1,000 research outputs found
Transition from tunneling to direct contact in tungsten nanojunctions
We apply the mechanically controllable break junctions technique to
investigate the transition from tunneling to direct contact in tungsten. This
transition is quite different from that of other metals and is determined by
the local electronic properties of the tungsten surface and the relief of the
electrodes at the point of their closest proximity. The conductance traces show
a rich variety of patterns from the avalanche-like jump to a mesoscopic contact
to the completely smooth transition between direct contact and tunneling. Due
to the occasional absence of an adhesive jump the conductance of the contact
can be continuously monitored at ultra-small electrode separations. The
conductance histograms of tungsten are either featureless or show two distinct
peaks related to the sequential opening of spatially separated groups of
conductance channels. The role of surface states of tungsten and their
contribution to the junction conductance at sub-Angstrom electrode separations
are discussed.Comment: 6 pages, 6 figure
Characterizations and comparison of low sulfur fuel oils compliant with 2020 global sulfur cap regulation for international shipping
The International Marine Organization 2020 Global Sulfur Cap requires ships to burn fuels with <0.50% S and some countries require <0.10% S in certain Sulfur Emission Control Areas but little is known about these new types of fuels. Using both traditional GC–MS and more advanced chromatographic and mass spectrometry techniques, plus stable isotopic, δ13C and δ2H, analyses of pristane, phytane and n-alkanes, the organic components of a suite of three 0.50% S and three 0.10% S compliant fuels were characterized. Two oils were found to be near identical but all of the remaining oils could be forensically distinguished by comparison of their molecular biomarkers and by the profiles of the heterocyclic parent and alkylated homologues. Oils could also be differentiated by their δ13C and δ2H of n-alkanes and isoprenoids. This study provides important forensic data that may prove invaluable in the event of future oil spills
Transverse lattice calculation of the pion light-cone wavefunctions
We calculate the light-cone wavefunctions of the pion by solving the meson
boundstate problem in a coarse transverse lattice gauge theory using DLCQ. A
large-N_c approximation is made and the light-cone Hamiltonian expanded in
massive dynamical fields at fixed lattice spacing. In contrast to earlier
calculations, we include contributions from states containing many gluonic
link-fields between the quarks.The Hamiltonian is renormalised by a combination
of covariance conditions on boundstates and fitting the physical masses M_rho
and M_pi, decay constant f_pi, and the string tension sigma. Good covariance is
obtained for the lightest 0^{-+} state, which we identify with the pion. Many
observables can be deduced from its light-cone wavefunctions.After perturbative
evolution,the quark valence structure function is found to be consistent with
the experimental structure function deduced from Drell-Yan pi-nucleon data in
the valence region x > 0.5. In addition, the pion distribution amplitude is
consistent with the experimental distribution deduced from the pi gamma^* gamma
transition form factor and diffractive dissociation. A new observable we
calculate is the probability for quark helicity correlation. We find a 45%
probability that the valence-quark helicities are aligned in the pion.Comment: 27 pages, 9 figure
An Evaluation of Ballute Entry Systems for Lunar Return Missions
AIAA Atmospheric Flight Mechanics Conference
August 2006, Keystone, CO.This study investigates the advantages and feasibility of using ballutes for Earth entry at
lunar return velocities. Using analysis methods suitable for conceptual design and assuming
a CEV type entry vehicle, multiple entry strategies were investigated. Entries that jettison
the ballute after achieving low Earth orbit conditions were shown to reduce heating rates to
within reusable thermal protection system limits. Deceleration was mitigated to
approximately four g's when a moderate amount of lift was applied subsequent to ballute
jettison. Primary ballute size drivers are the thermal limitations and areal densities of the
ballute material. Performance requirements for both of those metrics were generated over a
range of total ballute system masses. Lastly, preliminary investigation of a lower mass cargo
variant of the CEV allowed for additional reduction of ballute system mass. However,
ballute system mass as a percentage of the total entry mass was shown to be relatively
independent of the entry mass
New Insights into White-Light Flare Emission from Radiative-Hydrodynamic Modeling of a Chromospheric Condensation
(abridged) The heating mechanism at high densities during M dwarf flares is
poorly understood. Spectra of M dwarf flares in the optical and
near-ultraviolet wavelength regimes have revealed three continuum components
during the impulsive phase: 1) an energetically dominant blackbody component
with a color temperature of T 10,000 K in the blue-optical, 2) a smaller
amount of Balmer continuum emission in the near-ultraviolet at lambda 3646
Angstroms and 3) an apparent pseudo-continuum of blended high-order Balmer
lines. These properties are not reproduced by models that employ a typical
"solar-type" flare heating level in nonthermal electrons, and therefore our
understanding of these spectra is limited to a phenomenological interpretation.
