DSMC simulations of turbulent flows at moderate Reynolds numbers

The Direct Simulation Monte Carlo (DSMC) method has been used for more than 50 years to simulate rarefied gases. The advent of modern supercomputers has brought higher-density near-continuum flows within range. This in turn has revived the debate as to whether the Boltzmann equation, which assumes molecular chaos, can be used to simulate continuum flows when they become turbulent. In an effort to settle this debate, two canonical turbulent flows are examined, and the results are compared to available continuum theoretical and numerical results for the Navier-Stokes equations

Sputter-engineering a first-order magnetic phase transition in sub-15-nm-thick single-crystal FeRh films

Equiatomic FeRh alloys undergo a fascinating first-order metamagnetic phase transition (FOMPT) just above room temperature, which has attracted reinvigorated interest for applications in spintronics. Until now, all attempts to grow nanothin FeRh alloy films have consistently shown that FeRh layers tend to grow in the Volmer-Weber growth mode. Here we show that sputter-grown sub-15-nm-thick FeRh alloy films deposited at low sputter-gas pressure, typically ∼0.1 Pa, onto (001)-oriented MgO substrates, grow in a peening-induced Frank-van der Merwe growth mode for FeRh film thicknesses above 5 nm, circumventing this major drawback. The bombardment of high-energy sputtered atoms, the atom-peening effect, induces a rebalancing between adsorbate-surface and adsorbate-adsorbate interactions, leading to the formation of a smooth continuous nanothin FeRh film. Chemical order in the films increases with the FeRh thickness, tFeRh, and varies monotonically from 0.75 up to 0.9. Specular x-ray diffraction scans around Bragg peaks show Pendellösung fringes for films with tFeRh≥5.2 nm, which reflects in smooth well-ordered densified single-crystal FeRh layers. The nanothin film's roughness varies from 0.6 down to about 0.1 nm as tFeRh increases, and scales linearly with the integral breadth of the rocking curve, proving its microstructured origin. Magnetometry shows that the FOMPT in the nanothin films is qualitatively similar to that of the bulk alloy, except for the thinnest film of 3.7 nm

Direct visualization of the magnetostructural phase transition in nanoscale FeRh thin films using differential phase contrast imaging

To advance the use of thermally activated magnetic materials in device applications it is necessary to examine their behavior on the localized scale operando conditions. Equiatomic FeRh undergoes a magnetostructural transition from an antiferromagnetic (AF) to a ferromagnetic (FM) phase above room temperature (∼350–380 K), and hence is considered a very desirable material for the next generation of nanomagnetic or spintronic devices. For this to be realized, we must fully understand the intricate details of the AF to FM transition and associated FM domain growth on the scale of their operation. Here we combine in situ heating with a comprehensive suite of advanced transmission electron microscopy techniques to investigate directly the magnetostructural transition in nanoscale FeRh thin films. Differential phase contrast imaging visualizes the stages of FM domain growth in both cross-sectional and planar FeRh thin films as a function of temperature. Small surface FM signals are also detected due to interfacial strain with the MgO substrate and Fe deficiency after HF etching of the substrate, providing a directional bias for FM domain growth. Our work provides high resolution imaging and quantitative measurements throughout the transition, which were previously inaccessible, and offers fundamental insight into their potential use in magnetic devices

Synthesis of customized petroleum-replica fuel molecules by targeted modification of free fatty acid pools in Escherichia coli.

This is the final version of the article. Available from National Academy of Sciences via the DOI in this record.Data deposition: The synthetic nucleotide sequences reported in this paper have been deposited in GenBank database (accession nos. JQ901708, JQ901709, and JQ901710).Biofuels are the most immediate, practical solution for mitigating dependence on fossil hydrocarbons, but current biofuels (alcohols and biodiesels) require significant downstream processing and are not fully compatible with modern, mass-market internal combustion engines. Rather, the ideal biofuels are structurally and chemically identical to the fossil fuels they seek to replace (i.e., aliphatic n- and iso-alkanes and -alkenes of various chain lengths). Here we report on production of such petroleum-replica hydrocarbons in Escherichia coli. The activity of the fatty acid (FA) reductase complex from Photorhabdus luminescens was coupled with aldehyde decarbonylase from Nostoc punctiforme to use free FAs as substrates for alkane biosynthesis. This combination of genes enabled rational alterations to hydrocarbon chain length (Cn) and the production of branched alkanes through upstream genetic and exogenous manipulations of the FA pool. Genetic components for targeted manipulation of the FA pool included expression of a thioesterase from Cinnamomum camphora (camphor) to alter alkane Cn and expression of the branched-chain α-keto acid dehydrogenase complex and β-keto acyl-acyl carrier protein synthase III from Bacillus subtilis to synthesize branched (iso-) alkanes. Rather than simply reconstituting existing metabolic routes to alkane production found in nature, these results demonstrate the ability to design and implement artificial molecular pathways for the production of renewable, industrially relevant fuel molecules.This work was supported by a grant from Shell Research Ltd. and a Biotechnology and Biological Sciences Research Council (BBSRC) Industry Interchange Partnership grant (to J.L.)

