Completeness of Retention Data and Determinants of Attrition in Birth Cohorts of Very Preterm Infants: A Systematic Review

Background: Birth cohorts provided essential knowledge for clinical and public health decision-making. However, little is known about retention and determinants of attrition in these specific longitudinal studies, although characterizing predictors of attrition sets the path to mitigate its occurrence and to promote valid inferences. We systematically reviewed retention in follow-ups of birth cohorts of very preterm or very low birth weight infants and the determinants of attrition. PROSPERO registration number: CRD42017082672. Methods: Publications were identified through PubMed®, Scopus, Web of Science, and Cochrane Library databases from inception to December 2017. Studies were included when reporting at least one of the following: retention at follow-ups, reasons for attrition, or characteristics of non-participants. Quality assessment was conducted using the completeness of the report of participation features in the articles. Non-participant's characteristics were presented using descriptive statistics. Local polynomial regression was used to describe overall retention trends over years of follow-up. Results: We identified 57 eligible publications, reporting on 39 birth cohorts and describing 83 follow-up evaluations. The overall median retention was 87% (p25–p75:75.8–93.6), ranging from 14.6 to 100%. Overall, retention showed a downward trend with increasing child age. Completeness of retention report was considered “enough” in only 36.8% of publications. Considering the 33 (57.9%) publications providing information on participants and non-participants, and although no formal meta-analysis was performed, it was evident that participants lost to follow-up were more often male, had foreign-born, multiparous, and younger mothers, and with a lower socioeconomic status. Conclusion: This systematic review evidenced a lack of detailed data on retention, which may threaten the potential use of evidence derived from cohort studies of very preterm infants for clinical and public health purpose. It supports the requirement for a standardized presentation of retention features responding to current guidelines.This work was supported by RECAP-Preterm project that is funded by the European Union's Horizon 2020 research and innovation program under Grant Agreement No. 733280. This study was also funded by Foundation for Science and Technology—FCT (Portuguese Ministry of Science, Technology and Higher Education), under the Unidade de Investigação em Epidemiologia—Instituto de Saúde Pública da Universidade do Porto (EPIUnit) (info:eu-repo/grantAgreement/FCT/6817 - DCRRNI ID/UIDB/04750/2020/PT); Ana Cristina Santos holds a FCT Investigator contract info:eu-repo/grantAgreement/FCT/Investigador FCT/IF/01060/2015/CP1319/CT0001/PT

Influence of cardiorespiratory fitness and parental lifestyle on adolescents' abdominal obesity

The aims of this study were (1) to analyse the influence of cardiorespiratory fitness (CRF) and parental overweight status (POS) and socioeconomic status (SES) on abdominal obesity. This study was comprised of 779 adolescents (12-18 years). Waist-height ratio (WHtR), 20 m shuttle-run test to ascertain CRF, POS according to World Health Organization recommendations and SES of parents using level of education were analysed. Using WHtR, the prevalence of abdominal obesity was 21.3% (23.5% girls and 17.9% boys; p = 0.062). Regardless of gender, participants who belonged to the WHtR risk group had significantly (p ≤ 0.05) lower CRF scores than the WHtR non-risk group; 84.4% of girls who belonged to the WHtR risk group had one or two overweight parents (p ≤ 0.05). Boys with low CRF (OR: 6.43; CI: 3.33-12.39) were more likely to belong to the WHtR risk group compared with their lean peers. Girls with low CRF (OR: 1.78; CI: 1.14-2.78) and with at least one overweight parent (OR: 2.50; CI: 1.07-5.85) or two overweight parents (OR: 4.90; CI: 2.08-11.54) were associated with the risk of abdominal obesity. This study highlights the influence of adolescents' family on abdominal obesity, especially in girls. Further, the data suggested that low CRF was a strong predictor of risk values of abdominal obesity in adolescence

The influence of socioeconomic, biogeophysical and built environment on old-age survival in a Southern European city

Old-age survival is a good indicator of population health and regional development. We evaluated the spatial distribution of old-age survival across Porto neighbourhoods and its relation with physical (biogeophysical and built) and socioeconomic factors (deprivation). Smoothed survival rates and odds ratio (OR) were estimated using Bayesian spatial models. There were important geographical differentials in the chances of survival after 75 years of age. Socioeconomic deprivation strongly impacted old-age survival (Men: least deprived areas OR=1.31(1.05-1.63); Women OR=1.53(1.24-1.89)), explaining over 40% of the spatial variance. Walkability and biogeophysical environment were unrelated to old-age survival and also unrelated to socioeconomic deprivation, being fairly evenly distributed through the city

