1,084 research outputs found
Effect of ambient temperature during acute aerobic exercise on short-term appetite, energy intake, and plasma acylated ghrelin in recreationally active males
Ambient temperature during exercise may affect energy intake regulation. Compared with a temperate (20 °C) environment, 1 h of running followed by 6 h of rest tended to decrease energy intake from 2 ad libitum meals in a hot (30 °C) environment but increase energy intake in a cool (10 °C) environment (p = 0.08). Core temperature changes did not appear to mediate this trend; whether acylated ghrelin is involved is unclear. Further research is warranted to clarify these findings
Study of temperature-growth interactions of entomopathogenic fungi with potential for control of Varroa destructor (Acari: Mesostigmata) using a nonlinear model of poikilotherm development
Aims: To investigate the thermal biology of entomopathogenic fungi being examined as potential microbial control agents of Varroa destructor , an ectoparasite of the European honey bee Apis mellifera . Methods and Results: Colony extension rates were measured at three temperatures (20, 30 and 35degreesC) for 41 isolates of entomopathogenic fungi. All of the isolates grew at 20 and 30degreesC but only 11 isolates grew at 35degreesC. Twenty-two isolates were then selected on the basis of appreciable growth at 30-35degreesC (the temperature range found within honey bee colonies) and/or infectivity to V. destructor , and their colony extension rates were measured at 10 temperatures (12.5-35degreesC). This data were then fitted to Schoolfield et al . [J Theor Biol (1981)88:719-731] re-formulation of the Sharpe and DeMichele [J Theor Biol (1977)64:649-670] model of poikilotherm development. Overall, this model accounted for 87.6-93.9% of the data variance. Eleven isolates exhibited growth above 35degreesC. The optimum temperatures for extension rate ranged from 22.9 to 31.2degreesC. Only three isolates exhibited temperature optima above 30degreesC. The super-optimum temperatures (temperature above the optimum at which the colony extension rate was 10% of the maximum rate) ranged from 31.9 to 43.2degreesC. Conclusions: The thermal requirements of the isolates examined against V. destructor are well matched to the temperatures in the broodless areas of honey bee colonies, and a proportion of isolates, should also be able to function within drone brood areas. Significance and Impact of the Study: Potential exists for the control of V. destructor with entomopathogenic fungi in honey bee colonies. The methods employed in this study could be utilized in the selection of isolates for microbial control prior to screening for infectivity and could help in predicting the activity of a fungal control agent of V. destructor under fluctuating temperature conditions
Radiative Extinction of Gaseous Spherical Diffusion Flames in Microgravity
Radiative extinction of spherical diffusion flames was investigated experimentally and numerically. The experiments involved microgravity spherical diffusion flames burning ethylene and propane at 0.98 bar. Both normal (fuel flowing into oxidizer) and inverse (oxidizer flowing into fuel) flames were studied, with nitrogen supplied to either the fuel or the oxygen. Flame conditions were chosen to ensure that the flames extinguished within the 2.2 s of available test time; thus extinction occurred during unsteady flame conditions. Diagnostics included color video and thin-filament pyrometry. The computations, which simulated flow from a porous sphere into a quiescent environment, included detailed chemistry, transport and radiation, and yielded transient results. Radiative extinction was observed experimentally and simulated numerically. Extinction time, peak temperature, and radiative loss fraction were found to be independent of flow rate except at very low flow rates. Radiative heat loss was dominated by the combustion products downstream of the flame and was found to scale with flame surface area, not volume. For large transient flames the heat release rate also scaled with surface area and thus the radiative loss fraction was largely independent of flow rate. Peak temperatures at extinction onset were about 1100 K, which is significantly lower than for kinetic extinction. One observation of this work is that while radiative heat losses can drive transient extinction, this is not because radiative losses are increasing with time (flame size) but rather because the heat release rate is falling off as the temperature drops
Source attribution of poly- and perfluoroalkyl substances (PFASs) in surface waters from Rhode Island and the New York Metropolitan Area
Exposure to poly- and perfluoroalkyl substances (PFASs) has been associated with adverse health effects in humans and wildlife. Understanding pollution sources is essential for environmental regulation, but source attribution for PFASs has been confounded by limited information about industrial releases and rapid changes in chemical production. Here we use principal component analysis (PCA), hierarchical clustering, and geospatial analysis to understand source contributions to 14 PFASs measured across 37 sites in the northeastern United States in 2014. PFASs are significantly elevated in urban areas compared to rural sites except for perfluorobutanesulfonate, N-methyl perfluorooctanesulfonamidoacetic acid, perfluoroundecanate, and perfluorododecanate. The highest PFAS concentrations across sites were those of perfluorooctanate (PFOA, 56 ng L−1) and perfluorohexanesulfonate (PFHxS, 43 ng L−1), and perfluorooctanesulfonate (PFOS) levels are lower than earlier measurements of U.S. surface waters. PCA and cluster analysis indicate three main statistical groupings of PFASs. Geospatial analysis of watersheds reveals the first component/cluster originates from a mixture of contemporary point sources such as airports and textile mills. Atmospheric sources from the waste sector are consistent with the second component, and the metal smelting industry plausibly explains the third component. We find this source-attribution technique is effective for better understanding PFAS sources in urban areas
