Accelerated post-AGB evolution, initial-final mass relations, and the star-formation history of the Galactic bulge

We study the star-formation history of the Galactic bulge, as derived from the age distribution of the central stars of planetary nebulae that belong to this stellar population. The high resolution imaging and spectroscopic observations of 31 compact planetary nebulae are used to derive their central star masses. The Bloecker tracks with the cluster IFMR result in ages, which are unexpectedly young. We find that the Bloecker post-AGB tracks need to be accelerated by a factor of three to fit the local white dwarf masses. This acceleration extends the age distribution. We adjust the IFMR as a free parameter to map the central star ages on the full age range of bulge stellar populations. This fit requires a steeper IFMR than the cluster relation. We find a star-formation rate in the Galactic bulge, which is approximately constant between 3 and 10 Gyr ago. The result indicates that planetary nebulae are mainly associated with the younger and more metal-rich bulge populations. The constant rate of star-formation between 3 and 10 Gyr agrees with suggestions that the metal-rich component of the bulge is formed during an extended process, such as a bar interaction.Comment: accepted for publication in A&

Disk evaporation in a planetary nebula

We study the Galactic bulge planetary nebula M 2-29 (for which a 3-year eclipse event of the central star has been attributed to a dust disk) using HST imaging and VLT spectroscopy, both long-slit and integral field. The central cavity of M 2-29 is filled with a decreasing, slow wind. An inner high density core is detected, with radius less than 250 AU, interpreted as a rotating gas/dust disk with a bipolar disk wind. The evaporating disk is argued to be the source of the slow wind. The central star is a source of a very fast wind (1000 km/s). An outer, partial ring is seen in the equatorial plane, expanding at 12 km/s. The azimuthal asymmetry is attributed to mass-loss modulation by an eccentric binary. M 2-29 presents a crucial point in disk evolution, where ionization causes the gas to be lost, leaving a low-mass dust disk behind.Comment: 11 pages, accepted for publication in "Astronomy and Astrophysics

Skycorr: A general tool for spectroscopic sky subtraction

Airglow emission lines, which dominate the optical-to-near-IR sky radiation, show strong, line-dependent variability on various time scales. Therefore, the subtraction of the sky background in the affected wavelength regime becomes a problem if plain sky spectra have to be taken at a different time as the astronomical data. A solution of this issue is the physically motivated scaling of the airglow lines in the plain sky data to fit the sky lines in the object spectrum. We have developed a corresponding instrument-independent approach based on one-dimensional spectra. Our code skycorr separates sky lines and sky/object continuum by an iterative approach involving a line finder and airglow line data. The sky lines are grouped according to their expected variability. The line groups in the sky data are then scaled to fit the sky in the science data. Required pixel-specific weights for overlapping groups are taken from a comprehensive airglow model. Deviations in the wavelength calibration are corrected by fitting Chebyshev polynomials and rebinning via asymmetric damped sinc kernels. The scaled sky lines and the sky continuum are subtracted separately. VLT X-Shooter data covering time intervals from two minutes to about one year were selected to illustrate the performance. Except for short time intervals of a few minutes, the sky line residuals were several times weaker than for sky subtraction without fitting. Further tests show that skycorr performs consistently better than the method of Davies (2007) developed for VLT SINFONI data.Comment: 17 pages, 18 figures, accepted for publication in A&

Molecfit: A general tool for telluric absorption correction II. Quantitative evaluation on ESO-VLT X-Shooter spectra

Context: Absorption by molecules in the Earth's atmosphere strongly affects ground-based astronomical observations. The resulting absorption line strength and shape depend on the highly variable physical state of the atmosphere, i.e. pressure, temperature, and mixing ratio of the different molecules involved. Usually, supplementary observations of so-called telluric standard stars (TSS) are needed to correct for this effect, which is expensive in terms of telescope time. We have developed the software package molecfit to provide synthetic transmission spectra based on parameters obtained by fitting narrow ranges of the observed spectra of scientific objects. These spectra are calculated by means of the radiative transfer code LBLRTM and an atmospheric model. In this way, the telluric absorption correction for suitable objects can be performed without any additional calibration observations of TSS. Aims: We evaluate the quality of the telluric absorption correction using molecfit with a set of archival ESO-VLT X-Shooter visible and near-infrared spectra. Methods: Thanks to the wavelength coverage from the U to the K band, X-Shooter is well suited to investigate the quality of the telluric absorption correction with respect to the observing conditions, the instrumental set-up, input parameters of the code, the signal-to-noise of the input spectrum, and the atmospheric profiles. These investigations are based on two figures of merit, I_off and I_res, that describe the systematic offsets and the remaining small-scale residuals of the corrections. We also compare the quality of the telluric absorption correction achieved with moelcfit to the classical method based on a telluric standard star. (Abridged)Comment: Acc. by A&A; Software available via ESO: http://www.eso.org/sci/software/pipelines/skytools

Are planetary nebulae derived from multiple evolutionary scenarios?

