Genetic Analysis of Kafirins and Their Phenotypic Correlations with Feed Quality Traits, In Vitro Digestibility, and Seed Weight in Grain Sorghum

Twenty-three entries of grain sorghum (Sorghum bicolor (L.) Moench), including eight inbred lines (five males and three females) and 15 hybrids, were evaluated to determine the proportion of γ, αII, and β-αI-kafirins and their association with contents of crude protein, fat, and starch; protein digestibility; in vitro dry matter disappearance; and seed weight. The male lines included three normal-seeded lines (TX2737, TX435, and P954063) and two large-seeded lines (Eastin1 and PL-1). Female lines consisted of three common U.S. seed parent lines (Wheatland, Redlan, and SA3042). The lines and their hybrids were grown under dryland conditions at two locations in Kansas using a randomized complete block design. The effects of genotype, location, and males were significant for all kafirins. Wide variations in composition and general combining ability (GCA) for kafirin content were noted among parent lines and hybrids, with TX2737, Eastin1, and PL1 having the largest GCA values for γ (1.37), αII (1.99), and β-αI (2.57), respectively. Correlations among kafirins ranged from –0.89 to 0, whereas those of kafirins with feed quality traits, digestibility, and seed weight ranged from –0.45 to 0.48

Genetic Analysis of Kafirins and Their Phenotypic Correlations with Feed Quality Traits, In Vitro Digestibility, and Seed Weight in Grain Sorghum

Twenty-three entries of grain sorghum (Sorghum bicolor (L.) Moench), including eight inbred lines (five males and three females) and 15 hybrids, were evaluated to determine the proportion of γ, αII, and β-αI-kafirins and their association with contents of crude protein, fat, and starch; protein digestibility; in vitro dry matter disappearance; and seed weight. The male lines included three normal-seeded lines (TX2737, TX435, and P954063) and two large-seeded lines (Eastin1 and PL-1). Female lines consisted of three common U.S. seed parent lines (Wheatland, Redlan, and SA3042). The lines and their hybrids were grown under dryland conditions at two locations in Kansas using a randomized complete block design. The effects of genotype, location, and males were significant for all kafirins. Wide variations in composition and general combining ability (GCA) for kafirin content were noted among parent lines and hybrids, with TX2737, Eastin1, and PL1 having the largest GCA values for γ (1.37), αII (1.99), and β-αI (2.57), respectively. Correlations among kafirins ranged from –0.89 to 0, whereas those of kafirins with feed quality traits, digestibility, and seed weight ranged from –0.45 to 0.48

PCB and dioxin levels in plasma and human milk of 418 Dutch women and their infants. Predictive value of PCB congener levels in maternal plasma for fetal and infant's exposure to PCBs and dioxins

Polychlorinated biphenyls (PCBs) as well as dioxins (polychlorinated dibenzo-p-dioxins (PCDDs) and dibenzofurans (PCDFs)) are potentially hazardous compounds in the environment for human beings. In order to investigate PCB and dioxin exposure of Dutch women and their neonates, levels were examined in 418 mother-infant pairs. Four non-planar PCB congener levels (PCB 118, 138, 153 and 180) were measured in maternal plasma and in umbilical cord plasma. The 209 mothers who breast-fed their infants collected human milk samples for the analysis of seventeen 2,3,7,8-substituted PCDD and PCDF congener levels, three planar PCB and twenty-three non-planar PCB congener levels. The dioxin and planar PCB levels we measured in human milk (mean 30 respectively 16 pg TEQ/g fat), belong to the highest background levels analysed all over the world but they are in the normal range for highly industrialised, densely populated countries in Western Europe. Correlation coefficients between PCB 118, 138, 153 and 180 congener levels in maternal plasma and PCB levels in cord plasma or PCB and dioxin levels in human milk are highly significant. However, the 95% predictive interval is too wide to predict accurately the PCB and dioxin levels to which an individual infant is exposed in utero or postnatally by breast-feeding, from the PCB levels in maternal plasma

Perinatal exposure to polychlorinated biphenyls and dioxins and its effect on neonatal neurological development

Polychlorinated biphenyls (PCBs) and dioxins (polychlorinated dibenzo-p-dioxins (PCDDs), and dibenzofurans (PCDFs)) are widespread environmental contaminants which are neurotoxic in animals. Perinatal exposure to PCBs, PCDDs, and PCDFs occurs prenatally via the placenta and postnatally via breast milk. To investigate whether such an exposure affects the neonatal neurological condition, the neurological optimality of 418 Dutch newborns was evaluated with the Prechtl neurological examination. Half of the infants were breast-fed, the other half were formula-fed, representing a relatively high against a relatively low postnatally exposed group, respectively. As an index of prenatal exposure, four non-planar PCBs in cord and maternal plasma were used. These PCB levels were not related to neurological function. As measures of combined pre- and early neonatal exposure, 17 dioxin congeners, three planar, and 23 non-planar PCB congeners were determined in human milk in the second week after delivery. Higher levels of PCBs, PCDDs, and PCDFs in breast milk were related to reduced neonatal neurological optimality. Higher levels of planar PCBs in breast milk were associated with a higher incidence of hypotonia. This study confirms previous reports about the neurotoxic effects of these compounds on the developing brain of newborn infants

