Bond strength of different endodontic sealers to dentin: push-out test

OBJECTIVE: The aim of this in vitro study was to evaluate the bond strength of different root canal sealers to dentin. MATERIAL AND METHODS: Forty extracted single-rooted human teeth were examined and the coronal and middle thirds of the canals were prepared with a 1.50 mm post drill (FibreKor Post System, Pentron). The teeth were allocated in two experimental groups, irrigated with 2.5% NaOCl+17% EDTA or saline solution (control group) and instrumented using Race rotary files (FKG) to a size #40 at the working length. Then, the groups were divided into four subgroups and filled with Epiphany sealer (Group 1), EndoREZ (Group 2), AH26 (Group 3) and Grossman's Sealer (Group 4). After 2 weeks of storage in 100% humidity at 37ºC, all teeth were sectioned transversally into 2-mm-thick discs. Push-out tests were performed at a cross-head speed of 1 mm/min using a universal testing machine. The maximum load at failure was recorded and expressed in MPa. RESULTS: Means (±SD) in root canals irrigated with 2.5% NaOCl and 17% EDTA were: G1 (21.6±6.0), G2 (15.2±3.7), G3 (14.6±4.5) and G4 (11.7±4.1).Two-way ANOVA and Tukey's test showed the highest bond strength for the Epiphany's group (p< 0.01) when compared to the other tested sealers. Saline solution decreased the values of bond-strength (

FORMAÇÃO DOCENTE: DESAFIOS E PRÁTICAS EM TEMPOS DE ACELERAÇÃO

Presentation of the Thematic Dossier&nbsp;TEACHER TRAINING: CHALLENGES AND PRACTICES IN TIMES OF ACCELERATIONPresentación del Dossier Temático FORMACIÓN DOCENTE: RETOS Y PRÁCTICAS EN TIEMPOS DE ACELERACIÓNApresentação do Dossiê Temático&nbsp;FORMAÇÃO DOCENTE: DESAFIOS E PRÁTICAS EM TEMPOS DE ACELERAÇÃ

Bond strength of different endodontic sealers to dentin: push-out test

OBJECTIVE: The aim of this in vitro study was to evaluate the bond strength of different root canal sealers to dentin. MATERIAL AND METHODS: Forty extracted single-rooted human teeth were examined and the coronal and middle thirds of the canals were prepared with a 1.50 mm post drill (FibreKor Post System, Pentron). The teeth were allocated in two experimental groups, irrigated with 2.5% NaOCl+17% EDTA or saline solution (control group) and instrumented using Race rotary files (FKG) to a size #40 at the working length. Then, the groups were divided into four subgroups and filled with Epiphany sealer (Group 1), EndoREZ (Group 2), AH26 (Group 3) and Grossman's Sealer (Group 4). After 2 weeks of storage in 100% humidity at 37ºC, all teeth were sectioned transversally into 2-mm-thick discs. Push-out tests were performed at a cross-head speed of 1 mm/min using a universal testing machine. The maximum load at failure was recorded and expressed in MPa. RESULTS: Means (±SD) in root canals irrigated with 2.5% NaOCl and 17% EDTA were: G1 (21.6±6.0), G2 (15.2±3.7), G3 (14.6±4.5) and G4 (11.7±4.1).Two-way ANOVA and Tukey's test showed the highest bond strength for the Epiphany's group (p< 0.01) when compared to the other tested sealers. Saline solution decreased the values of bond-strength (p<0.05) for all sealers. CONCLUSION: Epiphany sealer presented higher bond strength values to dentin in both irrigating protocols, and the use of 2.5% NaOCl and 17% EDTA increased the bond strength values for all sealers

Rationale, study design, and analysis plan of the Alveolar Recruitment for ARDS Trial (ART): Study protocol for a randomized controlled trial

