Remote sensing as an aid to route evaluation for relocated Louisiana Highway 1

Aerial photography in the form of color infrared and color positive transparencies was used as an aid for evaluation of the route proposed for relocated Louisiana Highway 1, between LaRose and Golden Meadows, in South Louisiana

Remote sensing as an aid to route evaluation for relocated Louisiana Highway 1

NASA aerial photography in the form of color infrared and color positive transparencies is used as an aid for evaluation of the route proposed for relocated Louisiana Highway 1, between LaRose and Golden Meadow, in South Louisiana

Design, fabrication, and operation of capsules for the irradiation testing of candidate advanced space reactor fuel pins

Fuel irradiation experiments were designed, built, and operated to test uranium mononitride (UN) fuel clad in tungsten-lined T-111 and uranium dioxide fuel clad in both tungsten-lined T-111 and tungsten-lined Nb-1% Zr. A total of nine fuel pins was irradiated at average cladding temperatures ranging from 931 to 1015 C. The UN experiments, capsules UN-4 and -5, operated for 10,480 and 10,037 hr, respectively, at an average linear heat generation rate of 10 kW/ft. The UO2 experiment, capsule UN-6, operated for 8333 hr at an average linear heat generation rate of approximately 5 kW/ft. Following irradiation, the nine fuel pins were removed from their capsules, externally examined, and sent to the NASA Plum Brook Facility for more detailed postirradiation examination. During visual examination, it was discovered that the cladding of the fuel pin containing dense UN in each of capsules UN-4 and -5 had failed, exposing the UN fuel to the NaK in which the pins were submerged and permitting the release of fission gas from the failed pins. A rough analysis of the fission gas seen in samples of the gas in the fuel pin region indicated fission gas release-to-birth rates from these fuel pins in the range of .00001

Training and assessment of experimental competencies from a distance: Optical spectrometry via the Internet

Assessment of experimental competencies is not yet well established. We just began an empirical pilot study, too. This study aims to examine if secondary school students may successfully use a predefined remote lab activity to introduce themselves to atomic physics. The analysis of spectra is a fundamental component for the understanding of wave optics and color perception. Hence, every student should have the opportunity to conduct own optical emission experiments. Since spectrometers are expensive and an accurate calibration is necessary to achieve energy distribution spectra of high quality, we developed a remotely controlled laboratory. We evaluated the experimental set-up and the accompanying worksheet with groups of two to four students in a laboratory condition. Additionally, the emerged learning material was brought to school and tested as a homework activity with 9th-graders replacing the regular introduction to atomic physics. The results show that the experiment presented here can be used by ninth grade students and is useful in connection with the created material for the self-regulated introduction to atomic physics in the context of homework

180nm metal gate, high-k dielectric, implant-free III--V MOSFETs with transconductance of over 425 μS/μm

Abstract: Data is reported from 180 nm gate length GaAs n-MOSFETs with drive current (Ids,sat) of 386 μA/μm (Vg=Vd =1.5 V), extrinsic transconductance (gm) of 426 μS/μm, gate leakage ( jg,limit) of 44 nA/cm2, and on resistance (Ron) of 1640 Ω μm. The gm and Ron metrics are the best values reported to date for III-V MOSFETs, and indicate their potential for scaling to deca-nanometre dimensions

Image size influences visual search and perception of hemorrhages when reading cranial CT: an eye tracking study

Objectives: To explore reader gaze, performance and preference during interpretation of cranial computed tomography (cCT) in stack mode at two different sizes. Background: Digital display of medical images allows for the manipulation of many imaging factors, like image size, by the radiologists, yet it is often not known what display parameters better suit human perception. Materials and Methods: Twenty-one radiologists provided informed consent to be eye tracked while reading 20 cCT cases. Half of these cases were presented at a size of 14x14 cm (512x512 pixels), half at 28x28 cm (1024x1024 pixels). Visual search, performance and preference for the two image sizes were assessed. Results: When reading small images significantly fewer, but longer fixations were observed, and these covered significantly more slices. Time to first fixation of True Positive findings was faster in small images, but dwell time on true findings was longer. Readers made more False Positive decisions in small images, but no overall difference in either JAFROC or reading time was found. Conclusions: Overall performance is not affected by image size. However, small stack mode cCT images may better support the use of motion perception and acquiring an overview, whereas large stack mode cCT images seem better suited for detailed analyses. Application: Subjective and eye tracking data suggest that image size influences how images are searched and that different search strategies might be beneficial under different circumstances

