Expected and unexpected behavior of the orientational order and dynamics induced by azobenzene solutes in a nematic

We have explored the changes in the phase stability, orientational order, and dynamics of the nematic 4-cyano-4¢-n-pentylbiphenyl (5CB) doped with either the trans or the cis form of different p-azobenzene derivatives using the ESR spin-probe technique. In particular, we have studied the effects induced by each of the seven nonmesogenic 4-R-phenylazobenzenes (R = H, F, Br, CH3, CF3, On-Bu, Ot-Bu) at 1% and 7% mole fraction on the order parameter and on the shift of the nematic-isotropic transition temperature (TNI), as reported by a nitroxide spin probe, and we have tried to relate them to the solute shape and charge distribution. In all the cases the presence of the azo-derivative causes a depression of TNI, more pronounced for the cis isomers. The dependence of on the reduced temperature T*=T/TNI remains the same as that of pure 5CB in all trans-doped samples at 1% and 7% and decreases only slightly in the cis at 1%. However, we observe different and in some cases large variations (up to 25%) in for the cis at 7%, showing solute effects that go beyond the shift in TNI. Surprisingly enough, even at the highest concentration, the probe dynamics appears to be essentially independent of the nature, the configuration, and the concentration of the different solutes and very similar to that observed in the pure 5CB

Influence of film thickness and substrate roughness on the formation of laser induced periodic surface structures in poly(ethylene terephthalate) films deposited over gold substrates.

[EN]A study of the formation of Laser Induced Periodic Surface Structures (LIPSS) using near-infrared femtosecond pulsed laser irradiation on poly(ethylene terephthalate) (PET) films deposited over gold substrates has been carried out. We report the influence of the gold substrate roughness and the PET film thickness on LIPSS formation and analyze it in terms of the features of the electric field distribution obtained by computer simulations using COMSOLTM. We obtain LIPSS with periods close to the irradiation wavelength as long as the aforementioned substrate and film parameters remain below certain threshold values, in particular for polymer thicknesses below 200 nm and substrate roughness of few nm. However, experiments show the impossibility of LIPSS formation for rough substrates as well as thick films above these threshold values. In our numerical simulations, we notice the generation of Surface Plasmon Polariton (SPP) in the film-substrate interface that gives rise to a periodical field pattern on the surface of the thin film. This periodicity is broken for a certain level of substrate roughness or film thickness. Moreover, the evolution of the period of the SPP as the substrate roughness and film thickness change for given laser parameters is qualitatively in good agreement with the experimental LIPSS period (below but close to the irradiation laser wavelength). In conclusion, the experimental findings are explained by the formation and behavior of SPP in the thin film-substrate interface. On these grounds, we propose that, for our case of study, this SPP formation and the subsequent inhomogeneous rise in temperature induced by the periodic field on the surface of the sample is the leading mechanism contributing to LIPSS formatio

Anatomical basis of erector spinae plane block: a dissection and histotopographic pilot study

Purpose: Erector spinae plane (ESP) block is an interfascial blockade used in different clinical scenarios. This study investigated the ventral extent of dye diffusion in ESP block. Methods: The ultrasound-guided ESP block was bilaterally performed with an injection at the T5 vertebral level (21-Gauge, 50\ua0mm needle), using diluted black tissue marking dye (20\ua0mL; 1:4 ratio with standard saline solution) instead of local anesthetic on two fresh-frozen corpses within the body donation program of the University of Padova. Subsequently, the gross anatomical dissection was performed by a combined posterior plus anterior approach, and the histotopographic examination completed. Results: Macroscopically by gross anatomical dissection, the dye spreading ranged on the dorsal side of the chest from T2/3 to T10/11 with an extension up to 10\ua0cm laterally, and on the ventral side of the chest from T2/3\u2013T9/10. Microscopically by histotopographic examination, the dye diffused ventrally to the intercostal spaces (2\u20133 and 5\u20136 spaces on the right and left, respectively) by following the blood vessels coupled to the dorsal nerve passing through the costotransverse foramen. Conclusions: The anterior pathway of dye diffusion from the site of injection within the erector spinae muscle group during an ESP block seems to follow the blood vessels and dorsal rami of spinal nerves, suggesting the passing through the costotransverse foramen to reach the anterior paravertebral space and the intercostal nerves. These findings display an anterior histotopographic diffusion of dye resembling a paravertebral block

Thin polymer films based on poly(vinyl alcohol) containing graphene oxide and reduced graphene oxide with functional properties

