Idealized Slab Plasma approach for the study of Warm Dense Matter

Recently, warm dense matter (WDM) has emerged as an interdisciplinary field that draws increasing interest in plasma physics, condensed matter physics, high pressure science, astrophysics, inertial confinement fusion, as well as materials science under extreme conditions. To allow the study of well-defined WDM states, we have introduced the concept of idealized-slab plasmas that can be realized in the laboratory via (i) the isochoric heating of a solid and (ii) the propagation of a shock wave in a solid. The application of this concept provides new means for probing the dynamic conductivity, equation of state, ionization and opacity. These approaches are presented here using results derived from first-principles (density-functional type) theory, Thomas-Fermi type theory, and numerical simulations.Comment: 37 pages, 21 figures, available, pdf file only. To appear in: Laser and Particle beams. To appear more or less in this form in Laser and Particle beam

Dielectric spectroscopy study of thermally-aged extruded model power cables

“Model” extruded power cables, having a much reduced geometry but using the same extrusion techniques and materials as full-sized cables, have been examined using dielectric spectroscopy techniques to study their thermal ageing effects. Cables insulated with homo-polymer XLPE and co-polymer of XLPE with micron-sized ethylene-butyl-acrylate (EBA) islands were studied by both frequency-domain and time-domain dielectric spectroscopy techniques after accelerated thermal ageing under 135°C for 60 days. In the frequency domain, a frequency response analyzer (FRA) was used to measure the frequency range from 10-4Hz to 1Hz at temperatures from 20°C to 80°C. In the time domain, a special charging/discharging current measurement system was developed to measure the frequencies from 10-1Hz to 102Hz. These techniques were chosen to cope with the extremely low dielectric losses of the model cables. The results are compared with those from new model power cables that were degassed at 80°C for 5 days. Thermal ageing was found to increase the low-frequency conductivity, permittivity and the discharging current. Both homo- and co-polymer cables have substantial increase of dielectric loss after ageing

Multi-scale acoustics of partially open cell poroelastic foams

International audienceThe present paper reports on the modeling of linear elastic properties of acoustically insulating foams with unit cells containing solid films or membranes at the junction between interconnected pores from a numerical homogenization technique. It combines fluid-flow induced microstructure identification with simulations of the effective Young's modulus and Poisson ratio from a mixture of routinely available laboratory measurements (porosity, permeability, cell size) and finite element calculations when the boundary conditions of the periodic unit cell take particular symmetric forms. This combination results in microstructural determination of the macroscopic coefficients entering into the Biot-Allard theory of wave propagation and dissipation through porous media. Precise control over pore morphology and mechanical properties of the base material renders this multi-scale approach particularly suitable for various advanced applications

The Equation of State and the Hugoniot of Laser Shock-Compressed Deuterium

The equation of state and the shock Hugoniot of deuterium are calculated using a first-principles approach, for the conditions of the recent shock experiments. We use density functional theory within a classical mapping of the quantum fluids [ Phys. Rev. Letters, {\bf 84}, 959 (2000) ]. The calculated Hugoniot is close to the Path-Integral Monte Carlo (PIMC) result. We also consider the {\it quasi-equilibrium} two-temperature case where the Deuterons are hotter than the electrons; the resulting quasi-equilibrium Hugoniot mimics the laser-shock data. The increased compressibility arises from hot $D^+-e$ pairs occuring close to the zero of the electron chemical potential.Comment: Four pages; One Revtex manuscript, two postscipt figures; submitted to PR

Effect of polydispersity on the transport and sound absorbing properties of three-dimensional random fibrous structures

Sophisticated numerical approaches can predict the properties of composite nonwovens. However, for polydisperse random fibrous media, we need to identify microstructural descriptors for accurate predictions. We manufactured polydisperse composite felts with different fibrous structures and characterized them using scanning electron microscope images. The images showed a wide distribution of fiber diameters and a decreasing standard deviation of the azimuthal angle of fibers with increasing compression rate. Current models could not capture the evolution of their transport properties with compression rate. Therefore, we developed a fiber network model for the transport processes of transversely isotropic random fibrous media. The model relates the main visco-thermal dissipation mechanisms to the largest channels within the fluid phase, while the smallest channels lead the inertial behaviors. We estimated the viscous and thermal permeabilities from a representative elementary volume (REV) with a volume weighted average diameter, and the viscous and thermal characteristic lengths from a REV with inverse volume weighted average diameter. A unified empirical model was proposed. The model predictions agree with the experimental results.Comment: 29 pages, 19 figure

