thanks NUST MISIS for support within the framework of the «Priority 2030»

The effect of heat treatment on the microstructure and mechanical properties of 2d nanostructured au/nife system

Nanostructured NiFe film was obtained on silicon with a thin gold sublayer via pulsed electrodeposition and annealed at a temperature from 100 to 400◦C in order to study the effect of heat treatment on the surface microstructure and mechanical properties. High-resolution atomic force microscopy made it possible to trace stepwise evolving microstructure under the influence of heat treatment. It was found that NiFe film grains undergo coalescence twice—at ~100 and ~300°C—in the process of a gradual increase in grain size. The mechanical properties of the Au/NiFe nanostructured system have been investigated by nanoindentation at two various indentation depths, 10 and 50 nm. The results showed the opposite effect of heat treatment on the mechanical properties in the near-surface layer and in the material volume. Surface homogenization in combination with oxidation activation leads to abnormal strengthening and hardening-up of the near-surface layer. At the same time, a nonlinear decrease in hardness and Young’s modulus with increasing temperature of heat treatment characterizes the internal volume of nanostructured NiFe. An explanation of this phenomenon was found in the complex effect of changing the ratio of grain volume/grain boundaries and increasing the concentration of thermally activated diffuse gold atoms from the sublayer to the NiFe film. © 2020 by the authors. Licensee MDPI, Basel, Switzerland.Funding: The work was supported by Act 211 Government of the Russian Federation, contract № 02.A03.21.0011

Morphology and microstructure evolution of gold nanostructures in the limited volume porous matrices

The modern development of nanotechnology requires the discovery of simple approaches that ensure the controlled formation of functional nanostructures with a predetermined morphology. One of the simplest approaches is the self-assembly of nanostructures. The widespread implementation of self-assembly is limited by the complexity of controlled processes in a large volume where, due to the temperature, ion concentration, and other thermodynamics factors, local changes in diffusion-limited processes may occur, leading to unexpected nanostructure growth. The easiest ways to control the diffusion-limited processes are spatial limitation and localized growth of nanostructures in a porous matrix. In this paper, we propose to apply the method of controlled self-assembly of gold nanostructures in a limited pore volume of a silicon oxide matrix with submicron pore sizes. A detailed study of achieved gold nanostructures’ morphology, microstructure, and surface composition at different formation stages is carried out to understand the peculiarities of realized nanostructures. Based on the obtained results, a mechanism for the growth of gold nanostructures in a limited volume, which can be used for the controlled formation of nanostructures with a predetermined geometry and composition, has been proposed. The results observed in the present study can be useful for the design of plasmonic-active surfaces for surface-enhanced Raman spectroscopy-based detection of ultra-low concentration of different chemical or biological analytes, where the size of the localized gold nanostructures is comparable with the spot area of the focused laser beam. © 2020 by the authors. Licensee MDPI, Basel, Switzerland.3.1.5.1Ministry of Education and Science of the Russian Federation, Minobrnauka: К-2018-036, N 211Russian Foundation for Fundamental Investigations, RFFI: 19-32-50058European Commission, ECMinistry of Science and Technology, MOSTFunding: This research was funded by H2020-MSCA-RISE2017-778308-SPINMULTIFILM Project, the scientific– technical program, ‘Technology-SG’ [project number 3.1.5.1], Ministry of Education and Science of the Russian Federation in the framework of Increase Competitiveness Program of NUST «MISiS» [№ К-2018-036], implemented by a governmental decree dated 16th of March 2013, N 211 and Russian Foundation for Fundamental Investigations [project number 19-32-50058].Acknowledgments: D.V.Y. greatly acknowledges the World Federation of Scientists National Scholarship Program. E.Yu.K., D.V.Y., V.D.B., and V.S. greatly acknowledge the European Union program Mobility Scheme for Targeted People-to-People-Contacts (MOST) for supporting research visits

Efficiency of Magnetostatic Protection Using Nanostructured Permalloy Shielding Coatings Depending on Their Microstructure