10 pags., 7 figs., 2 tabs.In this article, the effect of the addition of graphene oxide (GO) and reduced graphene oxide (rGO) on the mechanical properties, thermal stability, and electrical conductivity of polyvinyl alcohol (PVA) has been investigated. Different weight percentages of nanofillers ranging from 0.5 to 5 wt% have been combined with PVA. The ultrasonic technique has been applied to disperse nanofillers in the PVA solution. The nanocomposite films have been prepared via solution casting technique and the dispersion of nanofillers into the PVA has been studied through optical microscopy. The microstructure, crystallization behavior, and interfacial interaction were characterized through X-ray diffraction and Fourier transform infrared spectroscopy. Differential scanning calorimetry (DSC) and thermogravimetric analysis have been applied to study the thermal properties of the prepared nanocomposites. The DSC results revealed that the crystallization temperature and melting temperature were enhanced in the presence of GO nanofiller. Besides, the tensile strength at break was improved along with the addition of GO; however, elongation at break for PVA/GO and PVA/rGO was diminished. Moreover, all specimens showed insulating behavior and the only sample was electrically conducting, which contain a high amount of rGO (5 wt%).Spanish Ministry of Science and Innovation, Grant/Award Number:PID2019-107514GB-I0

Monitoring prevention or emergence of HIV drug resistance: results of a population-based foundational survey of early warning indicators in mainland Tanzania

BACKGROUND: In Tanzania, routine individual-level testing for HIV drug resistance (HIVDR) using laboratory genotyping and phenotyping is not feasible due to resource constraints. To monitor the prevention or emergence of HIVDR at a population level, WHO developed generic strategies to be adapted by countries, which include a set of early warning indicators (EWIs). METHODS: To establish a baseline of EWIs, we conducted a retrospective longitudinal survey of 35 purposively sampled care and treatment clinics in 17 regions of mainland Tanzania. We extracted data relevant for four EWIs (ART prescribing practices, patients lost to follow-up 12 months after ART initiation, retention on first-line ART at 12 months, and ART clinic appointment keeping in the first 12 months) from the patient monitoring system on patients who initiated ART at each respective facility in 2010. We uploaded patient information into WHO HIVResNet excel-based tool to compute national and facility averages of the EWIs and tested for associations between various programmatic factors and EWI performance using Fisher’s Exact Test. RESULTS: All sampled facilities met the WHO EWI target (100%) for ART prescribing practices. However, the national averages for patients lost to follow-up 12 months after ART initiation, retention on first-line ART at 12 months, and ART clinic appointment keeping in the first 12 months fell short, at 26%, 54% and 38%, respectively, compared to the WHO targets ≤ 20%, ≥ 70%, and ≥ 80%. Clinics with fewer patients lost to follow-up 12 months after ART initiation and more patients retained on first-line-ART at 12 months were more likely to have their patients spend the longest time in the facility (including wait-time and time with providers), (p = 0.011 and 0.007, respectively). CONCLUSION: Tanzania performed very well in EWI 1a, ART prescribing practices. However, its performance in other three EWIs was far below the WHO targets. This study provides a baseline for future monitoring of EWIs in Tanzania and highlights areas for improvement in the management of ART patients in order not only to prevent emergence of HIVDR due to programmatic factors, but also to improve the quality of life for ART patients

A separation of electrons and protons in the GAMMA-400 gamma-ray telescope

The GAMMA-400 gamma-ray telescope is intended to measure the fluxes of gamma rays and cosmic-ray electrons and positrons in the energy range from 100 MeV to several TeV. Such measurements concern with the following scientific goals: search for signatures of dark matter, investigation of gamma-ray point and extended sources, studies of the energy spectra of Galactic and extragalactic diffuse emission, studies of gamma-ray bursts and gamma-ray emission from the active Sun, as well as high-precision measurements of spectra of high-energy electrons and positrons, protons, and nuclei up to the knee. The main components of cosmic rays are protons and helium nuclei, whereas the part of lepton component in the total flux is ~10E-3 for high energies. In present paper, the capability of the GAMMA-400 gamma-ray telescope to distinguish electrons and positrons from protons in cosmic rays is investigated. The individual contribution to the proton rejection is studied for each detector system of the GAMMA-400 gamma-ray telescope. Using combined information from all detector systems allow us to provide the proton rejection from electrons with a factor of ~4x10E5 for vertical incident particles and ~3x10E5 for particles with initial inclination of 30 degrees. The calculations were performed for the electron energy range from 50 GeV to 1 TeV.Comment: 19 pages, 10 figures, submitted to Advances and Space Researc

Personalized bone reconstruction and regeneration in the treatment of craniosynostosis

Craniosynostosis (CS) is the second most prevalent craniofacial congenital malformation due to the premature fusion of skull sutures. CS care requires surgical treatment of variable complexity, aimed at resolving functional and cosmetic defects resulting from the skull growth constrain. Despite significant innovation in the management of CS, morbidity and mortality still exist. Residual cranial defects represent a potential complication and needdedicated management to drive a targeted bone regeneration while modulating suture ossification. To this aim, existing techniques are rapidly evolving and include the implementation of novel biomaterials, 3D printing and additive manufacturing techniques, and advanced therapies based on tissue engineering. This review aims at providing an exhaustive and up\u2010to\u2010date overview of the strategies in use to correct these congenital defects, focusing on the technological advances in the fields of biomaterials and tissue engineering implemented in pediatric surgical skull reconstruction, i.e., biodegradable bone fixation systems, biomimetic scaffolds, drug delivery systems, and cell\u2010based approaches