Swimming performance in juvenile shortnose sturgeon (Acipenser brevirostrum): the influence of time interval and velocity increments on critical swimming tests

The most utilized method to measure swimming performance of fishes has been the critical swimming speed (UCrit) test. In this test, the fish is forced to swim against an incrementally increasing flow of water until fatigue. Before the water velocity is increased, the fish swims at the water velocity for a specific, pre-arranged time interval. The magnitude of the velocity increments and the time interval for each swimming period can vary across studies making the comparison between and within species difficult. This issue has been acknowledged in the literature, however, little empirical evidence exists that tests the importance of velocity and time increments on swimming performance in fish. A practical application for fish performance is through the design of fishways that enable fish to bypass anthropogenic structures (e. g. dams) that block migration routes, which is one of the causes of world-wide decline in sturgeon populations. While fishways will improve sturgeon conservation, they need to be specifically designed to accommodate the swimming capabilities specific for sturgeons, and it is possible that current swimming methodologies have under-estimated the swimming performance of sturgeons. The present study assessed the UCrit of shortnose sturgeon using modified UCrit to determine the importance of velocity increment (5 and 10 cm s(-1)) and time (5, 15 and 30 min) intervals on swimming performance. UCrit was found to be influenced by both time interval and water velocity. UCrit was generally lower in sturgeon when they were swum using 5cm s(-1) compared with 10 cm s(-1) increments. Velocity increment influences the UCrit more than time interval. Overall, researchers must consider the impacts of using particular swimming criteria when designing their experiments

Association between health insurance literacy and avoidance of health care services owing to cost

Importance: Navigating health insurance and health care choices requires considerable health insurance literacy. Although recommended preventive services are exempt from out-of-pocket costs under the Affordable Care Act, many people may remain unaware of this provision and its effect on their required payment. Little is known about the association between individuals\u27 health insurance literacy and their use of preventive or nonpreventive health care services. Objective: To assess the association between health insurance literacy and self-reported avoidance of health care services owing to cost. Design, Setting, and Participants: In this survey study, a US national, geographically diverse, nonprobability sample of 506 US residents aged 18 years or older with current health insurance coverage was recruited to participate in an online survey between February 22 and 23, 2016. Main Outcomes and Measures: The validated 21-item Health Insurance Literacy Measure (HILM) assessed individuals\u27 self-rated confidence in selecting and using health insurance (score range, 0-84, with higher scores indicating greater levels of health insurance literacy). Dependent variables included delayed or foregone preventive and nonpreventive services in the past 12 months owing to perceived costs, and preventive and nonpreventive use of services. Covariates included age, sex, race/ethnicity, income, educational level, high-deductible health insurance plan, health literacy, numeracy, and chronic health conditions. Analyses included descriptive statistics and bivariate and multivariable logistic regression. Results: A total of 506 of 511 participants who began the survey completed it (participation rate, 99.0%). Of the 506 participants, 339 (67.0%) were younger than 35 years (mean [SD] age, 34 [10.4] years), 228 (45.1%) were women, 406 of 504 who reported race (80.6%) were white, and 245 (48.4%) attended college for 4 or more years. A total of 228 participants (45.1%) had 1 or more chronic health condition, 361 of 500 (72.2%) who responded to the survey item had seen a physician in the outpatient setting in the past 12 months, and 446 of the 501 (89.0%) who responded to the survey item had their health insurance plan for 12 or more months. One hundred fifty respondents (29.6%) reported having delayed or foregone care because of cost. The mean (SD) HILM score was 63.5 (12.3). In multivariable logistic regression, each 12-point increase in HILM score was associated with a lower likelihood of both delayed or foregone preventive care (adjusted odds ratio [aOR], 0.61; 95% CI, 0.48-0.78) and delayed or foregone nonpreventive care (aOR, 0.71; 95% CI, 0.55-0.91). Conclusions and Relevance: This study\u27s findings suggest that lower health insurance literacy may be associated with greater avoidance of both preventive and nonpreventive services. It appears that to improve appropriate use of recommended health care services, including preventive health services, clinicians, health plans, and policymakers may need to communicate health insurance concepts in accessible ways regardless of individuals\u27 health insurance literacy. Plain language communication may be able to improve patients\u27 understanding of services exempt from out-of-pocket costs

Stress-Minimizing Orthogonal Layout of Data Flow Diagrams with Ports

We present a fundamentally different approach to orthogonal layout of data flow diagrams with ports. This is based on extending constrained stress majorization to cater for ports and flow layout. Because we are minimizing stress we are able to better display global structure, as measured by several criteria such as stress, edge-length variance, and aspect ratio. Compared to the layered approach, our layouts tend to exhibit symmetries, and eliminate inter-layer whitespace, making the diagrams more compact

Six-week Pilates Program Improved Postural Stability, Balance, and Isometric Back Strength in College-aged Athletes

Please download pdf version here

Low-velocity impact craters in ice and ice-saturated sand with implications for Martian crater count ages

