Forward modeling of emission in SDO/AIA passbands from dynamic 3D simulations

It is typically assumed that emission in the passbands of the Atmospheric Imaging Assembly (AIA) onboard the Solar Dynamics Observatory (SDO) is dominated by single or several strong lines from ions that under equilibrium conditions are formed in a narrow range of temperatures. However, most SDO/AIA channels also contain contributions from lines of ions that have formation temperatures that are significantly different from the "dominant" ion(s). We investigate the importance of these lines by forward modeling the emission in the SDO/AIA channels with 3D radiative MHD simulations of a model that spans the upper layer of the convection zone to the low corona. The model is highly dynamic. In addition, we pump a steadily increasing magnetic flux into the corona, in order to increase the coronal temperature through the dissipation of magnetic stresses. As a consequence, the model covers different ranges of coronal temperatures as time progresses. The model covers coronal temperatures that are representative of plasma conditions in coronal holes and quiet sun. The 131, 171, and 304 \AA{} AIA passbands are found to be least influenced by the so-called "non-dominant" ions, and the emission observed in these channels comes mostly from plasma at temperatures near the formation temperature of the dominant ion(s). On the other hand, the other channels are strongly influenced by the non-dominant ions, and therefore significant emission in these channels comes from plasma at temperatures that are different from the "canonical" values. We have also studied the influence of non-dominant ions on the AIA passbands when different element abundances are assumed (photospheric and coronal), and when the effects of the electron density on the contribution function are taken into account.Comment: 48 pages, 14 figures, accepted to be publish in Ap

On the origin of the magnetic energy in the quiet solar chromosphere

The presence of magnetic field is crucial in the transport of energy through the solar atmosphere. Recent ground-based and space-borne observations of the quiet Sun have revealed that magnetic field accumulates at photospheric heights, via a local dynamo or from small-scale flux emergence events. However, most of this small-scale magnetic field may not expand into the chromosphere due to the entropy drop with height at the photosphere. Here we present a study that uses a high resolution 3D radiative MHD simulation of the solar atmosphere with non-grey and non-LTE radiative transfer and thermal conduction along the magnetic field to reveal that: 1) the net magnetic flux from the simulated quiet photosphere is not sufficient to maintain a chromospheric magnetic field (on average), 2) processes in the lower chromosphere, in the region dominated by magneto-acoustic shocks, are able to convert kinetic energy into magnetic energy, 3) the magnetic energy in the chromosphere increases linearly in time until the r.m.s. of the magnetic field strength saturates at roughly 4 to 30 G (horizontal average) due to conversion from kinetic energy, 4) and that the magnetic features formed in the chromosphere are localized to this region.Comment: 12 pages, 14 figures, accepted to be published in Ap

Spicule-like structures observed in 3D realistic MHD simulations

We analyze features that resemble type i spicules in two different 3D numerical simulations in which we include horizontal magnetic flux emergence in a computational domain spanning the upper layers of the convection zone to the lower corona. The two simulations differ mainly in the preexisting ambient magnetic field strength and in the properties of the inserted flux tube. We use the Oslo Staggered Code (OSC) to solve the full MHD equations with non-grey and non-LTE radiative transfer and thermal conduction along the magnetic field lines. We find a multitude of features that show a spatiotemporal evolution that is similar to that observed in type i spicules, which are characterized by parabolic height vs. time profiles, and are dominated by rapid upward motion at speeds of 10-30 km/s, followed by downward motion at similar velocities. We measured the parameters of the parabolic profile of the spicules and find similar correlations between the parameters as those found in observations. The values for height (or length) and duration of the spicules found in the simulations are more limited in range than those in the observations. The spicules found in the simulation with higher preexisting ambient field have shorter length and smaller velocities. From the simulations, it appears that these kinds of spicules can, in principle, be driven by a variety of mechanisms that include p-modes, collapsing granules, magnetic energy release in the photosphere and lower chromosphere and convective buffeting of flux concentrations.Comment: 31 pages, 9 figures. accepted the 23 of June in Ap

Twisted flux tube emergence from the convection zone to the corona II: Later states

3D simulations of magnetic flux emergence are carried out in a computational domain spanning the upper layers of the convection zone to the lower corona. We use the Oslo Staggered Code to solve the full MHD equations with non-grey and NLTE radiative transfer and thermal conduction along the magnetic field lines. In this paper we concentrate on the later stages of the simulations and study the evolution of the structure of the rising flux in the upper chromosphere and corona, the interaction between the emerging flux and the weak coronal magnetic field initially present, and the associated dynamics. The flux tube injected at the bottom boundary rises to the photosphere where it largely remains. However, some parts of the flux tube become unstable and expand in patches into the upper chromosphere. The flux rapidly expands towards the corona, pushing the coronal and transition region material aside, lifting and maintaining the transition region at heights greater than 5 Mm above the photosphere for extensive periods of time. The pre-existing magnetic field in the corona and transition region is perturbed by the incoming flux and reoriented by a series of high Joule heating events. Low density structures form in the corona while at later times a high density filamentary structure appears in the lower part of the expanding flux. The dynamics of these and other structures is discussed. While Joule heating due to the expanding flux is episodic, it increases in relative strength as fresh magnetic field rises and becomes energetically important in the upper chromosphere and corona at later times. Chromospheric, transition region and coronal lines are computed and their response to the perturbation caused by the expanding emerging flux is discussed.Comment: 31 pages, 12 figures, accepted in Ap