A novel mechanical cleavage method for synthesizing few-layer graphenes

A novel method to synthesize few layer graphene from bulk graphite by mechanical cleavage is presented here. The method involves the use of an ultrasharp single crystal diamond wedge to cleave a highly ordered pyrolytic graphite sample to generate the graphene layers. Cleaving is aided by the use of ultrasonic oscillations along the wedge. Characterization of the obtained layers shows that the process is able to synthesize graphene layers with an area of a few micrometers. Application of oscillation enhances the quality of the layers produced with the layers having a reduced crystallite size as determined from the Raman spectrum. Interesting edge structures are observed that needs further investigation

Oxidation resistance of graphene-coated Cu and Cu/Ni alloy

The ability to protect refined metals from reactive environments is vital to many industrial and academic applications. Current solutions, however, typically introduce several negative effects, including increased thickness and changes in the metal physical properties. In this paper, we demonstrate for the first time the ability of graphene films grown by chemical vapor deposition to protect the surface of the metallic growth substrates of Cu and Cu/Ni alloy from air oxidation. SEM, Raman spectroscopy, and XPS studies show that the metal surface is well protected from oxidation even after heating at 200 \degree C in air for up to 4 hours. Our work further shows that graphene provides effective resistance against hydrogen peroxide. This protection method offers significant advantages and can be used on any metal that catalyzes graphene growth

Probing Mechanical Properties of Graphene with Raman Spectroscopy

The use of Raman scattering techniques to study the mechanical properties of graphene films is reviewed here. The determination of Gruneisen parameters of suspended graphene sheets under uni- and bi-axial strain is discussed and the values are compared to theoretical predictions. The effects of the graphene-substrate interaction on strain and to the temperature evolution of the graphene Raman spectra are discussed. Finally, the relation between mechanical and thermal properties is presented along with the characterization of thermal properties of graphene with Raman spectroscopy.Comment: To appear in the Journal of Materials Scienc

Supercapacitance from cellulose and carbon nanotube nanocomposite fibers

Copyright © 2013 American Chemical SocietyACS AuthorChoice open access articleMultiwalled carbon nanotube (MWNT)/cellulose composite nanofibers have been prepared by electrospinning a MWNT/cellulose acetate blend solution followed by deacetylation. These composite nanofibers were then used as precursors for carbon nanofibers (CNFs). The effect of nanotubes on the stabilization of the precursor and microstructure of the resultant CNFs were investigated using thermogravimetric analysis, transmission electron microscopy and Raman spectroscopy. It is demonstrated that the incorporated MWNTs reduce the activation energy of the oxidative stabilization of cellulose nanofibers from 230 to 180 kJ mol–1. They also increase the crystallite size, structural order, and electrical conductivity of the activated CNFs (ACNFs). The surface area of the ACNFs increased upon addition of nanotubes which protrude from the fiber leading to a rougher surface. The ACNFs were used as the electrodes of a supercapacitor. The electrochemical capacitance of the ACNF derived from pure cellulose nanofibers is demonstrated to be 105 F g–1 at a current density of 10 A g–1, which increases to 145 F g–1 upon the addition of 6% of MWNTs.The authors would like to thank the [Engineering and Physical Sciences Research Council] EPSRC (EP/F036914/1 and EP/I023879/1), Guangdong and Shenzhen Innovative Research Team Program (No. 2011D052,KYPT20121228160843692), National Natural Science Foundation of China (Grant No. 21201175), R&D Funds for basic Research Program of Shenzhen (Grant No. JCYJ20120615140007998), and the Universities of Exeter and Manchester for funding this research

Quantifying defects in graphene via Raman spectroscopy at different excitation energies.

We present a Raman study of Ar(+)-bombarded graphene samples with increasing ion doses. This allows us to have a controlled, increasing, amount of defects. We find that the ratio between the D and G peak intensities, for a given defect density, strongly depends on the laser excitation energy. We quantify this effect and present a simple equation for the determination of the point defect density in graphene via Raman spectroscopy for any visible excitation energy. We note that, for all excitations, the D to G intensity ratio reaches a maximum for an interdefect distance ∼3 nm. Thus, a given ratio could correspond to two different defect densities, above or below the maximum. The analysis of the G peak width and its dispersion with excitation energy solves this ambiguity