215 research outputs found
LCA of virgin and recycled materials to assess the sustainability of paved surfaces in agricultural environment
The construction sector is currently characterized by high raw material consumption but also by the production of high volume of wastes, mostly constituted by construction and demolition wastes that could be valorized promoting the use of recycled aggregates in substitution of raw aggregates. A promising application for recycled aggregates is for the realization of rural roads and pavements. The agricultural context, characterized by particular type of traffic and need to balance performance and integration with the environment, is suited for the use of these materials for paved surfaces since it can promote, in several cases, the adoption of rural circular processes internal to the farm. However, if on one hand the adoption of recycled aggregates could increase the sustainability of the sector, on the other it could increment the environmental loads if the whole process is not properly organized. For instance, the negative effects of transportation operations can cancel the environmental benefits if high distances between the production and the destination sites are present. This work reports the results of the Life Cycle Assessment (LCA), from cradle-to-gate, of four different construction aggregate classes that can be used for the realization of rural roads, pavements and forecourts, and paved areas in agricultural environment. The first three materials are recycled aggregates produced by the recycling processes of construction and demolition waste and the fourth type refers to gravel aggregates produced from natural resources. The Life Cycle Assessment was realized using site-specific primary data from the local territorial context and paying particular attention to transportation-related impacts, land use, avoided landfill and preservation of non-renewable resources. The results of the work clearly show that the environmental impacts in both scenarios of recycled aggregates are lower than the virgin aggregate scenario. In fact, considering the midpoint categories, the recycled materials proved to be more virtuous in almost all the indicators, with the exception of except for the marine eutrophication. The most significant gap between virgin and recycled materials has been in global warming and marine and freshwater eco-toxicity
Targeted industrial policy and government failures: insights from the South Korean experience
Purpose: The purpose of this paper is to reflect on the efficiency and effectiveness of industrial policies by focusing on the peculiar experience of South Korea. It analyzes Korean structural change from a historical and empirical standpoint, highlighting industrial policy interventions involved in this process. The analysis presented offers important insights to inform the debate on the contemporary industrial policy, identifying specific elements and circumstances that can contribute to mitigate government failures and to improve the effectiveness of public action. Design/methodology/approach: The paper adopts a historical and empirical perspective. Concerning the empirical analysis, a composite indicator to assess the process of structural change of economies is presented. This methodology provides annual rankings based on the different economic relevance of the manufacturing sectors over the period 1963–2012. Findings: The paper shows that industrial policy has been extensively involved in South Korean structural development but public intervention interacted with several other factors, including gradual markets liberalization, education, societal and cultural characteristics and low level of income inequalities. As a result, economic development is conceived as systemic process, namely as the outcome of a balance in the roles played by government, markets and civil society. In this framework, government failures, as inability of the government to respond effectively and efficiently to the general interest of the society, are intimately inherent to the mechanisms that rule the relevant relationships within the system. Originality/value: In the post-crisis debate, very little attention has been devoted in academic and political debate to the ways to mitigate government failures. By analyzing the historical and recent Korean experience with industrial policy, the paper addresses an issue insufficiently analyzed offering an innovative contribution
3D numerical modelling of temperature and humidity index distribution in livestock structures: a cattle-barn case study
In dairy cattle farming, heat stress largely impairs production, health, and animal welfare. This study aims to develop a workflow and a numerical analysis procedure to provide a real-time 3D distribution of the temperature and humidity index (THI) in a generic cattle barn based on temperature and humidity monitored in sample points, besides characterising the relationship between indoor THI and outside weather conditions. This research was carried out with reference to the study case of a cattle barn. A model has been developed to define the indoor three-dimensional spatial distribution of the Temperature-Humidity Index of a cattle barn based on environmental measurements at different heights of the building. As a core of the model, the Discrete Sibson Interpolation method was used to render a point cloud representing the THI values in the non-sampled areas. The area between 1-2 meters was emphasised as the region of most significant interest to quantify the heat waves perceived by dairy cows. The model represents an effective tool to distinguish different areas of the animal-occupied zone characterised by different values of THI
Politica industriale e sviluppo sostenibile
Il libro riproduce ed amplia le relazioni presentate al workshop del 3 ottobre
2014 presso il Dipartimento di Economia dell’Università di Parma, ad opera
di studiosi appartenenti all’Università di Ferrara, allo Iefe-Università Bocconi
di Milano, all’Università di Modena, alla Scuola Sant’Anna di Pisa, nonché alla
stessa Università di Parma.
