1,257 research outputs found
Microstructural modifications in tungsten induced by high flux plasma exposure : TEM examination
We have performed microstructural characterization using transmission electron microscopy (TEM) techniques to reveal nanometric features in the sub-surface region of tungsten samples exposed to high flux, low energy deuterium plasma. TEM examination revealed formation of a dense dislocation network and dislocation tangles, overall resulting in a strong increase in the dislocation density by at least one order of magnitude as compared to the initial one. Plasma-induced dislocation microstructure vanishes beyond a depth of about 10 mu m from the top of the exposed surface where the dislocation density and its morphology becomes comparable to the reference microstructure. Interstitial edge dislocation loops with Burgers vector a(0)/2 and a(0) were regularly observed within 6 mu m of the sub-surface region of the exposed samples, but absent in the reference material. The presence of these loops points to a co-existence of nanometric D bubbles, growing by loop punching mechanism, and sub-micron deuterium flakes, resulting in the formation of surface blisters, also observed here by scanning electron microscopy
Dust remobilization in fusion plasmas under steady state conditions
The first combined experimental and theoretical studies of dust
remobilization by plasma forces are reported. The main theoretical aspects of
remobilization in fusion devices under steady state conditions are analyzed. In
particular, the dominant role of adhesive forces is highlighted and generic
remobilization conditions - direct lift-up, sliding, rolling - are formulated.
A novel experimental technique is proposed, based on controlled adhesion of
dust grains on tungsten samples combined with detailed mapping of the dust
deposition profile prior and post plasma exposure. Proof-of-principle
experiments in the TEXTOR tokamak and the EXTRAP-T2R reversed-field pinch are
presented. The versatile environment of the linear device Pilot-PSI allowed for
experiments with different magnetic field topologies and varying plasma
conditions that were complemented with camera observations.Comment: 16 pages, 11 figures, 3 table
Characterizing the recovery of a solid surface after tungsten nano-tendril formation
Recovery of a flat tungsten surface from a nano-tendril surface is attempted through three techniques; a mechanical wipe, a 1673 K annealing, and laser-induced thermal transients. Results were determined through SEM imaging and elastic recoil detection to assess the helium content in the surface. The mechanical wipe leaves a ∼0.5 μm deep layer of nano-tendrils on the surface post-wipe regardless of the initial nano-tendril layer depth. Laser-induced thermal transients only significantly impact the surface morphology at heat loads of 35.2 MJ/m2 s1/2 or above, however a fully flat or recovered surface was not achieved for 100 transients at this heat load despite reducing the helium content by a factor of ∼7. A 1673 K annealing removes all detectable levels of helium but sub-surface voids/bubbles remain intact. The surface is recovered to a nearly flat state with only some remnants of nano-tendrils re-integrating into the surface remaining.</p
The environment effect on operation of in-vessel mirrors for plasma diagnostics in fusion devices
First mirrors will be the plasma facing components of optical diagnostic
systems in ITER. Mirror surfaces will undergo modification caused by erosion
and re-deposition processes [1,2]. As a consequence, the mirror performance may
be changed and may deteriorate [3,4]. In the divertor region it may also be
obscured by deposition [5-7]. The limited access to in-vessel components of
ITER calls for testing the mirror materials in present day devices in order to
gather information on the material damage and degradation of the mirror
performance, i.e. reflectivity. A dedicated experimental programme, First
Mirror Test (FMT), has been initiated at the JET tokamak within the framework
Tritium Retention Studies (TRS).Comment: 12th International Congress on Plasma Physics, 25-29 October 2004,
Nice (France).Submitted by B. Schunke on behalf of V. Voytseny
Density measurements using coherence imaging spectroscopy based on Stark broadening
A coherence imaging camera has been set up at Pilot-PSI. The system is to be used for imaging the plasma density through the Stark effect broadening of the H(γ) line. Local density values are then obtained by the Abel inversion of the measured interferometric fringe contrast. This report will present the instrument setup and proof-of-principle demonstration. The inverted spatial electron density profiles obtained near the cascaded arc source of Pilot-PSI in discharges with axial magnetic field of B=0.4 T are compared with an independent measurement of electron density by Thomson scattering and good agreement is found.This work, supported by the European Communities under
the contract of the Association EURATOM/FOM, was
carried out within the framework of the European Fusion
Programme with financial support from NWO
Erosion yields of carbon under various plasma conditions in Pilot-PSI
Fine-grain graphite targets have been exposed to ITER divertor relevant
plasmas in Pilot-PSI to address material migration issues in fusion devices.
Optical emission spectroscopy and mass loss measurements have been employed to
quantify gross chemical erosion and net erosion yields, respectively. Effects
of the ion impact energy and target geometry on carbon erosion yields have been
studied. It is concluded that temporal evolution of gross chemical erosion is
strongly connected with changes in morphology of plasma exposed surfaces. The
net carbon erosion yield is increased when the targets are partly covered by
insulating boron-nitride rings.Comment: 14 pages, 4 figures, Contribution to the 19th International
Conference on Plasma Surface Interaction
Dissociative recombination and electron-impact de-excitation in CH photon emission under ITER divertor-relevant plasma conditions
For understanding carbon erosion and redeposition in nuclear fusion devices,
it is important to understand the transport and chemical break-up of
hydrocarbon molecules in edge plasmas, often diagnosed by emission of the CH
A^2\Delta - X^2\Pi Ger\"o band around 430 nm. The CH A-level can be excited
either by electron-impact or by dissociative recombination (D.R.) of
hydrocarbon ions. These processes were included in the 3D Monte Carlo impurity
transport code ERO. A series of methane injection experiments was performed in
the high-density, low-temperature linear plasma generator Pilot-PSI, and
simulated emission intensity profiles were benchmarked against these
experiments. It was confirmed that excitation by D.R. dominates at T_e < 1.5
eV. The results indicate that the fraction of D.R. events that lead to a CH
radical in the A-level and consequent photon emission is at least 10%.
Additionally, quenching of the excited CH radicals by electron impact
de-excitation was included in the modeling. This quenching is shown to be
significant: depending on the electron density, it reduces the effective CH
emission by a factor of 1.4 at n_e=1.3*10^20 m^-3, to 2.8 at n_e=9.3*10^20
m^-3. Its inclusion significantly improved agreement between experiment and
modeling
- …