Ecpoc: an evolutionary computation-based proof of criteria consensus protocol

Recently, blockchain technology has been applied in many domains in our life. Blockchain networks typically utilize a consensus protocol to achieve consistency among network nodes in a decentralized environment. Delegated Proof of Stake (DPoS) is a popular mechanism adopted in many networks such as BitShares, EOS, and Cardano because of its speed and scalability advantages. However, votes that come from nodes on a DPoS network tend to support a set of specific nodes that have a greater chance of becoming block producers after voting rounds. Therefore, only a small group of nodes can be selected to become block producers. To address this issue, we propose a new protocol called Evolutionary Computation-based Proof of Criteria (ECPoC), which uses ten criteria to evaluate and select a new block procedure in each round. Next, a set of optimal weights used for maximizing the network’s decentralization level is identified through the use of evolutionary computation algorithms. The experimental results show that our consensus significantly enhances the degree of decentralization in the selection process of witness nodes compared to DPoS. As a result, ECPoC facilitates fairness between nodes and creates momentum for blockchain network developmen

The effect of polyamine 70000 (BT70) on the zinc plating process in the non-cyanide alkaline plating bath

The effect of polyamine having molecular weight 70,000u (BT70) in the non-cyanide alkaline plating bath on the morphological zinc electrodeposited coating was investigated. The obtained results from the reflectance of electrodeposited zinc coating by a suitable range of electro-current density and SEM images showed that BT70 had effect on the zinc plating in comparison with the zinc deposits from plating bath without BT70. The electrodeposited coating surface was rough and poor adhesion. However, adding BT70 into the plating bath led to the surface roughness of electrodeposited coating and grand size being reduced. Zinc electrodeposited coating from a plating bath containing BT70 at 0.5 g/L, respectively, experienced the highest reflectance, equal 46 % of the electrodeposited coating from the bath containing commercial additives. Hull method showed that the zinc deposited coating surface became smoother with the presence of polyamine in non-cyanide alkaline zinc plating solution. The zinc deposited coating had a semi-gloss scope at 10 A/dm2. If the BT70 content increased, the semi-gloss scop and the gloss of samples’ surfaces also grew up. Keywords. Polyamine, additive, non-cyanide alkaline zinc plating, zinc coating

Lung Volume Reduction Surgery in Patients with Heterogenous Emphysema: Selecting Perspective

BACKGROUND: Lung volume reduction surgery (LVRS) was introduced to alleviate clinical conditions in selected patients with heterogenous emphysema. Clarifying the most suitable patients for LVRS remained unclear. AIM: This study was undertaken to specifically analyze the preoperative factor affecting to LVRS. METHODS: The prospective study was conducted at 103 Military Hospital between July 2014 and April 2016. Severe heterogenous emphysema patients were selected to participate in the study. The information, spirometry, and body plethysmographic pulmonary function tests in 31 patients who underwent LVRS were compared with postoperative outcomes (changing in FEV1 and CAT scale). RESULTS: Of the 31 patients, there was statistically significant difference in the outcome of functional capacity, lung function between two groups (FEV1 ≤ 50% and > 50%) (∆FEV1: 22.46 vs 18.32%; p = 0.042. ∆CAT: 6.85 vs 5.07; p = 0.048). Changes of the FEV1 and CAT scale were no statistically significant differences in three groups residual volume. Patients with total lung capacity < 140% had more improved than others (∆FEV1: 23.81 vs 15.1%; p = 0.031). CONCLUSION: Preoperative spirometry and body plethysmographic pulmonary function tests were useful measures to selected severe heterogenous emphysema patients for LVRS. Patients with FEV1 ≤ 50%, TLC in the range of 100-140% should be selected

Building a nomogram to predict maximum temperature in mass concrete at an early age

During the construction of massive concrete structures, the main factor that affects the structure is temperature. The resulting temperature is the result of hydration of the cement and some other factors, which leads to the formation of thermal cracks at an early age. So, the prediction of temperature history in massive concrete structures has been a very important problem. In this study, with the help of numerical methods, a temperature nomogram was built to quickly determine the maximum temperature in concrete structures with different parameters such as size, cement content, and the initial temperature of the concrete mixture. The obtained temperature nomogram has been compared with the results of the finite element method and the model experiment gives reliable results. It can be used to predict maximum temperature in mass concrete structures to prevent the formation of thermal cracks

The results of deep magnetotelluric sounding for studying the Nha Trang - Tanh Linh fault

