303 research outputs found
ON CONFORMAL-MATSUMOTO CHANGE OF m-TH ROOT FINSLER METRICS
In this paper, we have considered conformal-Matsumoto change of the class of m-th root Finsler metrics. We have established the necessary and sufficient condition for the transformed metric to be projectively flat or locally dually flat. Further, we have proved the non-existence of the concerned metric which is projectively flat with non-zero flag curvature
3D Printed TCP-Based Scaffold Incorporating VEGF-Loaded PLGA Microspheres for Craniofacial Tissue Engineering
Objective Vascularization is a critical process during bone regeneration/repair and the lack of tissue vascularization is recognized as a major challenge in applying bone tissue engineeringmethods for cranial and maxillofacial surgeries. The aim of our study is to fabricate a vascular endothelial growth factor (VEGF)-loaded gelatin/alginate/β-TCP composite scaffold by 3D printing method using a computer-assisted design (CAD) model. Methods The paste, composed of (VEGF-loaded PLGA)-containing gelatin/alginate/β-TCP in water, was loaded into standard Nordson cartridges and promptly employed for printing the scaffolds. Rheological characterization of various gelatin/alginate/β-TCP formulations led to an optimized paste as a printable bioink at room temperature. Results The in vitro release kinetics of the loaded VEGF revealed that the designed scaffolds fulfill the bioavailability of VEGF required for vascularization in the early stages of tissue regeneration. The results were confirmed by two times increment of proliferation of human umbilical vein endothelial cells (HUVECs) seeded on the scaffolds after 10 days. The compressive modulus of the scaffolds, 98 ± 11 MPa, was found to be in the range of cancellous bone suggesting their potential application for craniofacial tissue engineering. Osteoblast culture on the scaffolds showed that the construct supports cell viability, adhesion and proliferation. It was found that the ALP activity increased over 50% using VEGF-loaded scaffolds after 2 weeks of culture. Significance The 3D printed gelatin/alginate/β-TCP scaffold with slow releasing of VEGF can be considered as a potential candidate for regeneration of craniofacial defects
The Efficacy of Commercial Tooth Storage Media for Maintaining the Viability of Human Periodontal Ligament Fibroblasts
Aim
To evaluate Save‐A‐Tooth (SAT), EMT Toothsaver (EMT) and Hank\u27s Balanced Salt Solution (HBSS) for their influence on the viability and proliferative capacity of human periodontal ligament fibroblasts (HPDLFs). Methodology
Primary HPDLFs were seeded into 96‐well cell culture plates and exposed to SAT, EMT, HBSS and water (negative control) for 0.5, 1, 3, 6, 12 and 24 h at room temperature (22 °C). After each exposure time, cell viability was measured through quantifying adenosine triphosphate (ATP) using a luminescent dye. The proliferative capacity was also quantified using the PrestoBlue assay after 12 or 24 h storage in each medium. The data were analysed statistically by two‐way anova and post hoc Least Significant Difference (LSD) test (P \u3c 0.05). The morphology of the cells after 12 h storage was also investigated through live/dead viability/cytotoxicity kit together with fluorescence microscopy. Results
There was no significant difference in cell viability amongst HBSS, SAT and EMT groups up to 6 h. SAT was effective in maintaining cell viability only up to 12 h and then became detrimental to HPDLF; after 24 h, the effectiveness of SAT in maintaining cell viability was similar to that of water (P \u3e 0.05). Amongst all the media, only EMT could maintain the proliferative capacity of HPDLFs significantly higher than the negative control, that is water (P \u3c 0.05) after 24 h storage. Conclusion
EMT maintained the proliferative capacity of HPDLFs after 24 h storage
Biomodification of a class-v restorative material by incorporation of bioactive agents
Restoring subgingival class-V cavities successfully, demand special biological properties from a restorative material. This study aimed to assess the effects of incorporating bioactive materials to glass ionomer cement (GIC) on its mechanical and biological properties. Hydroxyapatite, chitosan, chondroitin sulphate, bioglass, gelatine and processed bovine dentin were incorporated into a GIC restorative material. Compressive strength, biaxial flexural strength (BFS), hardness, setting and working time measurements were investigated. Biocompatibility of the new materials was assessed using both monolayer cell cultures of normal oral fibroblasts (NOF) and TR146 keratinocytes, and a 3D-tissue engineered human oral mucosa model (3D-OMM) using presto-blue tissue viability assay and histological examination. Significant reduction in the compressive strength and BFS of gelatine-modified discs was observed, while chondroitin sulphate-modified discs had reduced BFS only (p value > 0.05). For hardness, working and setting times, only bioglass caused significant increase in the working time. NOF viability was significantly increased when exposed to GIC-modified with bovine dentine, bioglass and chitosan. Histological examination showed curling and growth of the epithelial layer toward the disc space, except for the GIC modified with gelatine. This study has highlighted the potential for clinical application of the modified GICs with hydroxyapatite, chitosan, bioglass and bovine dentine in subgingival class-V restorations
Effects of electronic cigarette liquid on monolayer and 3D tissue-engineered models of human gingival mucosa
Background. There is limited data available on potential biological effects of E-cigarettes on human oral tissues. The aim of this study was to evaluate the effects of E-cigarette liquid on the proliferation of normal and cancerous monolayer and 3D models of human oral mucosa and oral wound healing after short-term and medium-term exposure.