Control of Neural Stem Cell Survival by Electroactive Polymer Substrates

Stem cell function is regulated by intrinsic as well as microenvironmental factors, including chemical and mechanical signals. Conducting polymer-based cell culture substrates provide a powerful tool to control both chemical and physical stimuli sensed by stem cells. Here we show that polypyrrole (PPy), a commonly used conducting polymer, can be tailored to modulate survival and maintenance of rat fetal neural stem cells (NSCs). NSCs cultured on PPy substrates containing different counter ions, dodecylbenzenesulfonate (DBS), tosylate (TsO), perchlorate (ClO4) and chloride (Cl), showed a distinct correlation between PPy counter ion and cell viability. Specifically, NSC viability was high on PPy(DBS) but low on PPy containing TsO, ClO4 and Cl. On PPy(DBS), NSC proliferation and differentiation was comparable to standard NSC culture on tissue culture polystyrene. Electrical reduction of PPy(DBS) created a switch for neural stem cell viability, with widespread cell death upon polymer reduction. Coating the PPy(DBS) films with a gel layer composed of a basement membrane matrix efficiently prevented loss of cell viability upon polymer reduction. Here we have defined conditions for the biocompatibility of PPy substrates with NSC culture, critical for the development of devices based on conducting polymers interfacing with NSCs

Spread pattern of the first dengue epidemic in the city of Salvador, Brazil

<p>Abstract</p> <p>Background</p> <p>The explosive epidemics of dengue that have been occurring in various countries have stimulated investigation into new approaches to improve understanding of the problem and to develop new strategies for controlling the disease. The objective of this study was to evaluate the characteristics of diffusion of the first dengue epidemic that occurred in the city of Salvador in 1995.</p> <p>Methods</p> <p>The epidemiological charts and records of notified cases of dengue in Salvador in 1995 constituted the source of data. The cases of the disease were georeferenced according to census areas (spatial units) and epidemiological weeks (temporal unit). Kernel density estimation was used to identify the pattern of spatial diffusion using the R-Project computer software program.</p> <p>Results</p> <p>Of the 2,006 census areas in the city, 1,400 (70%) registered cases of dengue in 1995 and the spatial distribution of these records revealed that by the end of 1995 practically the entire city had been affected by the virus, with the largest concentration of cases occurring in the western region, composed of census areas with a high population density and predominantly horizontal residences compared to the eastern region of the city, where there is a predominance of vertical residential buildings.</p> <p>Conclusion</p> <p>The pattern found in this study shows the characteristics of the classic process of spreading by contagion that is common to most infectious diseases. It was possible to identify the epicenter of the epidemic from which centrifugal waves of the disease emanated. Our results suggest that, if a more agile control instrument existed that would be capable of rapidly reducing the vector population within a few days or of raising the group immunity of the population by means of a vaccine, it would theoretically be possible to adopt control actions around the epicenter of the epidemic and consequently reduce the incidence of the disease in the city. This finding emphasizes the need for further research to improve the technology available for the prevention of this disease.</p

Assessment of the Antibiofilm Performance of Chitosan-Based Surfaces in Marine Environments

18 pages, 6 figures.-- This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) licenseMarine biofouling is a natural process often associated with biofilm formation on submerged surfaces, creating a massive economic and ecological burden. Although several antifouling paints have been used to prevent biofouling, growing ecological concerns emphasize the need to develop new and environmentally friendly antifouling approaches such as bio-based coatings. Chitosan (CS) is a natural polymer that has been widely used due to its outstanding biological properties, including non-toxicity and antimicrobial activity. This work aims to produce and characterize poly (lactic acid) (PLA)-CS surfaces with CS of different molecular weight (Mw) at different concentrations for application in marine paints. Loligo opalescens pens, a waste from the fishery industry, were used as a CS source. The antimicrobial activity of the CS and CS-functionalized surfaces was assessed against Cobetia marina, a model proteobacterium for marine biofouling. Results demonstrate that CS targets the bacterial cell membrane, and PLA-CS surfaces were able to reduce the number of culturable cells up to 68% compared to control, with this activity dependent on CS Mw. The antifouling performance was corroborated by Optical Coherence Tomography since PLA-CS surfaces reduced the biofilm thickness by up to 36%, as well as the percentage and size of biofilm empty spaces. Overall, CS coatings showed to be a promising approach to reducing biofouling in marine environments mimicked in this work, contributing to the valorization of fishing waste and encouraging further research on this topic.This work was financially supported by: LA/P/0045/2020 (ALiCE), UIDB/00511/2020 and UIDP/00511/2020 (LEPABE) were funded by national funds through the FCT/MCTES (PIDDAC); project HealthyWaters (NORTE-01-0145-FEDER-000069) was supported by Norte Portugal Regional Operational Programme (NORTE 2020), under the PORTUGAL 2020 Partnership Agreement, through the European Regional Development Fund (ERDF); CVMAR + I—Industrial Innovation and Marine Biotechnology Valorization” project was funded by INTERREG V Espanha Portugal (POCTEP) (0302_CVMAR_I_1_P). The research was also supported by the SurfSAFE project funded by the European Union’s Horizon 2020 research and innovation programme under grant agreement No. 952471. L.C.G. and A.I.B. thank the Portuguese Foundation for Science and Technology (FCT) for the financial support of their work contracts through the Scientific Employment Stimulus— Individual Call (ref. CEECIND/01700/2017 and 2020.03447.CEECIND, respectively). R.T.-S. acknowledges the receipt of a junior researcher fellowship from the Project PTDC/CTM-COM/4844/2020 (NanoCAT) supported by national funds through the FCT/MCTES (PIDDAC). M.L. and M.J.R. also acknowledge FCT for their PhD grants (2022.11196.BD and SFRH/BD/140080/2018, respectively). J.A.V. and J.V. also thank Xunta de Galicia by Xunta de Galicia (Grupos de Potencial Crecimiento, IN607B 2018/2019) for the financial support. Support from the EURO-MIC COST Action (CA20130) is acknowledgePeer reviewe