The profile of deep magnetotelluric sounding (MT) from Duc Trong - Tuy Phong has been carried out in Lam Dong and Binh Thuan  provinces. The length of the Duc Trong - Tuy Phong profile is about 80 km with 15 stations and the distance between the stations measures about 5 km. Two-dimensional MT inversion was used to find a resistivity model that fits the data. The 2D resistivity model allows determining position and development formation of the Nha Trang - Tanh Linh  fault. This is the deep fault, which is showed by the boundaries of remarkable change of resistivity. In the near surface of the Earth (from ground to the depth of 6 km), the angle of inclination of this fault is about 60o; in the next part, the direction of the Nha Trang - Tanh Linh  faut is vertical. Geoelectrical section of the Nha Trang - Tanh Linh  profile shows that the resistivity of mid-crust is higher than that of lower-crust and of upper-crust

Crystal structure and Hirshfield surface analysis of 4-phenyl-3-(thio-phen-3-ylmeth-yl)-1<i>H</i>-1,2,4-triazole-5(4<i>H</i>)-thione.

In the title compound, C13H11N3S2, the phenyl ring is twisted from the 1,2,4-triazole plane by 63.35 (9)° and by 47.35 (9)° from the thio-phene plane. In the crystal, chains of mol-ecules running along the c-axis direction are formed by N-H⋯S inter-actions [graph-set motif C(4)]. The 1,2,4-triazole and phenyl rings are involved in π-π stacking inter-actions [centroid-centroid distance = 3.4553 (10) Å]. The thio-phene ring is involved in C-H⋯S and C-H⋯π inter-actions. The inter-molecular inter-actions in the crystal packing were further analysed using Hirshfield surface analysis, which indicates that the most significant contacts are H⋯H (35.8%), followed by S⋯H/H⋯S (26.7%) and C⋯H/H⋯C (18.2%)

Composted tobacco waste increases the yield and organoleptic quality of leaf mustard

Tobacco (Nicotiana tabacum) waste is produced in many countries and is phytotoxic due to the alkaloid content; in Vietnam the waste is usually burned causing air pollution. We composted tobacco waste with chicken manure in different proportions—1 t of waste ± accelerant (C1 and C2); 0.8 t of waste + 0.2 t of chicken manure ± accelerant (C3 and C4); and 0.7 t of waste + 0.3 t of chicken manure ± accelerant (C5 and C6)—for 30 d in covered heaps. Three mixtures containing the accelerant (C2, C4, and C6) reached temperatures of ∼55 °C, that 5s, hot enough to suppress disease and weeds. Composting decreased the alkaloid content from ∼6,000 to ∼200 mg kg−1, and C4 with a C/N ratio of 19:1, was used in a field trial. The compost treatments (0, 10, 15, and 20 t ha−1) were combined fertilizer with phosphorus (40 kg ha−1), nitrogen (60 kg ha−1) and potassium (90 kg ha−1) for leaf mustard (Brassica integrifolia). The yield increased from ∼17 to ∼29 t ha−1 with the amount of compost applied, and the nitrate concentration decreased concomitantly from ∼67 to ∼42 mg NO3–N kg−1 fresh weight, presumably due to ongoing composting (nitrogen drawdown). Organoleptic evaluation showed a preference for the crops grown with the compost amendments. Whether remains to be seen whether one-off compost applications >20 t ha−1 and repeated, large applications provide additional, long-term production benefits, or if the benefits may be outweighed by the accumulation of persistent, phytotoxic alkaloids

EFFECT OF SOME DISPERSING AUXILIARIES ON NANOSILICA DISPERSION INTO PASSIVE CHROME TRIVALENT SOLUTION

In this paper, the dispersion of nanosilica in conversion solution trivalent chromium using variety of dispersion aids namely: SDS, PVP, AE-7, OP-10 and epomin. The results showed that the nanosilica could disperse in conversion solution in low pH (pH = 1.5). The solution containing nanosilica was uniform, having no agglomeration with SDS, PVP and AE-7 after 7-day preparation. The results of zeta potential and size distribution illustrated that AE-7 was the most effective for nanosilica dispersion in passive solution trivalent chromium with medium size of nanosilica in C2-nanosilica solution using AE-7 equal ~ 60 nm. However, there was a much diffirence size between the size of nanosilica in passive solution and initial nanosilica. As a result, nanosilica could disperse in passive solution at low pH with AE-7 but this was not effective enough to held dispersed solution in stable state