Methods. Normal human oral fibroblasts (NOF), immortalized OKF6-TERET-2 human oral keratinocytes, and cancerous TR146 keratinocyte monolayer cultures and 3D tissue engineered oral mucosal models were exposed to different concentrations (0.1%, 1%, 5% and 10%) of E-cigarette liquid (12 mg/ml nicotine) for 1 hour daily for three days and for 7 days. Tissue viability was monitored using the PrestoBlue assay. Wounds were also produced in the middle surface of the monolayer systems vertically using a disposable cell scraper. The alterations in the cell morphology and wound healing were visualized using light microscopy and histological examination.
Results. Statistical analysis showed medium-term exposure of TR146 keratinocytes to 5% and 10% E-liquid concentrations significantly increased the viability of the cancer cells compared to the negative control. Short-term exposure of NOFs to 10% E-liquid significantly reduced the cell viability, whereas medium-term exposure to all E-liquid concentrations significantly reduced the NOF cells’ viability. OKF6 cells exhibited significantly lower viability following short-term and mediumterm exposure to all E-cigarette concentrations compared to the negative control. 3D oral mucosal model containing normal oral fibroblasts and keratinocytes showed significant reduction in tissue viability after exposure to 10% E-liquid, whereas medium-term exposure resulted in significantly lower viability in 5% and 10% concentration groups compared to the negative control. There was a statistically significant difference in wound healing times of both NOF and OKF6 cells after exposure to 1%, 5% and 10% E-cigarette liquid.
Conclusion. Medium-term exposure to high concentrations of the E-cigarette liquid had cytotoxic effects on normal human oral fibroblasts and OKF6 keratinocytes, but a stimulatory cumulative effect on the growth of cancerous TR146 keratinocyte cells as assessed by the PrestoBlue assay and histological evaluation of 3D oral mucosal models. In addition, E-liquid exposure prolonged the wound healing of NOF and OKF6 oral mucosa cells
Identification of New Drug Candidates Against \u3cem\u3eBorrelia burgdorferi\u3c/em\u3e Using High-Throughput Screening
Lyme disease is the most common zoonotic bacterial disease in North America. It is estimated that .300,000 cases per annum are reported in USA alone. A total of 10%–20% of patients who have been treated with antibiotic therapy report the recrudescence of symptoms, such as muscle and joint pain, psychosocial and cognitive difficulties, and generalized fatigue. This condition is referred to as posttreatment Lyme disease syndrome. While there is no evidence for the presence of viable infectious organisms in individuals with posttreatment Lyme disease syndrome, some researchers found surviving Borrelia burgdorferi population in rodents and primates even after antibiotic treatment. Although such observations need more ratification, there is unmet need for developing the therapeutic agents that focus on removing the persisting bacterial form of B. burgdorferi in rodent and nonhuman primates. For this purpose, high-throughput screening was done using BacTiter-Glo assay for four compound libraries to identify candidates that stop the growth of B. burgdorferi in vitro. The four chemical libraries containing 4,366 compounds (80% Food and Drug Administration [FDA] approved) that were screened are Library of Pharmacologically Active Compounds (LOPAC1280), the National Institutes of Health Clinical Collection, the Microsource Spectrum, and the Biomol FDA. We subsequently identified 150 unique compounds, which inhibited .90% of B. burgdorferi growth at a concentration of ,25 µM. These 150 unique compounds comprise many safe antibiotics, chemical compounds, and also small molecules from plant sources. Of the 150 unique compounds, 101 compounds are FDA approved. We selected the top 20 FDA-approved molecules based on safety and potency and studied their minimum inhibitory concentration and minimum bactericidal concentration. The promising safe FDA-approved candidates that show low minimum inhibitory concentration and minimum bactericidal concentration values can be chosen as lead molecules for further advanced studies
Tribological behaviour of AZ31 magnesium alloy reinforced by bimodal size B4C after precipitation hardening
This study investigated dry sliding wear properties of AZ31 magnesium alloy and B4C-reinforced AZ31 composites containing 5, 10, and 20 wt.% B4C with bimodal sizes under different loadings (10–80 N) at various sliding speeds (0.1–1 m/s) via the pin-on-disc configuration. Microhardness evaluations showed that when the distribution of B4C particles was uniform the hardness of the composites increased by enhancing the reinforcement content. The unreinforced alloy and the composite samples were examined to determine the wear mechanism maps and identify the dominant wear mechanisms in each wear condition and reinforcement content. For this purpose, wear rates and friction coefficients were recorded during the wear tests and worn surfaces were characterized by scanning electron microscopy and energy dispersive X-ray spectrometry analyses. The determined wear mechanisms were abrasion, oxidation, delamination, adhesion, and plastic deformation as a result of thermal softening and melting. The wear evaluations revealed that the composites containing 5 and 10 wt.% B4C had a significantly higher wear resistance in all the conditions. However, 20 wt.% B4C/AZ31 composite had a lower resistance at high sliding speeds (0.5–1 m/s) and high loadings (40–80 N) in comparison with the unreinforced alloy. The highest wear resistance was obtained at high sliding speeds and low loadings with the domination of oxidative wear