Observation of An Evolving Magnetic Flux Rope Prior To and During A Solar Eruption

Explosive energy release is a common phenomenon occurring in magnetized plasma systems ranging from laboratories, Earth's magnetosphere, the solar corona and astrophysical environments. Its physical explanation is usually attributed to magnetic reconnection in a thin current sheet. Here we report the important role of magnetic flux rope structure, a volumetric current channel, in producing explosive events. The flux rope is observed as a hot channel prior to and during a solar eruption from the Atmospheric Imaging Assembly (AIA) telescope on board the Solar Dynamic Observatory (SDO). It initially appears as a twisted and writhed sigmoidal structure with a temperature as high as 10 MK and then transforms toward a semi-circular shape during a slow rise phase, which is followed by fast acceleration and onset of a flare. The observations suggest that the instability of the magnetic flux rope trigger the eruption, thus making a major addition to the traditional magnetic-reconnection paradigm.Comment: 13 pages, 3 figure

A Noise Trimming and Positional Significance of Transposon Insertion System to Identify Essential Genes in Yersinia pestis

This is the final version of the article. Available from Springer Nature via the DOI in this record.Massively parallel sequencing technology coupled with saturation mutagenesis has provided new and global insights into gene functions and roles. At a simplistic level, the frequency of mutations within genes can indicate the degree of essentiality. However, this approach neglects to take account of the positional significance of mutations - the function of a gene is less likely to be disrupted by a mutation close to the distal ends. Therefore, a systematic bioinformatics approach to improve the reliability of essential gene identification is desirable. We report here a parametric model which introduces a novel mutation feature together with a noise trimming approach to predict the biological significance of Tn5 mutations. We show improved performance of essential gene prediction in the bacterium Yersinia pestis, the causative agent of plague. This method would have broad applicability to other organisms and to the identification of genes which are essential for competitiveness or survival under a broad range of stresses.This work was supported by the Defence Science and Technology Laboratory under contract DSTLX-1000060221 (WP1)

An integrated computational-experimental approach reveals Yersinia pestis genes essential across a narrow or a broad range of environmental conditions

This is the final version. Available from BMC via the DOI in this recordAvailability of data and materials: The datasets supporting the conclusions of this article are available at the NCBI GEO website https://www.ncbi.nlm.nih.gov/geo/query/acc.cgi?acc=GSE100226.BACKGROUND: The World Health Organization has categorized plague as a re-emerging disease and the potential for Yersinia pestis to also be used as a bioweapon makes the identification of new drug targets against this pathogen a priority. Environmental temperature is a key signal which regulates virulence of the bacterium. The bacterium normally grows outside the human host at 28 °C. Therefore, understanding the mechanisms that the bacterium used to adapt to a mammalian host at 37 °C is central to the development of vaccines or drugs for the prevention or treatment of human disease. RESULTS: Using a library of over 1 million Y. pestis CO92 random mutants and transposon-directed insertion site sequencing, we identified 530 essential genes when the bacteria were cultured at 28 °C. When the library of mutants was subsequently cultured at 37 °C we identified 19 genes that were essential at 37 °C but not at 28 °C, including genes which encode proteins that play a role in enabling functioning of the type III secretion and in DNA replication and maintenance. Using genome-scale metabolic network reconstruction we showed that growth conditions profoundly influence the physiology of the bacterium, and by combining computational and experimental approaches we were able to identify 54 genes that are essential under a broad range of conditions. CONCLUSIONS: Using an integrated computational-experimental approach we identify genes which are required for growth at 37 °C and under a broad range of environments may be the best targets for the development of new interventions to prevent or treat plague in humans.This work was funded by the Defence Science and Technology Laboratory, award DSTLX-1000060221 (WP1)

Mathematical Evaluation of Community Level Impact of Combining Bed Nets and Indoor Residual Spraying upon Malaria Transmission in Areas where the main Vectors are Anopheles Arabiensis Mosquitoes.

Indoor residual insecticide spraying (IRS) and long-lasting insecticide treated nets (LLINs) are commonly used together even though evidence that such combinations confer greater protection against malaria than either method alone is inconsistent. A deterministic model of mosquito life cycle processes was adapted to allow parameterization with results from experimental hut trials of various combinations of untreated nets or LLINs (Olyset, PermaNet 2.0, Icon Life nets) with IRS (pirimiphos methyl, lambda cyhalothrin, DDT), in a setting where vector populations are dominated by Anopheles arabiensis, so that community level impact upon malaria transmission at high coverage could be predicted. Intact untreated nets alone provide equivalent personal protection to all three LLINs. Relative to IRS plus untreated nets, community level protection is slightly higher when Olyset or PermaNet 2.0 nets are added onto IRS with pirimiphos methyl or lambda cyhalothrin but not DDT, and when Icon Life nets supplement any of the IRS insecticides. Adding IRS onto any net modestly enhances communal protection when pirimiphos methyl is sprayed, while spraying lambda cyhalothrin enhances protection for untreated nets but not LLINs. Addition of DDT reduces communal protection when added to LLINs. Where transmission is mediated primarily by An. arabiensis, adding IRS to high LLIN coverage provides only modest incremental benefit (e.g. when an organophosphate like pirimiphos methyl is used), but can be redundant (e.g. when a pyrethroid like lambda cyhalothin is used) or even regressive (e.g. when DDT is used for the IRS). Relative to IRS plus untreated nets, supplementing IRS with LLINs will only modestly improve community protection. Beyond the physical protection that intact nets provide, additional protection against transmission by An. arabiensis conferred by insecticides will be remarkably small, regardless of whether they are delivered as LLINs or IRS. The insecticidal action of LLINs and IRS probably already approaches their absolute limit of potential impact upon this persistent vector so personal protection of nets should be enhanced by improving the physical integrity and durability. Combining LLINs and non-pyrethroid IRS in residual transmission systems may nevertheless be justified as a means to manage insecticide resistance and prevent potential rebound of not only An. arabiensis, but also more potent, vulnerable and historically important species such as Anopheles gambiae and Anopheles funestus