233 research outputs found
Analysis and characterizations of planar transmission structures and components for superconducting and monolithic integrated circuits
The analysis and modeling of superconducting planar transmission lines were performed. Theoretically, the highest possible Q values of superconducting microstrip line was calculated and, as a result, it provided the Q value that the experiment can aim for. As an effort to search for a proper superconducting transmission line structure, the superconducting microstrip line and coplanar waveguide were compared in terms of loss characteristics and their design aspects. Also, the research was expanded to a superconducting coplanar waveguide family in the microwave packaging environment. Theoretically, it was pointed out that the substrate loss is critical in the superconducting transmission line structures
The 2x2 quasi-optical power combiner array at 20 GHz
Investigation of a power combiner made of two FET oscillators for an active array are reported. As an approach by a quasi-optical method, a two-dimensional planar array of strongly coupled oscillators by direct connection through a microstrip line is used. In-phase condition between the oscillators as well as in-phase condition of each radiation wave was accomplished by regulating length of feed microstrip lines. The radiation elements of 1 lambda-slot are embedded in a circuit ground plane. At an operation frequency of 20 GHz, in both H- and E-planes, reasonable sigma radiation patterns were obtained which have good agreement with theoretical patterns
Microwave Circuits Based on Negative Refractive Index Material Structures
The paper presents the fundamentals of composite right/left-handed (CRLH)transmission lines and materials,and proposes an accurate circuit model of these structures for the design of practical applications.Three novel applications of CRLH meta-structures,developed at UCLA,are demonstrated:an arbitrary coupling-level backward-wave coupler,a zero th order resonator and a distributed planar negative lens
Analysis and characterizations of planar transmission structures and components for superconducting and monolithic integrated circuits
The research effort was continued to design and characterize superconducting transmission line structures. The research during this period was concentrated on the implementation of a superconductor into coplanar waveguide structures. First, the superconducting coplanar waveguide was examined, and compared with a superconducting microstrip line in terms of loss characteristics and their design aspects. Then, the research was carried on the design and characterization of the coplanar waveguide family in the packaging environment. The transition between the coaxial line to the conductor backed coplanar waveguide was also designed for the measurement of the superconducting conductor backed coplanar waveguide
Spectral domain immitance approach for dispersion characteristics of generalized printed transmission lines
Abstract-A simple method for formofating the dyadic Green's functions in the spectral domain is presented for generalized printed traaaroiasion fines wbieh contain severaf dielectric layers and conductors appearing at several dielectric interfaa+s. The method is based on the transverse equivalent tranamiwion line for a spectraf wave and on a simple coordinate transformation. Tfds formulation process is so simple that often it is accompfiibed afmost by inspection of the physicaf cross-aectionaf sbwture of the transmission fine. Tbe method is applied to a new versatile transmission Iinq a mfcrastrfp-slot~me, and some numerical results are presented
120-GHz HEMT Oscillator With Surface-Wave-Assisted Antenna
Two monolithic microwave integrated circuits (MMICs) have been designed and built to function together as a source of electromagnetic radiation at a frequency of 120 GHz. One of the MMICs is an oscillator and is the highest-power 120-GHz oscillator reported thus far in the literature. The other MMIC is an end-fire antenna that radiates the oscillator signal. Although these MMICs were constructed as separate units and electrically connected with wire bonds, future oscillator/ antenna combinations could readily be fabricated as monolithic integrated units. Such units could be used as relatively high-power solid-state microwave sources in diverse applications that include automotive radar, imaging, scientific instrumentation, communications, and radio astronomy. As such, these units would be attractive alternatives to vacuum-tube oscillators, which are still used to obtain acceptably high power in the frequency range of interest. The oscillator (see figure) includes a high-electron-mobility transistor (HEMT), with gate-periphery dimensions of 4 by 37 m, in a common-source configuration. The series feedback element of the oscillator is a grounded coplanar waveguide (CPW) at the source. The HEMT is biased for class-A operation (meaning that current is conducted throughout the oscillation cycle) to maximize the output power of the oscillator. Input and output impedance-matching circuit elements are designed to maximize output power and to establish the conditions needed for oscillation. The design of the antenna takes advantage of surface waves, which, heretofore, have been regarded as highly disadvantageous because they can leak power and degrade the performances of antennas that have not been designed to exploit them. Measures taken to suppress surface waves have included complex machining of circuit substrates and addition of separate substrates. These measures are difficult to implement in standard MMIC fabrication processes. In contrast, because the design of the present antenna eliminates the need to suppress surface waves, the fabrication of the antenna is fully compatible with standard MMIC fabrication processes
Tatsuo Itoh : discurs llegit a la cerimònia d'investidura celebrada a la Sala d'Actes del Rectorat el dia 14 d'octubre de l'any 2015
Tatsuo Itoh va ser investit doctor honoris causa per la UAB per les seves rellevants contribucions a l'enginyeria de radiofreqüència/microones i de les telecomunicacions.Nomenament 19/03/2015. A proposta de l'Escola d'Enginyeria. L'acte d'investidura va tenir lloc el 14 d'octubre de 201
Planar Resonant Blazed Gratings from a Circuit Model Standpoint
The equivalent circuit approach (ECA) is used in this work to analyze and design a previously proposed one-dimensional planar blazed grating of the resonant type. The analysis covers both the classical Littrow configuration, when the direction of the relevant diffracted order coincides with that of the incident wave (Bragg blazing), and when these directions are different (off-Bragg blazing). Once the scattering problem of the grating structure is posed as a discontinuity problem inside an equivalent generalized waveguide (corresponding to the unit cell of the original structure) and studied in terms of its equivalent circuit network, the possibility of transferring all the power of the incident plane wave into one single-diffraction order is seen as a simple impedance matching problem. An associated resonance phenomenon is also found to be implicitly associated with this matching condition. This simplifying and fruitful standpoint makes it possible to set up a systematic design procedure to find the specifications of the planar grating for either Bragg or non-Bragg blazing operation. Dielectric and strong skin-effect ohmic losses are easily implemented in the ECA and its effects in the practical design of structures are discussed.Ministerio de Ciencia, Investigación y Universidades TEC2017-84724-PJunta de Andalucía TIC-11
Frequency-Scanning Phased-Array Feed Network Based on Composite Right/Left-Handed Transmission Lines
- …