Measurement of forward neutral pion transverse momentum spectra for s\sqrt{s} = 7TeV proton-proton collisions at LHC

The inclusive production rate of neutral pions in the rapidity range greater than $y=8.9$ has been measured by the Large Hadron Collider forward (LHCf) experiment during LHC $\sqrt{s}=7$\,TeV proton-proton collision operation in early 2010. This paper presents the transverse momentum spectra of the neutral pions. The spectra from two independent LHCf detectors are consistent with each other and serve as a cross check of the data. The transverse momentum spectra are also compared with the predictions of several hadronic interaction models that are often used for high energy particle physics and for modeling ultra-high-energy cosmic-ray showers.Comment: 18 Pages, 10 figures, submitted to Phys. Rev.

The performance of the LHCf detector for hadronic showers

The Large Hadron Collider forward (LHCf) experiment has been designed to use the LHC to benchmark the hadronic interaction models used in cosmic-ray physics. The LHCf experiment measures neutral particles emitted in the very forward region of LHC collisions. In this paper, the performances of the LHCf detectors for hadronic showers was studied with MC simulations and beam tests. The detection efficiency for neutrons is from 60% to 70% above 500 GeV. The energy resolutions are about 40% and the position resolution is 0.1 to 1.3mm depend on the incident energy for neutrons. The energy scale determined by the MC simulations and the validity of the MC simulations were examined using 350 GeV proton beams at the CERN-SPS.Comment: 15pages, 19 figure

An exchange-correlation energy for a two-dimensional electron gas in a magnetic field

We present the results of a variational Monte Carlo calculation of the exchange-correlation energy for a spin-polarized two-dimensional electron gas in a perpendicular magnetic field. These energies are a necessary input to the recently developed current-density functional theory. Landau-level mixing is included in a variational manner, which gives the energy at finite density at finite field, in contrast to previous approaches. Results are presented for the exchange-correlation energy and excited-state gap at $\nu =$ 1/7, 1/5, 1/3, 1, and 2. We parameterize the results as a function of $r_s$ and $\nu$ in a form convenient for current-density functional calculations.Comment: 36 pages, including 6 postscript figure

Three-dimensional lattice-Boltzmann simulations of critical spinodal decomposition in binary immiscible fluids

We use a modified Shan-Chen, noiseless lattice-BGK model for binary immiscible, incompressible, athermal fluids in three dimensions to simulate the coarsening of domains following a deep quench below the spinodal point from a symmetric and homogeneous mixture into a two-phase configuration. We find the average domain size growing with time as $t^\gamma$, where $\gamma$ increases in the range $0.545 < \gamma < 0.717$, consistent with a crossover between diffusive $t^{1/3}$ and hydrodynamic viscous, $t^{1.0}$, behaviour. We find good collapse onto a single scaling function, yet the domain growth exponents differ from others' works' for similar values of the unique characteristic length and time that can be constructed out of the fluid's parameters. This rebuts claims of universality for the dynamical scaling hypothesis. At early times, we also find a crossover from $q^2$ to $q^4$ in the scaled structure function, which disappears when the dynamical scaling reasonably improves at later times. This excludes noise as the cause for a $q^2$ behaviour, as proposed by others. We also observe exponential temporal growth of the structure function during the initial stages of the dynamics and for wavenumbers less than a threshold value.Comment: 45 pages, 18 figures. Accepted for publication in Physical Review

Measurement of zero degree single photon energy spectra for sqrt(s) = 7TeV proton-proton collisions at LHC

In early 2010, the Large Hadron Collider forward (LHCf) experiment measured very forward neutral particle spectra in LHC proton-proton collisions. From a limited data set taken under the best beam conditions (low beam-gas background and low occurance of pile-up events), the single photon spectra at sqrt(s)=7TeV and pseudo-rapidity (eta) ranges from 8.81 to 8.99 and from 10.94 to infinity were obtained for the first time and are reported in this paper. The spectra from two independent LHCf detectors are consistent with one another and serve as a cross check of the data. The photon spectra are also compared with the predictions of several hadron interaction models that are used extensively for modeling ultra high energy cosmic ray showers. Despite conservative estimates for the systematic errors, none of the models agree perfectly with the measurements. A notable difference is found between the data and the DPMJET 3.04 and PYTHIA 8.145 hadron interaction models above 2TeV where the models predict higher photon yield than the data. The QGSJET II-03 model predicts overall lower photon yield than the data, especially above 2TeV in the rapidity range 8.81<eta<8.99