94,405 research outputs found
Inter-Regional Transfer Trade Flows in the English Football League
This paper examines the pattern and extent of inter-regional transfers of professional footballers between clubs in the English football league system over the period 1990-1991 to 1999-2000. Our study emlploys a variant form of an established trade flow model and, in presenting and confirming tbe pattern and extent of inter-regional transfers, it indicates the wider applications of the conventional trade model.
Children\u27s Memory for Conversations About Sexual Abuse: Legal and Psychological Implications
Development of eye-safe lidar for aerosol measurements
Research is summarized on the development of an eye safe Raman conversion system to carry out lidar measurements of aerosol and clouds from an airborne platform. Radiation is produced at the first Stokes wavelength of 1.54 micron in the eye safe infrared, when methane is used as the Raman-active medium, the pump source being a Nd:YAG laser at 1.064 micron. Results are presented for an experimental study of the dependence of the 1.54 micron first Stokes radiation on the focusing geometry, methane gas pressure, and pump energy. The specific new technique developed for optimizing the first Stokes generation involves retroreflecting the backward-generated first Stokes light back into the Raman cell as a seed Stokes beam which is then amplified in the temporal tail of the pump beam. Almost 20 percent conversion to 1.54 micron is obtained. Complete, assembled hardware for the Raman conversion system was delivered to the Goddard Space Flight Center for a successful GLOBE flight (1989) to measure aerosol backscatter around the Pacific basin
Progress of research on water vapor lidar
Research is summarized on applications of stimulated Raman scattering (SRS) of laser light into near infrared wavelengths suitable for atmospheric monitoring. Issues addressed are conversion efficiency, spectral purity, optimization of operating conditions, and amplification techniques. A Raman cell was developed and built for the laboratory program, and is now available to NASA-Langley, either as a design or as a completed cell for laboratory or flight applications. The Raman cell has been approved for flight in NASA's DC-8 aircraft. The self-seeding SRS technique developed here is suggested as an essential improvement for tunable near-IR DIAL applications at wavelengths of order 1 micrometer or greater
Wear and Friction Modeling on Lifeboat Launch Systems
The RNLI provides search and rescue cover along the UK and RoI coast using a variety of lifeboats
and launch techniques. In locations where there is no natural harbour it is necessary to use a slipway
to launch the lifeboat into the sea. Lifeboat slipway stations consist of an initial section where the
boat is held on rollers followed by an inclined keelway lined with low friction composite materials,
the lifeboat is released from the top of the slipway and proceeds under its own weight into the water.
The lifeboat is later recovered using a winch line. It is common to manually apply grease to the
composite slipway lining before each launch and recovery in order to ensure sufficiently low friction
for successful operation. With the introduction of the Tamar class lifeboat it is necessary to upgrade
existing boathouses and standardise slipway operational procedures to ensure consistent operation.
The higher contact pressures associated with the new lifeboat have led to issues of high friction and
wear on the composite slipway linings and the manual application of grease to reduce friction is to be
restricted due to environmental impact and cost factors. This paper presents a multidisciplinary
approach to modelling slipway panel wear and friction using tribometer testing in conjunction with
finite element analysis and slipway condition surveys to incorporate common real-world effects such
as panel misalignments. Finally, it is shown that a freshwater lubrication system is effective,
reducing cost and environmental impacts while maintaining good friction and wear performance
Momentum transfer dependence of the proton's electric and magnetic polarizabilities
The Q^2-dependence of the sum of the electric and magnetic polarizabilities
of the proton is calculated over the range 0 \leq Q^2 \leq 6 GeV^2 using the
generalized Baldin sum rule. Employing a parametrization of the F_1 structure
function valid down to Q^2 = 0.06 GeV^2, the polarizabilities at the real
photon point are found by extrapolating the results of finite Q^2 to Q^2 = 0
GeV^2. We determine the evolution over four-momentum transfer to be consistent
with the Baldin sum rule using photoproduction data, obtaining \alpha + \beta =
13.7 \pm 0.7 \times 10^{-4}\, \text{fm}^3.Comment: 4 pages, 3 figure
Isoprene Emission and Carbon Dioxide Protect Aspen Leaves from Heat Stress
High temperature, especially above 35oC, is known to reduce leaf photosynthetic rate in many tree species. This study investigated the effect of high temperature on isoprene-emitting (aspen) and non- emitting (birch) trees under ambient and elevated CO2 under open field conditions. Aspen trees tolerate heat better than birch trees and elevated CO2 protects both species against moderate heat stress. The increased thermotolerance in aspen trees compared to the birch trees may result from the aspen's ability to produce isoprene. Elevated CO2 increased carboxylation capacity, photosynthetic electron transport capacity and triose phosphate use in both birch and aspen trees. High temperature decreased all of these parameters in birch regardless of CO2 treatment but only photosynthetic electron transport and triose phosphate use at ambient CO2 were reduced in aspen. As temperature rises, non-isoprene-emitting trees will be at a disadvantage and biological diversity and species richness might be lost in some ecosystems. Our results indicate that isoprene emitting tree species will have an advantage over non-isoprene emitting ones under high temperatures
Post Big Bang Processing of the Primordial Elements
We explore the Gnedin-Ostriker suggestion that a post-Big-Bang
photodissociation process may modify the primordial abundances of the light
elements. We consider several specific models and discuss the general features
that are necessary (but not necessarily sufficient) to make the model work. We
find that with any significant processing, the final D and He abundances,
which are independent of their initial standard big bang nucleosynthesis (SBBN)
values, rise quickly to a level several orders of magnitude above the
observationally inferred primordial values. Solutions for specific models show
that the only initial abundances that can be photoprocessed into agreement with
observations are those that undergo virtually no processing and are already in
agreement with observation. Thus it is unlikely that this model can work for
any non-trivial case unless an artificial density and/or photon distribution is
invoked.Comment: 12 page Latex file (AASTEX style). Tarred, gzipped, and uuencoded
postscript files of seven figures. Also available (with ps file of paper) at
ftp://www-physics.mps.ohio-state.edu/pub/nucex/phot
- …