Developing fluid flow and heat transfer in a channel partially filled with porous medium

A three-dimensional computational model is developed to analyze fluid flow in a channel partially filled with porous medium. In order to understand the developing fluid flow and heat transfer mechanisms inside the channel partially filled with porous medium, the conventional Navier–Stokes equations for gas channel, and volume-averaged Navier–Stokes equations for porous medium layer are adopted individually in this study. Conservation of mass, momentum and energy equations are solved numerically in a coupled gas and porous media domain along a channel using the vorticity–velocity method with power law scheme. Detailed development of axial velocity, secondary flow and temperature field at various axial positions in the entrance region are presented. The friction factor and Nusselt number are presented as a function of axial position, and the effects of the size of porous media inside the channel partially filled with porous medium are also analyzed in the present study

Comparative study of Hydrogen yield from magnesium waste products in Acetic acid and Iron chloride solution

Abstract: Low-grade magnesium (Mg) waste from post-consumer products and production waste cannot be recycled efficiently and economically. This work addresses this challenge by converting this waste into hydrogen. Hydrogen (H2) offers a wide range of benefits and the greatest of them all is its ability and flexibility to be used as a green energy carrier. In this work Mg waste is re-melted, loaded on one side of a stainless steel and allowed to solidify at room temperature to form a galvanic Mg stainless steel couple. Mg reacts slowly with water and releases hydrogen at room temperature and this is followed by the formation of magnesium hydroxide on its surface. Stainless steel net is considered as a metallic catalyst and two acids as accelerators reacting with the couples separately. A set of couples were used to generate hydrogen in 3.5% by weight acetic acid (CH3COOH). The experimental results show that a mean accumulated H2 volume of 3.17 – 3.21 litres was produced in 3600 seconds. Another set of couples produced H2 in 1.5 wt. % of iron chloride (FeCl3). The results confirmed FeCl3 as an excellent hydrolysis reaction accelerator with stainless steel as an effective catalyst. On average, the reaction yielded 2700mL of H2 over 3600 seconds which appear to be substantially higher than the litres achieve when CH3COOH was considered as an accelerator

Conceptualization of the optimal design of a hydroxyl booster dry cell for enhancing efficiency of internal combustion engines

Abstract: Current internal combustion engines (ICEs) are powered by fossil fuels which create the challenges of low combustion efficiency and the emission of greenhouse gases. This has negatively affected the environment, leading to global warming and climate change. Interim technologies can be implemented to reduce these effects whilst alternative technologies are being explored. This research aimed at selecting the most appropriate geometrical design of a hydroxyl booster dry cell, a device which operates on the principles of electrolysis to produce hydroxyl gas commonly referred to as Brown gas or HHO. When a voltage is applied to a body of water, it splits it into its base components, i.e. hydrogen and oxygen cold plasma, a mixture sometimes referred to as hydroxyl gas. The addition of hydroxyl gas into the combustion chamber of an ICE initiates a more complete combustion due to the explosive and diffusive nature of hydrogen accompanied by the cooling effect of water thus reducing potential for NOx formation. This leads to fuel savings, cost savings and reduced emissions. A rectangular hydroxyl booster dry cell was selected and designed, fabricated and tested for effectiveness. The HHO generator is later connected to the ICE system to check mainly on the positive contributions of this Brown’s gas as HHO is popularly known

Experimental analysis of nanostructured PEEK, African giant snail shell, and sea snail shell powder for hydroxyapatite formation for bone implant applications

This experimental research focuses on the nanostructure analysis of three materials; polyether ether ketone (PEEK), African land giant snail shell (ALGSS), and sea snail shell (SSS) powder, for the formation of hydroxyapatite (HA) coatings in bone implant applications. The study aimed to evaluate these materials’ surface characteristics, furrow depth, density, and other relevant parameters to assess their suitability as bone implant materials. The nanostructure analysis revealed distinct characteristics for each material. PEEK exhibited shallow furrows and a high density of furrows, making it a favourable substrate for hydroxyapatite coating formation. The ISO 25178 roughness analysis further characterised surface roughness and topography. African land giant snail shell powder, displayed a high material ratio, indicating a potential for hydroxyapatite conversion for biomedical application. The sea snail shell powder demonstrated intermediate furrow depth and density, warranting further investigation for optimisation as a precursor for hydroxyapatite coatings. The findings emphasise the significance of nanostructure properties in bone implant materials. The tailored nanostructure of materials such as PEEK, the synthesized powder can influence their biocompatibility, osseointegration, and long-term performance. The novelty of this research lies in the comprehensive analysis of the nanostructure properties of these materials, contributing to the understanding of their potential for bone implant applications. Overall, this experimental research is significant and provides valuable insights into the nanostructure characteristics of PEEK, African land giant snail shell powder, and sea snail shell powder and they all demonstrated the potential of forming hydroxyapatite coatings.</p

An Overview of TIG Welding of Ti6Al4V : Recent Developments

Abstract: Titanium is a commonly used non-ferrous metal in the aerospace, chemical and nuclear industry, due to its unique structural and mechanical properties. Selection of suitable welding techniques and understanding of the effects of parameters corroboration to achieve a quality joint necessitated this article. The article presents recent researches in process parameters optimization done on Tungsten Inert Gas (TIG) welding of Ti6Al4V alloy. Furthermore, it discusses the effects of the parameters used in TIG welding technique on the weld quality, mechanical properties, and microstructure of joined plates. Pulsed TIG welding was found to be the most suitable type of welding for Ti6Al4V alloys based on its ease of use and reduced heat input compared to the conventional TIG welding