Background: Acute respiratory distress syndrome (ARDS) is associated with high in-hospital mortality. Alveolar recruitment followed by ventilation at optimal titrated PEEP may reduce ventilator-induced lung injury and improve oxygenation in patients with ARDS, but the effects on mortality and other clinical outcomes remain unknown. This article reports the rationale, study design, and analysis plan of the Alveolar Recruitment for ARDS Trial (ART). Methods/Design: ART is a pragmatic, multicenter, randomized (concealed), controlled trial, which aims to determine if maximum stepwise alveolar recruitment associated with PEEP titration is able to increase 28-day survival in patients with ARDS compared to conventional treatment (ARDSNet strategy). We will enroll adult patients with ARDS of less than 72 h duration. The intervention group will receive an alveolar recruitment maneuver, with stepwise increases of PEEP achieving 45 cmH(2)O and peak pressure of 60 cmH2O, followed by ventilation with optimal PEEP titrated according to the static compliance of the respiratory system. In the control group, mechanical ventilation will follow a conventional protocol (ARDSNet). In both groups, we will use controlled volume mode with low tidal volumes (4 to 6 mL/kg of predicted body weight) and targeting plateau pressure &lt;= 30 cmH2O. The primary outcome is 28-day survival, and the secondary outcomes are: length of ICU stay; length of hospital stay; pneumothorax requiring chest tube during first 7 days; barotrauma during first 7 days; mechanical ventilation-free days from days 1 to 28; ICU, in-hospital, and 6-month survival. ART is an event-guided trial planned to last until 520 events (deaths within 28 days) are observed. These events allow detection of a hazard ratio of 0.75, with 90% power and two-tailed type I error of 5%. All analysis will follow the intention-to-treat principle. Discussion: If the ART strategy with maximum recruitment and PEEP titration improves 28-day survival, this will represent a notable advance to the care of ARDS patients. Conversely, if the ART strategy is similar or inferior to the current evidence-based strategy (ARDSNet), this should also change current practice as many institutions routinely employ recruitment maneuvers and set PEEP levels according to some titration method.Hospital do Coracao (HCor) as part of the Program 'Hospitais de Excelencia a Servico do SUS (PROADI-SUS)'Brazilian Ministry of Healt

Bond strength of different endodontic sealers to dentin: push-out test

Objective: The aim of this in vitro study was to evaluate the bond strength of different root canal sealers to dentin. Material and Methods: Forty extracted single-rooted human teeth were examined and the coronal and middle thirds of the canals were prepared with a 1.50 mm post drill (FibreKor Post System, Pentron). The teeth were allocated in two experimental groups, irrigated with 2.5% NaOCl+17% EDTA or saline solution (control group) and instrumented using Race rotary files (FKG) to a size #40 at the working length. Then, the groups were divided into four subgroups and filled with Epiphany sealer (Group 1), EndoREZ (Group 2), AH26 (Group 3) and Grossman's Sealer (Group 4). After 2 weeks of storage in 100% humidity at 37 degrees C, all teeth were sectioned transversally into 2-mm-thick discs. Push-out tests were performed at a cross-head speed of 1 mm/min using a universal testing machine. The maximum load at failure was recorded and expressed in MPa. Results: Means (+/- SD) in root canals irrigated with 2.5% NaOCl and 17% EDTA were: G1 (21.6 +/- 6.0), G2 (15.2 +/- 3.7), G3 (14.6 +/- 4.5) and G4 (11.7 +/- 4.1). Two-way ANOVA and Tukey's test showed the highest bond strength for the Epiphany's group (p < 0.01) when compared to the other tested sealers. Saline solution decreased the values of bond-strength (p < 0.05) for all sealers. Conclusion: Epiphany sealer presented higher bond strength values to dentin in both irrigating protocols, and the use of 2.5% NaOCl and 17% EDTA increased the bond strength values for all sealers

Volumetric Evaluation of Voids and Gaps of Different Calcium-Silicate Based Materials Used in Furcal Perforations: A Micro-CT Study

