A Graphene Surface Force Balance

We report a method for transferring graphene, grown by chemical vapor deposition, which produces ultraflat graphene surfaces (root-mean-square roughness of 0.19 nm) free from polymer residues over macroscopic areas (>1 cm2). The critical step in preparing such surfaces involves the use of an intermediate mica template, which itself is atomically smooth. We demonstrate the compatibility of these model surfaces with the surface force balance, opening up the possibility of measuring normal and lateral forces, including friction and adhesion, between two graphene sheets either in contact or across a liquid medium. The conductivity of the graphene surfaces allows forces to be measured while controlling the surface potential. This new apparatus, the graphene surface force balance, is expected to be of importance to the future understanding of graphene in applications from lubrication to electrochemical energy storage systems

Effects of temperature and ammonia flow rate on the chemical vapour deposition growth of nitrogen-doped graphene

We doped graphene in situ during synthesis from methane and ammonia on copper in a low-pressure chemical vapour deposition system, and investigated the effect of the synthesis temperature and ammonia concentration on the growth. Raman and X-ray photoelectron spectroscopy was used to investigate the quality and nitrogen content of the graphene and demonstrated that decreasing the synthesis temperature and increasing the ammonia flow rate results in an increase in the concentration of nitrogen dopants up to ca. 2.1% overall. However, concurrent scanning electron microscopy studies demonstrate that decreasing both the growth temperature from 1000 to 900 1C and increasing the N/C precursor ratio from 1/50 to 1/10 significantly decreased the growth rate by a factor of six overall. Using scanning tunnelling microscopy we show that the nitrogen was incorporated mainly in substitutional configuration, while current imaging tunnelling spectroscopy showed that the effect of the nitrogen on the density of states was visible only over a few atom distances

Synthesis and characterization of new polyaniline/nanotube composites

New polyaniline/nanotube (PANI/NT) composites have been synthesized by “in situ” polymerization processes using both multi-wall carbon nanotubes (MWNTs) and single-wall carbon nanotubes (SWNTs) in concentrations ranging from 2 to 50 wt.%. Although no structural changes are observed using MWNTs above a concentration of 20 wt.%, the in situ synthesis results in electronic interactions between nanotubes and the quinoid ring of PANI leading to enhanced electronic properties and thus to the formation of a genuine PANI/MWNT composite material. On the other hand, using SWNTs favors the formation of inhomogeneous mixtures rather than of a homogeneous composite materials, independent of the SWNT concentration. X-ray diffraction, Raman and transport measurements show the different behavior of both classes of nanotubes in PANI/NT materials. The difficulties in the formation of a true PANI/SWNT composite are related to the far more complex structure of the SWNT material itself, i.e. to the presence of entangled bundles of SWNTs, amorphous carbon and even catalytic metal particles.This work was supported by the EC RTN contract NANOCOMP (HPRN-CT-2000-00037).Peer reviewe

Covalently bonded three-dimensional carbon nanotube solids via boron induced nanojunctions

The establishment of covalent junctions between carbon nanotubes (CNTs) and the modification of their straight tubular morphology are two strategies needed to successfully synthesize nanotube-based three-dimensional (3D) frameworks exhibiting superior material properties. Engineering such 3D structures in scalable synthetic processes still remains a challenge. This work pioneers the bulk synthesis of 3D macroscale nanotube elastic solids directly via a boron-doping strategy during chemical vapour deposition, which influences the formation of atomic-scale “elbow” junctions and nanotube covalent interconnections. Detailed elemental analysis revealed that the “elbow” junctions are preferred sites for excess boron atoms, indicating the role of boron and curvature in the junction formation mechanism, in agreement with our first principle theoretical calculations. Exploiting this material’s ultra-light weight, super-hydrophobicity, high porosity, thermal stability, and mechanical flexibility, the strongly oleophilic sponge-like solids are demonstrated as unique reusable sorbent scaffolds able to efficiently remove oil from contaminated seawater even after repeated use

Psychometric properties of the Alcohol Use Disorders Identification Test (AUDIT) across cross-cultural subgroups, genders, and sexual orientations: Findings from the International Sex Survey (ISS)

© 2023 The Authors. Published by Elsevier Inc. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/bync-nd/4.0/).INTRODUCTION: Despite being a widely used screening questionnaire, there is no consensus on the most appropriate measurement model for the Alcohol Use Disorders Identification Test (AUDIT). Furthermore, there have been limited studies on its measurement invariance across cross-cultural subgroups, genders, and sexual orientations. AIMS: The present study aimed to examine the fit of different measurement models for the AUDIT and its measurement invariance across a wide range of subgroups by country, language, gender, and sexual orientation. METHODS: Responses concerning past-year alcohol use from the participants of the cross-sectional International Sex Survey were considered (N = 62,943; M age: 32.73; SD = 12.59). Confirmatory factor analysis, as well as measurement invariance tests were performed for 21 countries, 14 languages, three genders, and four sexual-orientation subgroups that met the minimum sample size requirement for inclusion in these analyses. RESULTS: A two-factor model with factors describing 'alcohol use' (items 1-3) and 'alcohol problems' (items 4-10) showed the best model fit across countries, languages, genders, and sexual orientations. For the former two, scalar and latent mean levels of invariance were reached considering different criteria. For gender and sexual orientation, a latent mean level of invariance was reached. CONCLUSIONS: In line with the two-factor model, the calculation of separate alcohol-use and alcohol-problem scores is recommended when using the AUDIT. The high levels of measurement invariance achieved for the AUDIT support its use in cross-cultural research, capable also of meaningful comparisons among genders and sexual orientations.Peer reviewe