We present a new 1D radiative-hydrodynamic model of an M dwarf flare from
precipitating nonthermal electrons with a large energy flux of erg
cm s. The simulation produces bright continuum emission from a
dense, hot chromospheric condensation. For the first time, the observed color
temperature and Balmer jump ratio are produced self-consistently in a
radiative-hydrodynamic flare model. We find that a T 10,000 K
blackbody-like continuum component and a small Balmer jump ratio result from
optically thick Balmer and Paschen recombination radiation, and thus the
properties of the flux spectrum are caused by blue light escaping over a larger
physical depth range compared to red and near-ultraviolet light. To model the
near-ultraviolet pseudo-continuum previously attributed to overlapping Balmer
lines, we include the extra Balmer continuum opacity from Landau-Zener
transitions that result from merged, high order energy levels of hydrogen in a
dense, partially ionized atmosphere. This reveals a new diagnostic of ambient
charge density in the densest regions of the atmosphere that are heated during
dMe and solar flares.Comment: 50 pages, 2 tables, 13 figures. Accepted for publication in the Solar
Physics Topical Issue, "Solar and Stellar Flares". Version 2 (June 22, 2015):
updated to include comments by Guest Editor. The final publication is
available at Springer via http://dx.doi.org/10.1007/s11207-015-0708-
Multimessenger astronomy with the Einstein Telescope
Gravitational waves (GWs) are expected to play a crucial role in the
development of multimessenger astrophysics. The combination of GW observations
with other astrophysical triggers, such as from gamma-ray and X-ray satellites,
optical/radio telescopes, and neutrino detectors allows us to decipher science
that would otherwise be inaccessible. In this paper, we provide a broad review
from the multimessenger perspective of the science reach offered by the third
generation interferometric GW detectors and by the Einstein Telescope (ET) in
particular. We focus on cosmic transients, and base our estimates on the
results obtained by ET's predecessors GEO, LIGO, and Virgo.Comment: 26 pages. 3 figures. Special issue of GRG on the Einstein Telescope.
Minor corrections include
Academic requirements for Certificate of Completion of Training in surgical training: Consensus recommendations from the Association of Surgeons in Training/National Research Collaborative Consensus Group.
BACKGROUND: Surgical trainees are expected to demonstrate academic achievement in order to obtain their certificate of completion of training (CCT). These standards are set by the Joint Committee on Surgical Training (JCST) and specialty advisory committees (SAC). The standards are not equivalent across all surgical specialties and recognise different achievements as evidence. They do not recognise changes in models of research and focus on outcomes rather than process. The Association of Surgeons in Training (ASiT) and National Research Collaborative (NRC) set out to develop progressive, consistent and flexible evidence set for academic requirements at CCT. METHODS: A modified-Delphi approach was used. An expert group consisting of representatives from the ASiT and the NRC undertook iterative review of a document proposing changes to requirements. This was circulated amongst wider stakeholders. After ten iterations, an open meeting was held to discuss these proposals. Voting on statements was performed using a 5-point Likert Scale. Each statement was voted on twice, with ≥80% of votes in agreement meaning the statement was approved. The results of this vote were used to propose core and optional academic requirements for CCT. RESULTS: Online discussion concluded after ten rounds. At the consensus meeting, statements were voted on by 25 delegates from across surgical specialties and training-grades. The group strongly favoured acquisition of 'Good Clinical Practice' training and research methodology training as CCT requirements. The group agreed that higher degrees, publications in any author position (including collaborative authorship), recruiting patients to a study or multicentre audit and presentation at a national or international meeting could be used as evidence for the purpose of CCT. The group agreed on two essential 'core' requirements (GCP and methodology training) and two of a menu of four 'additional' requirements (publication with any authorship position, presentation, recruitment of patients to a multicentre study and completion of a higher degree), which should be completed in order to attain CCT. CONCLUSION: This approach has engaged stakeholders to produce a progressive set of academic requirements for CCT, which are applicable across surgical specialties. Flexibility in requirements whilst retaining a high standard of evidence is desirable
Structural characterisation of neutrophil glycans by ultra sensitive mass spectrometric glycomics methodology
Neutrophils are the most abundant white blood cells in humans and play a vital role in several aspects of the immune response. Numerous reports have implicated neutrophil glycosylation as an important factor in mediating these interactions. We report here the application of high sensitivity glycomics methodologies, including matrix assisted laser desorption ionisation (MALDI-TOF) and MALDI-TOF/TOF analyses, to the structural analysis of N- and O-linked carbohydrates released from two samples of neutrophils, prepared by two separate and geographically remote laboratories. The data produced demonstrates that the cells display a diverse range of sialylated and fucosylated complex glycans, with a high level of similarity between the two preparations
- …