Unresonant interaction of laser beams with microdroplets

The interaction of distilled water microdroplets (volumes of 3-4μl) with pulsed laser beams emitted at 532nm is described. At 532nm the distilled water absorption is very low and the interaction of a water bead with the laser radiation is dominated by unresonant phenomena. Following the collision of the laser beam with a microdroplet in suspended/ hanging/pendant position in air, deformations and mechanical vibrations of the droplets are produced. The conditions in which the droplets lose material as a consequence of the impact with laser beams are also explored. The effects produced on the droplet were studied pulse by pulse and depend on: droplet’s content, beam wavelength, power and focusing conditions, irradiation geometry and adhesion of the bead to the capillary on which it is suspended. The laser pulses energies were varied in four steps: 0.25mJ, 0.4mJ, 0.7mJ and 1mJ. The pulse full time width was 5ns and the typical focus diameter on the droplet was 90μm; the beam had a relatively low divergence around the focus point. The microdroplets and the modification/evolution of their shapes are visualised by recordings performed at 10kframes/second. Following a microdroplet interaction with the laser beam one may also produce at a controlled moment in time nanodroplets propagating at high (probably supersonic) speeds and microdroplets propagating at slower speeds. One may also produce pendant droplets of smaller dimensions than the initial one as well as micro/nano gas bubbles in the pendant droplet’s material/volume. In a second set of experiment was recorded at high speed the behaviour of the microdroplets of Rhodamine 6G in distilled water at resonant interaction with similar laser pulses, at the same power levels. The optical phenomena considering that the microdroplets contents are Newtonian liquids which dominate the beads behaviour at interaction with the laser beams, are discussed

Detecting local synchronization in coupled chaotic systems

We introduce a technique to detect and quantify local functional dependencies between coupled chaotic systems. The method estimates the fraction of locally syncronized configurations, in a pair of signals with an arbitrary state of global syncronization. Application to a pair of interacting Rossler oscillators shows that our method is capable to quantify the number of dynamical configurations where a local prediction task is possible, also in absence of global synchronization features

Synchronization of chaotic oscillator time scales

This paper deals with the chaotic oscillator synchronization. A new approach to detect the synchronized behaviour of chaotic oscillators has been proposed. This approach is based on the analysis of different time scales in the time series generated by the coupled chaotic oscillators. It has been shown that complete synchronization, phase synchronization, lag synchronization and generalized synchronization are the particular cases of the synchronized behavior called as "time--scale synchronization". The quantitative measure of chaotic oscillator synchronous behavior has been proposed. This approach has been applied for the coupled Rossler systems.Comment: 29 pages, 11 figures, published in JETP. 100, 4 (2005) 784-79

Particles as probes for complex plasmas in front of biased surfaces

An interesting aspect in the research of complex (dusty) plasmas is the experimental study of the interaction of micro-particles with the surrounding plasma for diagnostic purposes. Local electric fields can be determined from the behaviour of particles in the plasma, e.g. particles may serve as electrostatic probes. Since in many cases of applications in plasma technology it is of great interest to describe the electric field conditions in front of floating or biased surfaces, the confinement and behaviour of test particles is studied in front of floating walls inserted into a plasma as well as in front of additionally biased surfaces. For the latter case, the behaviour of particles in front of an adaptive electrode, which allows for an efficient confinement and manipulation of the grains, has been experimentally studied in dependence on the discharge parameters and on different bias conditions of the electrode. The effect of the partially biased surface (dc, rf) on the charged micro-particles has been investigated by particle falling experiments. In addition to the experiments we also investigate the particle behaviour numerically by molecular dynamics, in combination with a fluid and particle-in-cell description of the plasma.Comment: 39 pages, 16 figures, submitted to New J. Phy

2022 Review of Data-Driven Plasma Science

Data-driven science and technology offer transformative tools and methods to science. This review article highlights the latest development and progress in the interdisciplinary field of data-driven plasma science (DDPS), i.e., plasma science whose progress is driven strongly by data and data analyses. Plasma is considered to be the most ubiquitous form of observable matter in the universe. Data associated with plasmas can, therefore, cover extremely large spatial and temporal scales, and often provide essential information for other scientific disciplines. Thanks to the latest technological developments, plasma experiments, observations, and computation now produce a large amount of data that can no longer be analyzed or interpreted manually. This trend now necessitates a highly sophisticated use of high-performance computers for data analyses, making artificial intelligence and machine learning vital components of DDPS. This article contains seven primary sections, in addition to the introduction and summary. Following an overview of fundamental data-driven science, five other sections cover widely studied topics of plasma science and technologies, i.e., basic plasma physics and laboratory experiments, magnetic confinement fusion, inertial confinement fusion and high-energy-density physics, space and astronomical plasmas, and plasma technologies for industrial and other applications. The final section before the summary discusses plasma-related databases that could significantly contribute to DDPS. Each primary section starts with a brief introduction to the topic, discusses the state-of-the-art developments in the use of data and/or data-scientific approaches, and presents the summary and outlook. Despite the recent impressive signs of progress, the DDPS is still in its infancy. This article attempts to offer a broad perspective on the development of this field and identify where further innovations are required

Stepped heating procedure for experimental SAR evaluation of ferrofluids

The aim of this paper is to present a reliable procedure for the experimental determination of the specific absorption rate (SAR) in case of superparamagnetic Fe oxide nanoparticles dispersed in liquid environments. It is based on the acquisition of consecutive steps of time-temperature dependences along of both heating and cooling processes. Linear fitting of these recorded steps provides the heating and cooling speeds at different temperatures, which finally allow the determination of the heating profile in adiabatic-like conditions over a broad temperature range. The presented methodology represents on one hand, a useful alternative tool for the experimental evaluation of the heating capability of nanoparticulate systems for magnetic hyperthermia applications and on the other hand, gives support for a more accurate modeling of bio-heat transfer phenomena