This study aimed at evaluating volumetrically gaps and voids of calcium-silicate based materials of different generations and handling properties (BC&mdash;Endosequence BC RRM-Fast Set Condensable Putty, MTA&mdash;ProRoot MTA, and BIO&mdash;Biodentine) in simulated furcal perforations in an ex vivo setup by microcomputed tomography (Micro-CT) analysis. Thirty-six extracted human mandibular molars with sound furcation areas were selected. Standardized perforations were created in the furcation area of the pulp chamber using #4 diamond burs. The specimens were randomly assigned to three groups (BC, MTA and BIO; n = 12). Samples were then scanned (SkyScan 1172; Bruker-microCT, Kontich, Belgium), and three-dimensional (3D) images reconstructed. The relative volume of gaps (VG%) and voids (VV%) present on each material was calculated. Data were analyzed using one-way analysis of variance (ANOVA) and Tukey&rsquo;s HSD test (p &lt; 0.05). Mean VG% for BC, MTA, and BIO groups were, respectively, 0.513%, 1.128%, 1.460%, with BC presenting statistically (p &lt; 0.05) fewer gaps formation than the other groups. Mean VV% were, respectively, 0.018%, 0.037%, and 0.065%. The was no statistical difference regarding VV%. There were no gap-free and void-free samples. BC group had the lowest VG% among the groups with a significant statistical difference (p &lt; 0.05)

Effect Of Sonic And Ultrasonic Retrograde Cavity Preparation On The Integrity Of Root Apices Of Freshly Extracted Human Teeth: Scanning Electron Microscopy Analysis.

Sonic and ultrasonic root-end preparation devices permit the preparation of conservative and straight cavities. However, microfractures and marginal chipping can occur due to the vibratory action of such instruments. The purpose of this study was to evaluate the effect of retrograde preparations by using sonic and ultrasonic tips on the integrity of root-end surfaces. Eighty, human anterior teeth were grouped according to size and treated as follows: treatment 1: root-end resection (RR) and root-end cavity preparation (RP) with KIS ultrasonic retrotip; treatment 2: RR and RP with Satelec S12/90 (no diamond coating) ultrasonic retrotip; treatment 3: RR and RP with a diamond-coated retrotip attached to a sonic device (Sonics); treatment 4: RR and RP with Satelec S12/90D (diamond coated) ultrasonic retrotip. The root-end surface topographies were assayed by means of polyvinylsiloxane impressions and epoxy resin replicas. SEM pictures of each sample were taken before and after preparation, and the images were evaluated by using an image processing and analysis system. The parameters evaluated were shape quality, presence of cracks, and marginal chipping. The results showed no statistically significant differences among anatomic groups, treatments, or tooth sizes (p > 0.05). Because treatment 3 removed more dental structure than the others did, its use on small teeth is inadvisable.28646-5

In vitro antimicrobial activity of calcium hydroxide pastes and their vehicles against selected microorganisms

The aim of this study was to investigate in vitro the antimicrobial activity of calcium hydroxide in combination with several vehicles against some microorganisms commonly isolated from root canals. Antimicrobial activity was determined by the agar diffusion method. Stainless-steel cylinders were placed on each inoculated agar medium. The test medicaments and their controls were placed inside the cylinders. The zones of growth inhibition were measured and recorded after incubation for each plate and the results were analyzed statistically (ANOVA). The in vitro antimicrobial effects of the medications were ranked from strongest to weakest as follows: Ca(OH)2 + CMCP + glycerine, Ca(OH)2 + CMCP, Ca(OH)2 + glycerine, Ca(OH)2 + anesthetic, Ca(OH)2 + saline, Ca(OH)2 + H2O, Ca(OH)2 + polyethyleneglycol. The pastes with oily vehicles showed significantly larger mean zones of inhibition compared to those with aqueous or viscous vehicles. It was concluded that diffusion and antimicrobial activity of calcium hydroxide were affected by the type of vehicle used

Atividade antimicrobiana in vitro das pastas de hidróxido de cálcio e seus veículos sobre microrganismos específicos

