Design of ternary signals for MIMO identification in the presence of noise and nonlinear distortion

A new approach to designing sets of ternary periodic signals with different periods for multi-input multi-output system identification is described. The signals are pseudo-random signals with uniform nonzero harmonics, generated from Galois field GF(q), where q is a prime or a power of a prime. The signals are designed to be uncorrelated, so that effects of different inputs can be easily decoupled. However, correlated harmonics can be included if necessary, for applications in the identification of ill-conditioned processes. A design table is given for q les 31. An example is presented for the design of five uncorrelated signals with a common period N = 168 . Three of these signals are applied to identify the transfer function matrix as well as the singular values of a simulated distillation column. Results obtained are compared with those achieved using two alternative methods

The influence of atmosphere on the performance of pure-phase WZ and ZB InAs nanowire transistors

We compare the characteristics of phase-pure MOCVD grown ZB and WZ InAs nanowire transistors in several atmospheres: air, dry pure N$_2$ and O$_2$, and N$_2$ bubbled through liquid H$_2$O and alcohols to identify whether phase-related structural/surface differences affect their response. Both WZ and ZB give poor gate characteristics in dry state. Adsorption of polar species reduces off-current by 2-3 orders of magnitude, increases on-off ratio and significantly reduces sub-threshold slope. The key difference is the greater sensitivity of WZ to low adsorbate level. We attribute this to facet structure and its influence on the separation between conduction electrons and surface adsorption sites. We highlight the important role adsorbed species play in nanowire device characterisation. WZ is commonly thought superior to ZB in InAs nanowire transistors. We show this is an artefact of the moderate humidity found in ambient laboratory conditions: WZ and ZB perform equally poorly in the dry gas limit yet equally well in the wet gas limit. We also highlight the vital role density-lowering disorder has in improving gate characteristics, be it stacking faults in mixed-phase WZ or surface adsorbates in pure-phase nanowires.Comment: Accepted for publication in Nanotechnolog

A synchronization technique for optical PPM signals

A technique for maintaining synchronization between optical PPM (pulse-position modulation) pulses and a receiver clock by means of a delay-tracking loop is described and analyzed. The tracking loop is driven by a doubly stochastic Poisson process that contains information about the location of the desired slot boundaries. The slot boundaries are subject to slowly varying random delays that are ultimately tracked by the loop. The concept of fractional rms delay error is introduced to quantify the effects of signal and background induced shot noise on the performance of the delay-tracking loop

Hot Electron Effects in the 2D Superconductor-Insulator Transition

The parallel magnetic field tuned two-dimensional superconductor-insulator transition has been investigated in ultrathin films of amorphous Bi. The resistance is found to be independent of temperature on both sides of the transition below approximately 120 mK. Several observations suggest that this regime is not intrinsically "metallic" but results from the failure of the films' electrons to cool. The onset of this temperature-independent regime can be moved to higher temperatures by either increasing the measuring current or the level of electromagnetic noise. Temperature scaling is successful above 120 mK. Electric field scaling can be mapped onto temperature scaling by relating the electric fields to elevated electron temperatures. These results cast doubt on the existence of an intrinsic metallic regime and on the independent determination of the correlation length and dynamical critical exponents obtained by combining the results of electric field and temperature scaling.Comment: 4 pages, 4 figure

Experiments on identification and control of inflow disturbances in contracting streams

Vorticity from all surfaces and isolated objects in the vicinity of the fan intake, including the outside surfaces of the fan housing, were identified as the major sources for disturbances leading to blade passing frequency noise. The previously proposed mechanism based on atmospheric turbulence is refuted. Flow visualization and hot wire techniques were used in three different facilities to document the evolution of various types of disturbances, including the details of the mean flow and turbulence characteristics. The results suggest that special attention must be devoted to the design of the inlet and that geometric modeling may not lead to adequate simulation of the in flight characteristics. While honeycomb type flow manipulators appear to be effective in reducing some of the disturbances, higher pressure drop devices that generate adequate turbulence, for mixing of isolated nonuniformities, may be necessary to suppress the remaining disturbances. The results are also applicable to the design of inlets of open return wind tunnels and similar flow facilities

Thermal wavelength-selective switch based on micro-ring resonators

A thermally driven wavelength-selective switch, based on integrated-optic micro-ring resonators is described. This configuration allows high ON/OFF ratios combined with small dimensions. Measurements of the thermal behaviour of a single resonator confirm the switching capability

Thermally Tuneable, Wide FSR Switch based on Micro-ring Resonators

A thermally tuneable, wide FSR switch, based on integrated-optic micro-ring resonators is described. This wavelength-selective switch allows high ON/OFF ratios combined with small dimensions. Furthermore allows the structure for a wide Free Spectral Range, since multiple resonators are used. This switch can be used in WDM filter arrays for a transceiver in an access network. Measurements of the thermal behaviour of a single resonator confirm the switching capability of the switch

Explicit robust schemes for implementation of a class of principal value-based constitutive models: Symbolic and numeric implementation

The issue of developing effective and robust schemes to implement a class of the Ogden-type hyperelastic constitutive models is addressed. To this end, special purpose functions (running under MACSYMA) are developed for the symbolic derivation, evaluation, and automatic FORTRAN code generation of explicit expressions for the corresponding stress function and material tangent stiffness tensors. These explicit forms are valid over the entire deformation range, since the singularities resulting from repeated principal-stretch values have been theoretically removed. The required computational algorithms are outlined, and the resulting FORTRAN computer code is presented

Effects of probiotic supplementation on broiler performance

A study on the effect of probiotic supplementation on broiler performance was carried out with 600 one day-old Avian broiler chicks. The duration of study was 35 days and a commercially prepared lactobacillus culture was given to the treated birds via drinking water throughout the 35 days. The results showed that the live weight of the treated bird was significantly (P<0.05) improved at 21, 28 and 35 days of age. Feed conversion ratio of the treated bird was significantly (P<O. 05) improved after the first week. The treated bird had a better, but not significantly different, daily live weight gain and total feed intake than the control bird. Probiotic supplementation via drinking water increases the income of the broiler farmer by as much as 11.76 cents/bird

The internationalization of innovation towards the South: a historical case study of a global pharmaceutical corporation in China (1993-2017)

Intensified competition means that multinational enterprises (MNEs) are increasingly concerned with locating innovation activities in the most appropriate locations. This had led to emerging economies in the South becoming an important destination of R&D-related foreign direct investment (FDI), departing from their traditional role as low-cost production sites. Thus far, however, our understanding of this transformation process is limited. The purpose of this article is therefore to explore the process by which foreign MNEs’ low-value-adding operations in the South are transformed into high-value- adding R&D operations. Drawing on the current literature, we construct a framework of evolution consisting of four major waves of R&D internationalization and corresponding R&D objectives. To better understand how these waves have evolved over time, we focus on the South and trace the process of change using a single historical case study: AstraZeneca in China between 1993 and 2017. We find evidence of idiosyncratic location-bound conditions offering both opportunities and resources. The gradual development of these favourable conditions, along with AstraZeneca’s deepening local knowledge, triggered a transformation process in their operations in China. Our study thus offers important historical insights, which present a platform for future research providing more nuanced theoretical explanations of the four waves of R&D internationalization