Nanomagnetic-Mediated Drug Delivery for The Treatment of Dental Disease
Maintaining the vitality of the dental pulp, the highly innervated and highly vascular, innermost layer of the tooth, is a critical goal of any dental procedure. Upon injury, targeting the pulp with specific therapies is challenging because it is encased in hard tissues. This project describes a method that can effectively deliver therapeutic agents to the pulp. This method relies on the use of nanoparticles that can be actively steered using magnetic forces to the pulp, traveling through naturally occurring channels in the dentin (the middle layer of the tooth). This method can reduce the inflammation of injured pulp and improve the penetration of dental adhesives into dentin. Such a delivery method would be less expensive, and both less painful and less traumatic than existing therapeutic options available for treatment of injured dental pulp. This technique would be simple and could be readily translated to clinical use
Structures, Deformation Mechanisms and Tectonic Phases, Recorded in Paleoproterozoic Granitoids of West African Craton, Southern Part: Example of Kan’s Complex (Central of Côte d’Ivoire)
The granito-gneissic complex of Kan is located in the central part of the Paleoproterozoic domain of Côte d’Ivoire. It consists essentially of migmatitic and mylonitic gneisses with basic intrusions and xenoliths. This Proterozoic domain belongs to the Man Leo shield, southern part of West African craton (WAC). The present study, essentially based on a structural analysis at outcrop scale, aims to identify deformation mechanisms and tectonic phasesrecorded in the granito-gneissic complex of Kan. Deformation mechanisms include: (1) flattening, (2) constriction, (3) simple shear (4), rotation (5), brittle shear, and (6) extension. The Kan complex deformation occurred during four major tectonic phases named D1, D2, D3 and D4. D1 corresponds to WNW-ESE compression. It led to the formation of NS to NNE-SSW foliation, of stretching lineation, and of folds with sub-horizontal axes. It is accompanied by N170° and N10° sinistral shear zones, which constitute globally a NS major transcurrent shear zone in the central part of Côte d’Ivoire. D1 is also marked by N90° dextral shear zones. Tectonic phase D2 is associated with EW compression. It is marked by N50° dextral and N110° sinistral transcurents shear zones. D3 corresponds to NNE-SSW compressive phase and is responsible of N110° crenulation cleavage formation. (D4) constitutes a brittle deformation phase. It correspondsto posteburnean deformation in the Proterozoic crust of Côte d'Ivoire. Generally, these deformation phases are similar to D2 and D3 reported in the Man-Leo shield and that are part of regional collisional phase referred to as Eburnean orogeny in the WAC
A fast and accurate method for automatic coronary arterial tree extraction in angiograms
Coronary arterial tree extraction in angiograms is an essential component of each cardiac image processing system. Once physicians decide to check up coronary arteries from x-ray angiograms, extraction must be done precisely, fast, automatically and including whole arterial tree to help diagnosis or treatment during the cardiac surgical operation. This application is very helpful for the surgeon on deciding the target vessels prior to coronary artery bypass graft surgery. Some techniques and algorithms are proposed for extracting coronary arteries in angiograms. However, most of them suffer from some disadvantages such as time complexity, low accuracy, extracting only parts of main arteries instead of the full coronary arterial tree, need manual segmentation, appearance of artifacts and so forth. This study presents a new method for extracting whole coronary arterial tree in angiography images using Starlet wavelet transform. To this end, firstly we remove noise from raw angiograms and then sharpen the coronary arteries. Then coronary arterial tree is extracted by applying a modified Starlet wavelet transform and afterwards the residual noises and artifacts are cleaned. For evaluation, we measure proposed method performance on our created data set from 4932 Left Coronary Artery (LCA) and Right Coronary Artery (RCA) angiograms and compared with some state-of-the-art approaches. The proposed method shows much higher accuracy 96% for LCA and 97% for RCA, higher sensitivity 86% for LCA and 89% for RCA, higher specificity 98% for LCA and 99% for RCA and also higher precision 87% for LCA and 93% for RCA angiograms
- …