FAPESP - FUNDAÇÃO DE AMPARO À PESQUISA DO ESTADO DE SÃO PAULOCNPQ - CONSELHO NACIONAL DE DESENVOLVIMENTO CIENTÍFICO E TECNOLÓGICOCAPES - COORDENAÇÃO DE APERFEIÇOAMENTO DE PESSOAL E NÍVEL SUPERIORThe aim of this study was to investigate in vitro the antimicrobial activity of calcium hydroxide in combination with several vehicles against some microorganisms commonly isolated from root canals. Antimicrobial activity was determined by the agar diffusion method. Stainless-steel cylinders were placed on each inoculated agar medium. The test medicaments and their controls were placed inside the cylinders. The zones of growth inhibition were measured and recorded after incubation for each plate and the results were analyzed statistically (ANOVA). The in vitro antimicrobial effects of the medications were ranked from strongest to weakest as follows: Ca(OH)2 + CMCP + glycerine, Ca(OH)2 + CMCP, Ca(OH)2 + glycerine, Ca(OH)2 + anesthetic, Ca(OH)2 + saline, Ca(OH)2 + H2O, Ca(OH)2 + polyethyleneglycol. The pastes with oily vehicles showed significantly larger mean zones of inhibition compared to those with aqueous or viscous vehicles. It was concluded that diffusion and antimicrobial activity of calcium hydroxide were affected by the type of vehicle used.The aim of this study was to investigate in vitro the antimicrobial activity of calcium hydroxide in combination with several vehicles against some microorganisms commonly isolated from root canals. Antimicrobial activity was determined by the agar diffusion method. Stainless-steel cylinders were placed on each inoculated agar medium. The test medicaments and their controls were placed inside the cylinders. The zones of growth inhibition were measured and recorded after incubation for each plate and the results were analyzed statistically (ANOVA). The in vitro antimicrobial effects of the medications were ranked from strongest to weakest as follows: Ca(OH)2 + CMCP + glycerine, Ca(OH)2 + CMCP, Ca(OH)2 + glycerine, Ca(OH)2 + anesthetic, Ca(OH)2 + saline, Ca(OH)2 + H2O, Ca(OH)2 + polyethyleneglycol. The pastes with oily vehicles showed significantly larger mean zones of inhibition compared to those with aqueous or viscous vehicles. It was concluded that diffusion and antimicrobial activity of calcium hydroxide were affected by the type of vehicle used133155161FAPESP - FUNDAÇÃO DE AMPARO À PESQUISA DO ESTADO DE SÃO PAULOCNPQ - CONSELHO NACIONAL DE DESENVOLVIMENTO CIENTÍFICO E TECNOLÓGICOCAPES - COORDENAÇÃO DE APERFEIÇOAMENTO DE PESSOAL E NÍVEL SUPERIORFAPESP - FUNDAÇÃO DE AMPARO À PESQUISA DO ESTADO DE SÃO PAULOCNPQ - CONSELHO NACIONAL DE DESENVOLVIMENTO CIENTÍFICO E TECNOLÓGICOCAPES - COORDENAÇÃO DE APERFEIÇOAMENTO DE PESSOAL E NÍVEL SUPERIOR2000/13689-7; 1996/5584-3520277/99-6O objetivo deste trabalho foi investigar in vitro a atividade antimicrobiana do hidróxido de cálcio em combinação com vários veículos contra alguns microrganismos mais frequentemente isolados dos canais radiculares. A atividade antimicrobiana foi determinada pelo método de difusão no ágar. Cilindros de aço inoxidável foram colocados sobre as placas de agar já inoculadas, dentro dos quais os medicamentos testados e seus controles foram introduzidos. As zonas de inibição do crescimento microbiano foram medidas e anotadas após o período de incubação de cada placa e os resultados foram analisados estatisticamente. A atividade antimicrobiana in vitro dos medicamentos testados, em ordem decrescente, foi: Ca(OH)2 + PMCF + glicerina, Ca(OH)2 + PMCF, Ca(OH)2 + glicerina, Ca(OH)2 + anestésico, Ca(OH)2 + salina, Ca(OH)2 + H2O, Ca(OH)2 + polietilenoglicol. Pastas com veículos oleosos produziram as maiores zonas de inibição, quando comparadas com as com veículos aquosos ou oleosos. Concluimos que a habilidade de difusão e a atividade antimicrobiana do hidróxido de cálcio estão relacionadas com os tipos de veículos utilizado