Our understanding of planetary nebulae has been significantly enhanced as a result of several recent large surveys (Parker et al., these proceedings). These new discoveries suggest that the `PN phenomenon' is in fact more heterogeneous than previously envisaged. Even after the careful elimination of mimics from Galactic PN catalogues, there remains a surprising diversity in the population of PNe and especially their central stars. Indeed, several evolutionary scenarios are implicated in the formation of objects presently catalogued as PNe. We provide a summary of these evolutionary pathways and give examples of each. Eventually, a full census of local PNe can be used to confront both stellar evolution theory and population synthesis models.Comment: 4 pages, 1 figure. To be published in Planetary Nebulae: an Eye to the Future, Proceedings of IAU Symposium 283, held in Puerto de la Cruz, Tenerife, Spain, July 25-29 201

Detection of the Central Star of the Planetary Nebula NGC 6302

NGC 6302 is one of the highest ionization planetary nebulae known and shows emission from species with ionization potential >300eV. The temperature of the central star must be >200,000K to photoionize the nebula, and has been suggested to be up to ~ 400,000K. On account of the dense dust and molecular disc, the central star has not convincingly been directly imaged until now. NGC 6302 was imaged in six narrow band filters by Wide Field Camera 3 on HST as part of the Servicing Mission 4 Early Release Observations. The central star is directly detected for the first time, and is situated at the nebula centre on the foreground side of the tilted equatorial disc. The magnitudes of the central star have been reliably measured in two filters(F469N and F673N). Assuming a hot black body, the reddening has been measured from the (4688-6766\AA) colour and a value of c=3.1, A_v=6.6 mag determined. A G-K main sequence binary companion can be excluded. The position of the star on the HR diagram suggests a fairly massive PN central star of about 0.64,M_sun close to the white dwarf cooling track. A fit to the evolutionary tracks for (T,L,t)=(200,000K, 2000L_sun, 2200yr), where t is the nebular age, is obtained; however the luminosity and temperature remain uncertain. The model tracks predict that the star is rapidly evolving, and fading at a rate of almost 1 % per year. Future observations could test this prediction.Comment: 13 pages, 5 figures, submitted to ApJ Letters on 25.09.2009 accepted on 19.10.200

Structural modification of nanohydroxyapatite Ca10(PO4)6(OH)2 related to Eu3+ and Sr2+ ions doping and its spectroscopic and antimicrobial properties

The Eu3+ and Sr2+ ions co-doped hydroxyapatite nanopowders (Ca10(PO4)6(OH)2) were synthesized via a precipitation method and post heat-treated at 500 °C. The concentration of Eu3+ ions was established in the range of 0.5–5 mol% to investigate the site occupancy preference. The concentration of Sr2+ ions was set at 5 mol%. The structural and morphological properties of the obtained materials were studied by an X-ray powder diffraction, a transmission electron microscopy techniques and infrared spectroscopy. As synthesized nanoparticles were in the range of 11–17 nm and annealed particles were in the range of 20–26 nm. The luminescence properties in dependence of the dopant concentration and applied temperature were investigated. The 5D0 → 7F0 transition shown the abnormally strong intensity for annealed materials connected with the increase of covalency character of Eu3+–O2− bond, which arise as an effect of charge compensation mechanism. The Eu3+ ions occupied three possible crystallographic sites in these materials revealed in emission spectra: one Ca(1) site with C3 symmetry and two Ca(2) sites with Cs symmetry arranged as cis and trans symmetry. The antibacterial properties of Eu3+ and Sr2+ ions doped and co-doped hydroxyapatite nanopowders were also determined against Gram-negative pathogens such as Pseudomonas aeruginosa, Klebsiella pneumoniae and Escherichia coli. Obtained results suggest that both europium and strontium ions may implement antibacterial properties for hydroxyapatites. In the most cases, better antibacterial effect we noticed for dopants at 5 mol% ratio. However, the effect is strongly species- and strain-dependent feature

Molecfit: A general tool for telluric absorption correction. I. Method and application to ESO instruments

Context: The interaction of the light from astronomical objects with the constituents of the Earth's atmosphere leads to the formation of telluric absorption lines in ground-based collected spectra. Correcting for these lines, mostly affecting the red and infrared region of the spectrum, usually relies on observations of specific stars obtained close in time and airmass to the science targets, therefore using precious observing time. Aims: We present molecfit, a tool for correcting for telluric absorption lines based on synthetic modelling of the Earth's atmospheric transmission. Molecfit is versatile and can be used with data obtained with various ground-based telescopes and instruments. Methods: Molecfit combines a publicly available radiative transfer code, a molecular line database, atmospheric profiles, and various kernels to model the instrument line spread function. The atmospheric profiles are created by merging a standard atmospheric profile representative of a given observatory's climate, of local meteorological data, and of dynamically retrieved altitude profiles for temperature, pressure, and humidity. We discuss the various ingredients of the method, its applicability, and its limitations. We also show examples of telluric line correction on spectra obtained with a suite of ESO Very Large Telescope (VLT) instruments. Results: Compared to previous similar tools, molecfit takes the best results for temperature, pressure, and humidity in the atmosphere above the observatory into account. As a result, the standard deviation of the residuals after correction of unsaturated telluric lines is frequently better than 2% of the continuum. Conclusion: Molecfit is able to accurately model and correct for telluric lines over a broad range of wavelengths and spectral resolutions. (Abridged)Comment: 18 pages, 13 figures, 5 tables, accepted for publication in Astronomy and Astrophysic

A biophysical model of the early olfactory system of honeybees

Experimental measurements often can only provide limited data from an animal’s sensory system. In addition, they exhibit large trial-to-trial and animal-to-animal variability. These limitations pose challenges to building mathematical models intended to make biologically relevant predictions. Here, we present a mathematical model of the early olfactory system of honeybees aiming to overcome these limitations. The model generates olfactory response patterns which conform to the statistics derived from experimental data for a variety of their properties. This allows considering the full dimensionality of the sensory input space as well as avoiding overfitting the underlying data sets. Several known biological mechanisms, including processes of chemical binding and activation of receptors, and spike generation and transmission in the antennal lobe network, are incorporated in the model at a minimal level. It can therefore be used to study how experimentally observed phenomena are shaped by these underlying biophysical processes. We verified that our model can replicate some key experimental findings that were not used when building it. Given appropriate data, our model can be generalized to the early olfactory systems of other insects. It hence provides a possible framework for future numerical and analytical studies of olfactory processing in insects