Psychometric properties of the Alcohol Use Disorders Identification Test (AUDIT) across cross-cultural subgroups, genders, and sexual orientations: Findings from the International Sex Survey (ISS)

Introduction. Despite being a widely used screening questionnaire, there is no consensus on the most appropriate measurement model for the Alcohol Use Disorders Identification Test (AUDIT). Furthermore, there have been limited studies on its measurement invariance across cross-cultural subgroups, genders, and sexual orientations. Aims. The present study aimed to examine the fit of different measurement models for the AUDIT and its measurement invariance across a wide range of subgroups by country, language, gender, and sexual orientation. Methods. Responses concerning past-year alcohol use from the participants of the cross-sectional International Sex Survey were considered (N = 62,943; Mage: 32.73; SD = 12.59). Confirmatory factor analysis, as well as measurement invariance tests were performed for 21 countries, 14 languages, three genders, and four sexual-orientation subgroups that met the minimum sample size requirement for inclusion in these analyses. Results. A two-factor model with factors describing ‘alcohol use’ (items 1–3) and ‘alcohol problems’ (items 4–10) showed the best model fit across countries, languages, genders, and sexual orientations. For the former two, scalar and latent mean levels of invariance were reached considering different criteria. For gender and sexual orientation, a latent mean level of invariance was reached. Conclusions. In line with the two-factor model, the calculation of separate alcohol-use and alcohol-problem scores is recommended when using the AUDIT. The high levels of measurement invariance achieved for the AUDIT support its use in cross-cultural research, capable also of meaningful comparisons among genders and sexual orientations

The short version of the Sexual Distress Scale (SDS-3): Measurement invariance across countries, gender identities, and sexual orientations

© 2024 The Author(s). Published by Elsevier B.V. This is an open-access article distributed under the terms of the Creative Commons Attribution-Non Commercial 4.0 International License (CC BY-NC), https://creativecommons.org/licenses/by-nc/4.0/Background The three-item Sexual Distress Scale (SDS-3) has been frequently used to assess distress related to sexuality in public health surveys and research on sexual wellbeing. However, its psychometric properties and measurement invariance across cultural, gender and sexual subgroups have not yet been examined. This multinational study aimed to validate the SDS-3 and test its psychometric properties, including measurement invariance across language, country, gender identity, and sexual orientation groups. Methods We used global survey data from 82,243 individuals (Mean age=32.39 years; 40.3 % men, 57.0 % women, 2.8 % non-binary, and 0.6 % other genders) participating in the International Sexual Survey (ISS; https://internationalsexsurvey.org/) across 42 countries and 26 languages. Participants completed the SDS-3, as well as questions regarding sociodemographic characteristics, including gender identity and sexual orientation. Results Confirmatory factor analysis (CFA) supported a unidimensional factor structure for the SDS-3, and multi-group CFA (MGCFA) suggested that this factor structure was invariant across countries, languages, gender identities, and sexual orientations. Cronbach's α for the unidimensional score was 0.83 (range between 0.76 and 0.89), and McDonald's ω was 0.84 (range between 0.76 and 0.90). Participants who did not experience sexual problems had significantly lower SDS-3 total scores (M = 2.99; SD=2.54) compared to those who reported sexual problems (M = 5.60; SD=3.00), with a large effect size (Cohen's d = 1.01 [95 % CI=-1.03, -0.98]; p < 0.001). Conclusion The SDS-3 has a unidimensional factor structure and appears to be valid and reliable for measuring sexual distress among individuals from different countries, gender identities, and sexual orientations.Peer reviewe

Compulsive Sexual Behavior Disorder in 42 Countries: Insights from the International Sex Survey and Introduction of Standardized Assessment Tools

Background and aims: Despite its inclusion in the 11th revision of the International Classification of Diseases, there is a virtual paucity of high-quality scientific evidence about compulsive sexual behavior disorder (CSBD), especially in underrepresented and underserved populations. Therefore, we comprehensively examined CSBD across 42 countries, genders, and sexual orientations, and validated the original (CSBD-19) and short (CSBD-7) versions of the Compulsive Sexual Behavior Disorder Scale to provide stan- dardized, state-of-the-art screening tools for research and clinical practice. Method: Using data from the International Sex Survey (N 5 82,243; Mage 5 32.39 years, SD 5 12.52), we evaluated the psychometric properties of the CSBD-19 and CSBD-7 and compared CSBD across 42 countries, three genders, eight sexual orientations, and individuals with low vs. high risk of experiencing CSBD. Results: A total of 4.8% of the participants were at high risk of experiencing CSBD. Country- and gender-based differences were observed, while no sexual-orientation-based differences were pre- sent in CSBD levels. Only 14% of individuals with CSBD have ever sought treatment for this disorder, with an additional 33% not having sought treatment because of various reasons. Both versions of the scale demonstrated excellent validity and reliability. Discus- sion and conclusions: This study contributes to a better under- standing of CSBD in underrepresented and underserved populations and facilitates its identification in diverse populations by providing freely accessible ICD-11-based screening tools in 26 languages. The findings may also serve as a crucial building block to stimulate research into evidence-based, culturally sensitive pre- vention and intervention strategies for CSBD that are currently missing from the literature