Ueber das Calameon des Calmusöles

n/

Sub-micron, Metal Gate, High-к Dielectric, Implant-free, Enhancement-mode III-V MOSFETs

The performance of 300nm, 500nm and 1μm metal gate, implant free, enhancement mode III-V MOSFETs are reported. Devices are realised using a 10nm MBE grown Ga2O3/(GaxGd1-x)2O3 high-κ (κ=20) dielectric stack grown upon a δ-doped AlGaAs/InGaAs/AlGaAs/GaAs heterostructure. Enhancement mode operation is maintained across the three reported gate lengths with a reduction in threshold voltage from 0.26 V to 0.08 V as the gate dimension is reduced from 1 μm to 300 nm. An increase in transconductance is also observed with reduced gate dimension. Maximum drain current of 420 μA/μm and extrinsic transconductance of 400 µS/µm are obtained from these devices. Gate leakage current of less than 100pA and subthreshold slope of 90 mV/decade were obtained for all gate lengths. These are believed to be the highest performance submicron enhancement mode III-V MOSFETs reported to date

Evidence for an RNA-based catalytic mechanism in eukaryotic nuclear ribonuclease P.

This is the published version. Copyright 2000 by the RNA Society.Ribonuclease P is the enzyme responsible for removing the 5'-leader segment of precursor transfer RNAs in all organisms. All eukaryotic nuclear RNase Ps are ribonucleoproteins in which multiple protein components and a single RNA species are required for activity in vitro as well as in vivo. It is not known, however, which subunits participate directly in phosphodiester-bond hydrolysis. The RNA subunit of nuclear RNase P is evolutionarily related to its catalytically active bacterial counterpart, prompting speculation that in eukaryotes the RNA may be the catalytic component. In the bacterial RNase P reaction, Mg(II) is required to coordinate the nonbridging phosphodiester oxygen(s) of the scissile bond. As a consequence, bacterial RNase P cannot cleave pre-tRNA in which the pro-Rp nonbridging oxygen of the scissile bond is replaced by sulfur. In contrast, the RNase P reaction in plant chloroplasts is catalyzed by a protein enzyme whose mechanism does not involve Mg(II) coordinated by the pro-Rp oxygen. To determine whether the mechanism of nuclear RNase P resembles more closely an RNA- or a protein-catalyzed reaction, we analyzed the ability of Saccharomyces cerevisiae nuclear RNase P to cleave pre-tRNA containing a sulfur substitution of the pro-Rp oxygen at the cleavage site. Sulfur substitution at this position prohibits correct cleavage of pre-tRNA. Cleavage by eukaryotic RNase P thus depends on the presence of a thio-sensitive ligand to the pro-Rp oxygen of the scissile bond, and is consistent with a common, RNA-based mechanism for the bacterial and eukaryal enzymes

Surface Structure and Surface Kinetics of InN Grown by Plasma-Assisted Atomic Layer Epitaxy: A HREELS Study

The surface bonding configuration and kinetics of hydrogen desorption from InN grown by plasma-assisted atomic layer epitaxy have been investigated. High resolution electron energy loss spectra exhibited loss peaks assigned to a Fuchs–Kliewer surface phonon, N-N and N-H surface species. The surface N-N vibrations are attributed to surface defects. The observation of N-H but no In-Hsurface species suggested N-terminated InN. Isothermal desorption data were best fit by the first-order desorption kinetics with an activation energy of (0.88 ± 0.06) eV and pre-exponential factor of (1.5 ± 0.5) × 105 s−1