Two-dimensional Radiative Magnetohydrodynamic Simulations of Partial Ionization in the Chromosphere. II. Dynamics and Energetics of the Low Solar Atmosphere

We investigate the effects of interactions between ions and neutrals on the chromosphere and overlying corona using 2.5D radiative MHD simulations with the Bifrost code. We have extended the code capabilities implementing ion-neutral interaction effects using the Generalized Ohm's Law, i.e., we include the Hall term and the ambipolar diffusion (Pedersen dissipation) in the induction equation. Our models span from the upper convection zone to the corona, with the photosphere, chromosphere and transition region partially ionized. Our simulations reveal that the interactions between ionized particles and neutral particles have important consequences for the magneto-thermodynamics of these modeled layers: 1) ambipolar diffusion increases the temperature in the chromosphere; 2) sporadically the horizontal magnetic field in the photosphere is diffused into the chromosphere due to the large ambipolar diffusion; 3) ambipolar diffusion concentrates electrical currents leading to more violent jets and reconnection processes, resulting in 3a) the formation of longer and faster spicules, 3b) heating of plasma during the spicule evolution, and 3c) decoupling of the plasma and magnetic field in spicules. Our results indicate that ambipolar diffusion is a critical ingredient for understanding the magneto-thermo-dynamic properties in the chromosphere and transition region. The numerical simulations have been made publicly available, similar to previous Bifrost simulations. This will allow the community to study realistic numerical simulations with a wider range of magnetic field configurations and physics modules than previously possible.Comment: 13 figures. Accepted to be published in Ap

Thermal Instability–Induced Fundamental Magnetic Field Strands in the Solar Corona

Thermal instability is a fundamental process of astrophysical plasmas. It is expected to occur whenever the cooling is dominated by radiation and cannot be compensated for by heating. In this work, we conduct 2.5D radiation MHD simulations with the Bifrost code of an enhanced activity network in the solar atmosphere. Coronal loops are produced self-consistently, mainly through Joule heating, which is sufficiently stratified and symmetric to produce thermal nonequilibrium. During the cooling and driven by thermal instability, coronal rain is produced along the loops. Due to flux freezing, the catastrophic cooling process leading to a rain clump produces a local enhancement of the magnetic field, thereby generating a distinct magnetic strand within the loop up to a few Gauss stronger than the surrounding coronal field. These strands, which can be considered fundamental, are a few hundred kilometers in width, span most of the loop leg, and emit strongly in the UV and extreme UV (EUV), thereby establishing a link between the commonly seen rain strands in the visible spectrum with the observed EUV coronal strands at high resolution. The compression downstream leads to an increase in temperature that generates a plume-like structure, a strongly emitting spicule-like feature, and short-lived brightening in the UV during the rain impact, providing an explanation for similar phenomena seen with IRIS. Thermal instability and nonequilibrium can therefore be associated with localized and intermittent UV brightening in the transition region and chromosphere, as well as contribute to the characteristic filamentary morphology of the solar corona in the EUV

Twisted flux tube emergence from the convection zone to the corona

3D numerical simulations of a horizontal magnetic flux tube emergence with different twist are carried out in a computational domain spanning the upper layers of the convection zone to the lower corona. We use the Oslo Staggered Code to solve the full MHD equations with non-grey and non-LTE radiative transfer and thermal conduction along the magnetic field lines. The emergence of the magnetic flux tube input at the bottom boundary into a weakly magnetized atmosphere is presented. The photospheric and chromospheric response is described with magnetograms, synthetic images and velocity field distributions. The emergence of a magnetic flux tube into such an atmosphere results in varied atmospheric responses. In the photosphere the granular size increases when the flux tube approaches from below. In the convective overshoot region some 200km above the photosphere adiabatic expansion produces cooling, darker regions with the structure of granulation cells. We also find collapsed granulation in the boundaries of the rising flux tube. Once the flux tube has crossed the photosphere, bright points related with concentrated magnetic field, vorticity, high vertical velocities and heating by compressed material are found at heights up to 500km above the photosphere. At greater heights in the magnetized chromosphere, the rising flux tube produces a cool, magnetized bubble that tends to expel the usual chromospheric oscillations. In addition the rising flux tube dramatically increases the chromospheric scale height, pushing the transition region and corona aside such that the chromosphere extends up to 6Mm above the photosphere. The emergence of magnetic flux tubes through the photosphere to the lower corona is a relatively slow process, taking of order 1 hour.Comment: 53 pages,79 figures, Submitted to Ap