I cinque contributi qui presentati fotografano cinque diversi aspetti del rapporto
fra politica industriale (più in generale crescita economica diretta dalle istituzioni
pubbliche) e sviluppo sostenibile:
a livello nazionale, il possibile trade-off fra i due obiettivi di politica industriale
e di sostenibilità ambientale nel tentativo di gerarchizzare i “settori
strategici”, e la necessità che questo trade-off sia parzialmente compensato a
livello di sforzo innovativo (Di Tommaso e Tassinari);
a livello internazionale, la possibilità che politiche industriali nazionali non
operino all’interno di un gioco a somma zero, ma diano risultati favorevoli al
raggiungimento di un bene pubblico globale quale il cambiamento climatico
(Fabbri e Ninni);
a livello di imprese, la tendenziale riduzione delle contraddizioni fra incentivi
al loro operare e “impronta” ambientale, grazie agli accordi volontari e in
particolare all’importante ruolo della certificazione (Frey);
a livello di istituzioni, l’esistenza di tipologie diverse di obiettivi e di strumenti
a livello nazionale e a livello locale, e l’analisi in un confronto tra paesi
europei delle caratteristiche delle politiche ambientali impostate a livello
sub-nazionale (Croci e Molteni);
a livello di mercato del lavoro, l’effetto sul tessuto industriale delle politiche di aumento della flessibilità del lavoro nella singola impresa, come aspetto
particolare di una ridiscussione più ampia del concetto di sostenibilità
ambientale e dei suoi rapporti con la politica nei confronti delle imprese
(Giovannetti)
Analysis of Horse Myostatin Gene and Identification of Single Nucleotide Polymorphisms in Breeds of Different Morphological Types
Myostatin (MSTN) is a negative modulator of muscle mass. We characterized the horse (Equus caballus) MSTN gene and identified and analysed single nucleotide polymorphisms (SNPs) in breeds of different morphological types. Sequencing of coding, untranslated, intronic, and regulatory regions of MSTN gene in 12 horses from 10 breeds revealed seven SNPs: two in the promoter, four in intron 1, and one in intron 2. The SNPs of the promoter (GQ183900:g.26T>C and GQ183900:g.156T>C, the latter located within a conserved TATA-box like motif) were screened in 396 horses from 16 breeds. The g.26C and the g.156C alleles presented higher frequency in heavy (brachymorphic type) than in light breeds (dolichomorphic type such as Italian Trotter breed). The significant difference of allele frequencies for the SNPs at the promoter and analysis of molecular variance (AMOVA) on haplotypes indicates that these polymorphisms could be associated with variability of morphology traits in horse breeds
Experimental calibration of underground heat transfer models under a winery building in a rural area
Ground temperature and hydrogeological conditions are key parameters for many engineering applications, such as the
design of building basements and underground spaces and the assessment of shallow geothermal energy potential.
Especially in urban areas, in the very shallow depths, it is diffi cult to fi nd natural undisturbed underground thermal
conditions because of anthropic interventions. The assessment of underground behaviour in disturbed conditions will
become more and more relevant because of increasing awareness to energy effi ciency and renewable energy topics. The
purpose of this paper is to show a three-dimensional representation - based on models calibrated on experimental data
- of the underground thermal behaviour aff ected by a building in a rural area in Italy. Temperature varies in space and
time and it depends on ground, climate and building characteristics, and all these parameters are taken into account by
the seasonal periodic modelling implemented. The results obtained in a context of low urbanization indirectly suggest
the importance of these eff ects in dense urban areas; taking greater account of these aspects could lead to improvements
in the design of underground spaces and geo-exchanger fi elds for geothermal energy exploitation
Microventilation system improves the ageing conditions in existent wine cellars
Background and Aims: The importance of indoor environmental conditions in a cellar is well known and continuously investigated. The process of wine ageing consists of several steps, during which temperature (T) and relative humidity (RH) play a fundamental role as the quality of the final product is strongly related to stable and suitable environmental conditions. Critical factors, such as mould growth or wine evaporation, have emerged when ventilation has proved to be insufficient or poorly designed. The limitation of stagnant areas and the homogeneity inT and RH provide for proper wine conservation; however, unwanted local conditions can occur in the zones with insufficient air exchange. Methods and Results: Considering these aspects, a controlled microventilation and monitoring system was installed in a case study cellar, and T and RH were monitored for 1 year. The data have been analysed to investigate criticalities of the environmental conditions. The ventilation was activated in specific critical conditions to increase the homogeneity of the T and RH in the critical zones. The results show that the microventilation system improves the homogeneity of both T and RH without affecting the average values. Conclusions: The study demonstrated the efficacy of the system and indicated possible modifications to improve system performance. Significance of the Study: The system proved to be a useful tool for both improving the environmental conditions and providing useful information to the winemakers about the ageing conditions
- …