The effect of microstructure on the efficiency of shielding or shunting of the magnetic fluxby permalloy shields was investigated in the present work. For this purpose, the FeNi shieldingcoatings with different grain structures were obtained using stationary and pulsed electrodeposition.The coatings’ composition, crystal structure, surface microstructure, magnetic domain structure, andshielding efficiency were studied. It has been shown that coatings with 0.2–0.6μm grains have adisordered domain structure. Consequently, a higher value of the shielding efficiency was achieved,but the working range was too limited. The reason for this is probably the hindered movement of thedomain boundaries. Samples with nanosized grains have an ordered two-domain magnetic structurewith a permissible partial transition to a superparamagnetic state in regions with a grain size of lessthan 100 nm. The ordered magnetic structure, the small size of the domain, and the coexistenceof ferromagnetic and superparamagnetic regions, although they reduce the maximum value ofthe shielding efficiency, significantly expand the working range in the nanostructured permalloyshielding coatings. As a result, a dependence between the grain and domain structure and theefficiency of magnetostatic shielding was found

Immobilization of boron-rich compound on Fe3O4 nanoparticles: Stability and cytotoxicity

Magnetic nanoparticles based on Fe3O4 and their modifications of surface with therapeutic substances are of great interest, especially drug delivery for cancer therapy includes boron-neutron capture therapy. The results of boron-rich compound (carborane borate) attachment to previously aminated by (3-aminopropyl)-trimethoxysilane iron oxide nanoparticles are presented. Energy-dispersive X-ray analysis and Fourier transform infrared spectroscopy with attenuated total reflection (ATR) accessory confirmed change of nanoparticles elemental content after modification and formation of new bond between Fe3O4 and attached molecules. Scanning and transmission electron microscopy showed that Fe3O4 nanoparticles average size is 18.9 nm. Phase parameters were investigated by powder X-ray diffraction, Fe3O4 nanoparticles magnetic behavior was evaluated by Mössbauer spectroscopy. Chemical and colloidal stability was studied using simulated body fluid (phosphate buffer – PBS). Modified nanoparticles have excellent stability in PBS (pH = 7.4), characterized by X-ray diffraction, Mössbauer spectroscopy and dynamic light scattering. Fe3O4 biocompatibility was elucidated in-vitro using cultured mouse embryonic fibroblasts. The obtained results show the increasing of IC50 from 0.110 mg/ml for Fe3O4 to 0.405 mg/ml for Fe3O4-Carborane nanoparticles. Obtained data confirm biocompatibility and stability of synthesized nanoparticles and potential to use them in boron-neutron capture therapy

Extremely polysubstituted magnetic material based on magnetoplumbite with a hexagonal structure: Synthesis, structure, properties, prospects

Crystalline high-entropy single-phase products with a magnetoplumbite structure with grains in the µm range were obtained using solid-state sintering. The synthesis temperature was up to 1400 °C. The morphology, chemical composition, crystal structure, magnetic, and electrodynamic properties were studied and compared with pure barium hexaferrite BaFe 12 O 19 matrix. The polysubstituted high-entropy single-phase product contains five doping elements at a high concentration level. According to the EDX data, the new compound has a formula of Ba(Fe6Ga1.25In1.17Ti1.21Cr1.22Co1.15)O19. The calculated cell parameter values were a = 5.9253(5) Å, c = 23.5257(22) Å, and V = 715.32(9) Å3. The increase in the unit cell for the substituted sample was expected due to the different ionic radius of Ti/In/Ga/Cr/Co compared with Fe3+. The electrodynamicmeasurements were performed. The dielectric and magnetic permeabilities were stable in the frequency range from 2 to 12 GHz. In this frequency range, the dielectric and magnetic losses were??0.2/0.2. Due to these electrodynamic parameters, this material can be used in the design of microwave strip devices. © 2019 by the authors. Licensee MDPI, Basel, Switzerland.Funding: The work was supported by the Russian Science Foundation, project No. 18-73-10049

Isostatic Hot Pressed W–Cu Composites with Nanosized Grain Boundaries: Microstructure, Structure and Radiation Shielding Efficiency against Gamma Rays

Abstract: The W–Cu composites with nanosized grain boundaries and high effective density were fabricated using a new fast isostatic hot pressing method. A significantly faster method was proposed for the formation of W–Cu composites in comparison to the traditional ones. The influence of both the high temperature and pressure conditions on the microstructure, structure, chemical composition, and density values were observed. It has been shown that W–Cu samples have a polycrystalline well-packed microstructure. The copper performs the function of a matrix that surrounds the tungsten grains. The W–Cu composites have mixed bcc-W (sp. gr. Im 3 m) and fcc-Cu (sp. gr. Fm 3 m) phases. The W crystallite sizes vary from 107 to 175 nm depending on the sintering conditions. The optimal sintering regimes of the W–Cu composites with the highest density value of 16.37 g/cm3 were determined. Tungsten–copper composites with thicknesses of 0.06–0.27 cm have been fabricated for the radiation protection efficiency investigation against gamma rays. It has been shown that W–Cu samples have a high shielding efficiency from gamma radiation in the 0.276–1.25 MeV range of energies, which makes them excellent candidates as materials for radiation protection. © 2022 by the authorsLicensee MDPI, Basel, Switzerland.Ministry of Education and Science of the Russian Federation, Minobrnauka: 075-15-2020-926Funding: M.V.S. acknowledges financial support from the Ministry of Science and Higher Education of the Russian Federation within the framework of state support for the creation and development of World-Class Research Centers “Digital Biodesign and Personalized Healthcare” No. 075-15-2020-926

