Populations of Pear Thrips, \u3ci\u3eTaeniothrips Inconsequens\u3c/i\u3e (Thysanoptera: Thripidae) in Sugar Maple Stands in Vermont: 1989-2005

Development of an effective IPM strategy for pear thrips, Taeniothrips inconsequens (Uzel) (Thysanoptera: Thripidae), a pest of sugar maple, Acer saccharum Marshall, demands an understanding of their population fluctuations over time. Pear thrips populations were monitored using a standardized soil sampling method every fall from 1989 – 2005 in 14 counties of Vermont (U.S.). Data from individual sites were combined into north, central and south regions. High numbers of thrips emerged from soil sampled in 1989, 1990, 1993 and 2001, particularly in the north region (Washington, Lamoille, and Franklin counties). The central and south regions had lower pear thrips populations over all years. These results provide, for the first time, fundamental knowledge of pear thrips populations across a wide geographical area of Vermont and will assist in the design of suitable control strategies for pear thrips in the future

INTERNAL FRICTION AND YOUNG'S MODULUS MEASUREMENTS ON SiO2 AND Ta2O5 FILMS DONE WITH AN ULTRA-HIGH Q SILICON-WAFER SUSPENSION

International audienceIn order to study the internal friction of thin films a nodal suspension system called GeNS (Gentle Nodal Suspension) has been developed. The key features of this system are: i) the possibility to use substrates easily available like silicon wafers; ii) extremely low excess losses coming from the suspension system which allows to measure Q factors in excess of 2×10^8 on 3 " diameter wafers; iii) reproducibility of measurements within few percent on mechanical losses and 0.01% on resonant frequencies; iv) absence of clamping; v) the capability to operate at cryogenic temperatures. Measurements at cryogenic temperatures on SiO 2 and at room temperature only on Ta2O5 films deposited on silicon are presented

Exploration of co-sputtered Ta 2 O 5 -ZrO 2 thin films for gravitational-wave detectors

We report on the development and extensive characterization of co-sputtered tantala–zirconia (Ta2O5-ZrO2) thin films, with the goal to decrease coating Brownian noise in present and future gravitational-wave detectors. We tested a variety of sputtering processes of different energies and deposition rates, and we considered the effect of different values of cation ratio η = Zr/(Zr + Ta) and of post-deposition heat treatment temperature T a on the optical and mechanical properties of the films. Co-sputtered zirconia proved to be an efficient way to frustrate crystallization in tantala thin films, allowing for a substantial increase of the maximum annealing temperature and hence for a decrease of coating mechanical loss φ c. The lowest average coating loss was observed for an ion-beam sputtered sample with η = 0.485 ± 0.004 annealed at 800 °C, yielding φ¯c=1.8×10−4 rad. All coating samples showed cracks after annealing. Although in principle our measurements are sensitive to such defects, we found no evidence that our results were affected. The issue could be solved, at least for ion-beam sputtered coatings, by decreasing heating and cooling rates down to 7 °C h−1. While we observed as little optical absorption as in the coatings of current gravitational-wave interferometers (0.5 parts per million), further development will be needed to decrease light scattering and avoid the formation of defects upon annealing

4MOST: Project overview and information for the First Call for Proposals

We introduce the 4-metre Multi-Object Spectroscopic Telescope (4MOST), a new high-multiplex, wide-field spectroscopic survey facility under development for the four-metre-class Visible and Infrared Survey Telescope for Astronomy (VISTA) at Paranal. Its key specifications are: a large field of view (FoV) of 4.2 square degrees and a high multiplex capability, with 1624 fibres feeding two low-resolution spectrographs ($R = \lambda/\Delta\lambda \sim 6500$), and 812 fibres transferring light to the high-resolution spectrograph ($R \sim 20\,000$). After a description of the instrument and its expected performance, a short overview is given of its operational scheme and planned 4MOST Consortium science; these aspects are covered in more detail in other articles in this edition of The Messenger. Finally, the processes, schedules, and policies concerning the selection of ESO Community Surveys are presented, commencing with a singular opportunity to submit Letters of Intent for Public Surveys during the first five years of 4MOST operations

Anti-reflective coating corrrection for ultra-low-reflectance large optics

International audienceIn order to enhance the final performances of complex optical systems it is required to limit the overall wasted reflected light coming from all the different surfaces involved. Ultra-low-reflectance coating becomes even a crucial point for high sensitivity experiments such as gravitational wave detectors where surfaces must have a reflectance lower than 100 ppm. Some tenths of percent is a common value for Anti-Reflective (AR) coating but reflectance below 100 ppm is trickier to achieve. The coating design sensitivity with respect to thickness errors or refractive index error can lead quickly to noncompliant reflectance.When an AR coating has failed it is very difficult to recover the low reflectance. In theory adding one or two layers could correct the reflectance but it requires knowing exactly the actual coated stack. For large optics (diameter up to 500 mm), we developed a new technique based on reflectance measurements with different polarizations and incidence angles at one wavelength. The measurements were performed in s-polarized and p-polarized light to discriminate between several solutions. Then a correction based on one or two layers is computed in order to decrease the reflectance. The efficiency of this method is demonstrated in the case of a four-layer AR coating designed for zero reflectance at 1064nm and coated onto a 350mm diameter and 200mm thick substrate. The reflectance has decreased from 500ppm to 26ppm thanks to a correcting bilayer

Dichroic coatings for astronomical instrumentation

International audienceDue to the increasing number of astronomical projects and of their associated instruments, the request of large optics with higher optical performances does not stop growing. An important step in the manufacture of these optics is the deposition of high-precision optical coatings. To answer to this request, we developed dichroic coatings, with sharp transition for large optics, working at different angles of incidence and spectral ranges. The work done for the dichroic optics of the HRS and LRS instruments for the 4MOST project will be presented

Diversity of <i>Vibrio spp. </i>isolated at ambient environmental temperature in the Eastern English Channel as determined by <i>pyrH</i> sequencing

International audienc

Amorphous optical coatings of present gravitational-wave interferometers

We report on the results of an extensive campaign of optical and mechanical characterization of the ion-beam sputtered oxide layers (Ta2O5, TiO2, Ta2O5-TiO2, SiO2) within the high-reflection coatings of the Advanced LIGO, Advanced Virgo and KAGRA gravitational-wave detectors: Refractive index, thickness, optical absorption, composition, density, internal friction and elastic constants have been measured; the impact of deposition rate and post-deposition annealing on coating internal friction has been assessed. For Ta2O5 and SiO2 layers, coating internal friction increases with the deposition rate, whereas the annealing treatment either erases or largely reduces the gap between samples with different deposition history. For Ta2O5-TiO2 layers, the reduction of internal friction due to TiO2 doping becomes effective only if coupled with annealing. All measured samples showed a weak dependence of internal friction on frequency [\u3c6 c(f) = af b, with-0.208 &lt; b &lt; 0.140 depending on the coating material considered]. SiO2 films showed a mode-dependent loss branching, likely due to spurious losses at the coated edge of the samples. The reference loss values of the Advanced LIGO and Advanced Virgo input (ITM) and end (ETM) mirror HR coatings have been updated by using our estimated value of Young's modulus of Ta2O5-TiO2 layers (120 GPa) and are about 10% higher than previous estimations