Enhancing insecticide activity of anacardic acid by intercalating it into MgAl layered double hydroxides nanoparticles: Research article

MgAl layered double hydroxides nanoparticles (LDHs) are known as the useful materials in agrochemsitry. LDHs can be used as a bio-insecticide carrier to enhance insecticide’s activity efficiency. In our study, to improve the insecticide activity of anacardic acid, an extract from cashew nut shell liquid, we intercalated it MgAl layered double hydroxides nanoparticles. Different hybridization between anacardic acid and LDHs (37, 74, 148, and 296μg/mL) (L-As) were made and tested on the survivals of cutworms (Spodoptera litura). L-As or free anacardic acid was sprayed directly on the leaves mustard to feed cutworms or directly on the skin of cutworms. Our results showed that in all L-As treatments, the worm killing efficiency was higher than the free anacardic acid treatment.Hạt nano lớp đôi hydroxides MgAl (LDHs) được biết đến như là những vật liệu hữu ích trong nông ngành hóa học nông nghiệp. LDHs có thể được dùng như là một loại chất mang cho thuốc trừ sâu sinh học để tăng cường hiệu lực diệt sâu. Trong nghiên cứu này, để tăng cường hiệu lực diệt sâu của anacardic acid, một loại hoạt chất được chiết từ dầu vỏ hạt điều, chúng tôi đã gắn chèn nó lên hạt nano lớp đôi hydroxides MgAl. Các nồng độ khác nhau của dạng lai của anacardic và LDHs (37, 74, 148 và 296μg/mL) (L-As) đã được kiểm tra tỷ lệ sống của ấu trùng sâu khoang (Spodoptera litura). Các nghiệm thức L-As và dạng anacardic acid tự do đã được phun lên lá rau cải ngọt cho ấu trùng sâu ăn hoặc phun trực tiếp lên da ấu trùng sâu. Kết quả cho thấy, tất cả các công thức có xử lý bằng L-As, hiệu lực diệt ấu trùng sâu đều cao hơn so với dạng anacardic acid ở trạng thái tự do

A fast-degrading thiol–acrylate based hydrogel for cranial regeneration

Successful regeneration of the cranium in patients suffering from cranial bone defects is an integral step to restore craniofacial function. However, restoration of craniofacial structure has been challenging due to its complex geometry, limited donor site availability, and poor graft integration. To address these problems, we investigated the use of a thiol–acrylate hydrogel as a cell carrier to facilitate cranial regeneration. Thiol–acrylate hydrogels were formulated with 5–15 wt% poly(ethylene glycol)-diacrylate (PEGDA) and 1–9 mm dithiothreitol (DTT). The degradation rate, swelling ratio, and shear modulus of the resulting hydrogel were first characterized. Then, pre-osteoblast-like cells (MC3T3-E1) were encapsulated in the hydrogel and cultured for up to 21 d. Our results demonstrate that compared to samples formulated from 15 wt% PEGDA, 5 wt% PEGDA samples showed lower storage modulus at day 10 (0.7 kPa versus 8.3 kPa), 62.7% higher in weight change after soaking for 10 d. While the 5 wt% PEGDA group showed an 85% weight loss between day 10 and 21, the 15 wt% PEGDA group showed a 5% weight gain in the same time period. Cell viability with 15 wt% PEGDA and 5 mm DTT hydrogel decreased by 41.3% compared to 5 wt% PEGDA and 5mM DTT gel at day 7. However, histological analysis of cells after 21 d in culture revealed that they had pericellular mineral deposition indicating that the cells were differentiating into osteoblasts lineage in all experimental groups. This study shows that thiol–acrylate hydrogels can be tailored to achieve different degradation rates, in order to enhance cell viability and differentiation. Thus, the findings of this study provide a fundamental understanding for the application of thiol–acrylate hydrogels in cranial bone regeneration

Genome-wide trans-ancestry meta-analysis provides insight into the genetic architecture of type 2 diabetes susceptibility.

To further understanding of the genetic basis of type 2 diabetes (T2D) susceptibility, we aggregated published meta-analyses of genome-wide association studies (GWAS), including 26,488 cases and 83,964 controls of European, east Asian, south Asian and Mexican and Mexican American ancestry. We observed a significant excess in the directional consistency of T2D risk alleles across ancestry groups, even at SNPs demonstrating only weak evidence of association. By following up the strongest signals of association from the trans-ethnic meta-analysis in an additional 21,491 cases and 55,647 controls of European ancestry, we identified seven new T2D susceptibility loci. Furthermore, we observed considerable improvements in the fine-mapping resolution of common variant association signals at several T2D susceptibility loci. These observations highlight the benefits of trans-ethnic GWAS for the discovery and characterization of complex trait loci and emphasize an exciting opportunity to extend insight into the genetic architecture and pathogenesis of human diseases across populations of diverse ancestry

US Cosmic Visions: New Ideas in Dark Matter 2017: Community Report

This white paper summarizes the workshop "U.S. Cosmic Visions: New Ideas in Dark Matter" held at University of Maryland on March 23-25, 2017.Comment: 102 pages + reference