Influence of gold nanoparticles on collagen fibril morphology quantified using transmission electron microscopy and image analysis

BACKGROUND: Development of implantable biosensors for disease detection is challenging because of poor biocompatibility of synthetic materials. A possible solution involves engineering interface materials that promote selfassembly and adhesion of autologous cells on sensor surfaces. Crosslinked type-I collagen is an acceptable material for developing engineered basement membranes. In this study, we used functionalized gold nanoparticles as the crosslinking agent. Functionalized nanoparticles provide sites for crosslinking collagen as well as sites to deliver signaling compounds that direct selfassembly and reduce inflammation. The goal of this study was to obtain a quantitative parameter to objectively determine the presence of crosslinks. METHODS: We analyzed TEM images of collagen fibrils by two methods: Run length analysis and topology analysis after medial axis transform. RESULTS: Run length analysis showed a significant reduction of the interfibril spaces in the presence of nanoparticles (change of 40%, P < 0.05), whereas the fibril thickness remained unchanged. In the topological network, the number of elements, number of branches and number of sides increased significantly in the presence of nanoparticles (P < 0.05). Other parameters, especially the number of loops showed only a minimal and nonsignificant change. We chose a ratiometric parameter of the number of branches normalized by the number of loops to achieve independence from gross fibril density. This parameter is lower by a factor of 2.8 in the presence of nanoparticles (P < 0.05). CONCLUSION: The numerical parameters presented herein allow not only to quantify fibril mesh complexity and crosslinking, but also to help quantitatively compare cell growth and adhesion on collagen matrices of different degree of crosslinking in further studies

The Effect of Exercise Training on Diastolic and Systolic Function After Acute Myocardial Infarction: A Randomized Study

After acute myocardial infarction (AMI), diastolic dysfunction is frequent and an important determinant of adverse outcome. However, few interventions have proven to be effective in improving diastolic function. We aimed to determine the effect of exercise training on diastolic and systolic function after AMI.One month after AMI, 188 patients were prospectively randomized (1:1) to an 8-week supervised program of endurance and resistance exercise training (n = 86; 55.9 ± 10.8 years) versus standard of care (n = 89; 55.4 ± 10.3 years). All patients were submitted to detailed echocardiography and cardiopulmonary exercise test, at baseline and immediately after the study. Diastolic function was evaluated by the determination of tissue-Doppler derived early diastolic velocities (E' velocity at the septal and lateral sides of mitral annulus) and by the E/E' (ratio between the E wave velocity from mitral inflow and the E' velocity) as recommended in the consensus document for diastolic function assessment.At the end of the study, there was no significant change in E' septal velocity or E/E' septal ratio in the exercise group. We observed a small, although nonsignificant, improvement in E' lateral (mean change 0.1 ± 2.0 cm/s; P = 0.40) and E/E' lateral ratio (mean change of -0.3 ± 2.5; P = 0.24), while patients in the control group had a nonsignificant reduction in E' lateral (mean change -0.4 ± 1.9 cm/s; P = 0.09) and an increase in E/E' lateral ratio (mean change + 0.3 ± 3.3; P = 0.34). No relevant changes occurred in other diastolic parameters. The exercise-training program also did not improve systolic function (either tissue Doppler systolic velocities or ejection fraction).Exercise capacity improved only in the exercise-training group, with an increase of 1.6 mL/kg/min in pVO2 (P = 0.001) and of 1.9 mL/kg/min in VO2 at anaerobic threshold (P < 0.001).After AMI, an 8-week endurance plus resistance exercise-training program did not significantly improve diastolic or systolic function, although it was associated with an improvement in exercise capacity parameters