We produced a series of decimeter-sized impact craters in blocks of ice near 0°C and −70°C and in ice-saturated sand near −70°C as a preliminary investigation of cratering in materials analogous to those found on Mars and the outer solar system satellites. The projectiles used were standard 0.22 and 0.30 caliber bullets fired at velocities between 0.3 and 1.5 km/s, with kinetic energies at impact between 10^9 and 4×10^(10) ergs. Crater diameters in the ice-saturated sand were ∼2 times larger than craters in the same energy and velocity range in competent blocks of granite, basalt and cement. Craters in ice were ∼3 times larger. If this dependence of crater size on strength persists to large hypervelocity impact craters, then surfaces of geologic units composed of ice or ice-saturated soil would have greater crater count ages than rocky surfaces with identical influx histories. The magnitude of the correction to crater counts required by this strength effect is comparable to the magnitudes of corrections required by variations in impact velocity and surface gravity used in determining relative interplanetary chronologies. The relative sizes of craters in ice and ice-saturated sand imply that the tensile strength of ice-saturated sand is a strong inverse function of temperature. If this is true, then Martian impact crater energy versus diameter scaling may also be a function of latitude

Ion-matter interactions by MD simulations making use of reactive force fields

In the field of SIMS, ion-matter interactions have been largely investigated by numerical simulations like TRIM (or other programs using the binary-collision approximation) or molecular dynamics (MD) simulations. For MD simulations related to inorganic samples, mostly classical force fields assuming stable bonding structure have been used. In materials science, level-three force fields capable of simulating the breaking and formation of chemical bonds have recently been conceived. One such force field has been developed by Kieffer et al. 1–4 This potential includes directional covalent bonds, Coulomb and dipolar interaction terms, dispersion terms, etc. Important features of this force field for simulating systems that undergo significant structural reorganization are: (i) the ability to account for the redistribution of electron density upon ionization, formation, or breaking of bonds, through a charge transfer term; and (ii) the fact that the angular constraints dynamically adjust when a change in the coordination number of an atom occurs. In this work, we will present preliminary results of this potential, parameterized for silicon, for the simulation of atomic trajectories in samples subject to ion bombardment. Compared to normal force fields, ion-matter interactions as well as the sputtering of matter are expected to be described more accurately, especially when using reactive primary ions (oxygen or cesium) at low-impact energies. Copyright © 2010 John Wiley & Sons, Ltd.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/79412/1/3427_ftp.pd

Generation of broad XUV continuous high harmonic spectra and isolated attosecond pulses with intense mid-infrared lasers

We present experimental results showing the appearance of a near-continuum in the high-order harmonic generation (HHG) spectra of atomic and molecular species as the driving laser intensity of an infrared pulse increases. Detailed macroscopic simulations reveal that these near-continuum spectra are capable of producing IAPs in the far field if a proper spatial filter is applied. Further, our simulations show that the near-continuum spectra and the IAPs are a product of strong temporal and spatial reshaping (blue shift and defocusing) of the driving field. This offers a possibility of producing IAPs with a broad range of photon energy, including plateau harmonics, by mid-IR laser pulses even without carrier-envelope phase stabilization.Comment: 7 pages, 5 figures, submitted to J.Phys. B (Oct 2011

The Caffeine Dose Response in Habitual Consumers Performing a Maximal Anaerobic Test

Please view abstract in the attached PDF fil

Thermal Infrared Imaging Experiments of C-Type Asteroid 162173 Ryugu on Hayabusa2

The thermal infrared imager TIR onboard Hayabusa2 has been developed to investigate thermo-physical properties of C-type, near-Earth asteroid 162173 Ryugu. TIR is one of the remote science instruments on Hayabusa2 designed to understand the nature of a volatile-rich solar system small body, but it also has significant mission objectives to provide information on surface physical properties and conditions for sampling site selection as well as the assessment of safe landing operations. TIR is based on a two-dimensional uncooled micro-bolometer array inherited from the Longwave Infrared Camera LIR on Akatsuki (Fukuhara et al., 2011). TIR takes images of thermal infrared emission in 8 to 12 μm with a field of view of 16×12∘ and a spatial resolution of 0.05∘ per pixel. TIR covers the temperature range from 150 to 460 K, including the well calibrated range from 230 to 420 K. Temperature accuracy is within 2 K or better for summed images, and the relative accuracy or noise equivalent temperature difference (NETD) at each of pixels is 0.4 K or lower for the well-calibrated temperature range. TIR takes a couple of images with shutter open and closed, the corresponding dark frame, and provides a true thermal image by dark frame subtraction. Data processing involves summation of multiple images, image processing including the StarPixel compression (Hihara et al., 2014), and transfer to the data recorder in the spacecraft digital electronics (DE). We report the scientific and mission objectives of TIR, the requirements and constraints for the instrument specifications, the designed instrumentation and the pre-flight and in-flight performances of TIR, as well as its observation plan during the Hayabusa2 mission

Quadratic optimal functional quantization of stochastic processes and numerical applications

In this paper, we present an overview of the recent developments of functional quantization of stochastic processes, with an emphasis on the quadratic case. Functional quantization is a way to approximate a process, viewed as a Hilbert-valued random variable, using a nearest neighbour projection on a finite codebook. A special emphasis is made on the computational aspects and the numerical applications, in particular the pricing of some path-dependent European options.Comment: 41 page