Structure, Morphology and Electrical/Magnetic Properties of Ni-Mg Nano-Ferrites from a New Perspective

Using the auto combustion flash method, Ni1−x+2 Mg+2xFe+32O4 (x = 0, 0.2, 0.6, 0.8 and 1) nano-ferrites were synthesized. All samples were thermally treated at 973 K for 3 h. The structural analysis for the synthesized samples was performed using XRD, high-resolution transmission electron microscopy (HRTEM), and FTIR. Scanning electron microscopy (SEM) was undertaken to explore the surface morphology of all the samples. The thermal stability of these samples was investigated using thermogravimetric analysis (TGA). XRD data show the presence of a single spinel phase for all the prepared samples. The intensity of the principal peak of the spinel phase decreases as Mg content increases, showing that Mg delays crystallinity. The Mg content raised the average grain size (D) from 0.084 µm to 0.1365 µm. TGA shows two stages of weight loss variation. The vibrating sample magnetometer (VSM) measurement shows that magnetic parameters, such as initial permeability (µi) and saturation magnetization (Ms), decay with rising Mg content. The permeability and magnetic anisotropy at different frequencies and temperatures were studied to show the samples’ magnetic behavior and determine the Curie temperature (TC), which depends on the internal structure. The electrical resistivity behavior shows the semi-conductivity trend of the samples. Finally, the dielectric constant increases sharply at high temperatures, explained by the increased mobility of charge carriers, and decreases with increasing frequency. © 2022 by the authors. Licensee MDPI, Basel, Switzerland.Princess Nourah Bint Abdulrahman University, PNU: PNURSP2022R28The authors express their gratitude to Princess Nourah bint Abdulrahman University Researchers Supporting Project number (PNURSP2022R28), Princess Nourah bint Abdulrahman University, Riyadh, Saudi Arabia

ДАЛЬНОДЕЙСТВУЮЩИЕ НАПРЯЖЕНИЯ В ЭПИТАКСИАЛЬНОЙ ПЛЕНКЕ, СОЗДАННЫЕ ДИСЛОКАЦИЯМИ НЕСООТВЕТСТВИЯ

The equation connecting the misfit parameter f, the number of misfit dislocation (MD) families and the distances between MDs of the same family with the edge Burgers vector components taken for different dislocation families is obtained for the first time. It is valid for various interface boundaries (hkl). To get the equation, the long range normal and shear stresses associated with MD distribution have been considered. The optimum and non−optimum stress releasing processes are discussed. The problem of threading dislocation density diminution with generation of intersecting MDs with the same Burgers vector (L−shape MDs) is also considered for (001) and (111) interfaces. It is shown that such type MDs grow the level of the long range shear stresses and can be effectively generated only at an early stage of relaxation.Для границы раздела (ГР) произвольной ориентации (hkl) впервые получено выражение, устанавливающее взаимосвязь между параметром несоответствия эпитаксиальной гетеросистемы f, числом дислокационных семейств, участвующих в процессе снятия напряжений несоответствия, линейными плотностями дислокаций несоответствия (ДН) каждого семейства, а также значениями проекций краевых компонент векторов Бюргерса ДН на ГР. Для получения выражения рассмотрены дальнодействующие поля нормальных и сдвиговых напряжений, возникающие в приповерхностном слое эпитаксиальной пленки. Сформулированы критерии оптимального и неоптимального протекания релаксационного процесса снятия напряжений несоответствия. Для ГР (001) и (111) обсуждена проблема уменьшения плотности пронизывающих дислокаций при введении пересекающихся ДН, имеющих одинаковые векторы Бюргерса (Г-образных ДН). Показано, что эффективная генерация таких ДН возможна только на начальной стадии релаксационного процесса, поскольку сопровождается увеличением уровня дальнодействующих сдвиговых напряжений