Effects of Lewis Number on Temperatures of Spherical Diffusion Flames
Spherical diffusion flames supported on a porous sphere were studied numerically and experimentally. Experiments were performed in 2.2 s and 5.2 s microgravity facilities. Numerical results were obtained from a Chemkin-based program. The program simulates flow from a porous sphere into a quiescent environment, yields both steady-state and transient results, and accounts for optically thick gas-phase radiation. The low flow velocities and long residence times in these diffusion flames lead to enhanced radiative and diffusive effects. Despite similar adiabatic flame temperatures, the measured and predicted temperatures varied by as much as 700 K. The temperature reduction correlates with flame size but characteristic flow times and, importantly, Lewis number also influence temperature. The numerical results show that the ambient gas Lewis number would have a strong effect on flame temperature if the flames were steady and nonradiating. For example, a 10% decrease in Lewis number would increase the steady-state flame temperature by 200 K. However, for these transient, radiating flames the effect of Lewis number is small. Transient predictions of flame sizes are larger than those observed in microgravity experiments. Close agreement could not be obtained without either increasing the model s thermal and mass diffusion properties by 30% or reducing mass flow rate by 25%
Recommended from our members
Hematopoietic stem cell gene therapy for brain metastases using myeloid cell-specific gene promoters
Background:
Brain metastases (BrM) develop in 20-40% of cancer patients and represent an unmet clinical need. Limited access of drugs into the brain due to the blood-brain barrier is at least partially responsible for therapeutic failure, necessitating improved drug delivery systems.
Methods:
Green fluorescent protein (GFP)-transduced murine and non-transduced human hematopoietic stem cells (HSCs) were administered into mice (n = 10 and 3). The HSC progeny in mouse BrM and in patient-derived BrM tissue (n = 6) was characterized by flow cytometry and immunofluorescence. Promoters driving gene expression, specifically within the BrM-infiltrating HSC progeny, were identified through differential gene expression analysis and subsequent validation of a series of promoter-GFP-reporter constructs in mice (n = 5). One of the promoters was used to deliver TNF-related apoptosis-inducing ligand (TRAIL) to BrM in mice (n = 17/21 for TRAIL versus control group).
Results:
HSC progeny (consisting mostly of macrophages) efficiently homed to macrometastases (37.6% [SD = 7.2%] of all infiltrating cells for murine HSC progeny; 27.9% [SD = 4.9%] of infiltrating CD45+ hematopoietic cells for human HSC progeny) and micrometastases in mice (19.3-53.3% of all macrophages for murine HSCs). Macrophages were also abundant in patient-derived BrM tissue (8.8%, SD = 7.8%). Collectively, this provided a rationale to optimize the delivery of gene therapy to BrM within myeloid cells. MMP14 promoter emerged as the strongest promoter construct capable of limiting gene expression to BrM-infiltrating myeloid cells in mice TRAIL delivered under MMP14 promoter statistically significantly prolonged survival in mice (19.0 [SD = 3.4] versus 15.0 [SD = 2.0] days for TRAIL versus control group; two-sided p = 0.006), demonstrating therapeutic and translational potential of our approach.
Conclusions:
Our study establishes HSC gene therapy using a myeloid cell-specific promoter as a new strategy to target BrM. This approach, with strong translational value, has potential to overcome the blood-brain barrier, target micrometastases, and control multifocal lesions
Issues and Challenges in Applications of Artificial Intelligence to Nuclear Medicine -- The Bethesda Report (AI Summit 2022)
The SNMMI Artificial Intelligence (SNMMI-AI) Summit, organized by the SNMMI
AI Task Force, took place in Bethesda, MD on March 21-22, 2022. It brought
together various community members and stakeholders from academia, healthcare,
industry, patient representatives, and government (NIH, FDA), and considered
various key themes to envision and facilitate a bright future for routine,
trustworthy use of AI in nuclear medicine. In what follows, essential issues,
challenges, controversies and findings emphasized in the meeting are
summarized
Sampling and distribution pattern of Trioza erytreae Del Guercio, 1918 (Hemiptera: Triozidae) in citrus orchard
Developing efficient sampling protocols is essential to monitor crop pests. One vector of the citrus disease HLB, the African citrus psyllid Trioza erytreae Del Guercio, 1918 (Hemiptera: Triozidae), currently threatens the lemon industry throughout the Mediterranean region. In this work, a pool of sampling methods devoted to monitoring the population of T. erytreae was compared, its spatial distribution in the orchard was assessed, and the minimum sampling effort for the best sampling method was estimated. Three lemon orchards in North-western Portugal were sampled for one year using two types of yellow sticky traps (standard yellow and fluorescent Saturn yellow), B-vac sampling and sweep net sampling. The method that best performed, in terms of cost-efficiency, was the yellow sticky traps. The two colours of the sticky traps tested did not yield a significantly different number of catches. The spatial distribution throughout the orchards was found to be aggregated towards the borders. A minimum of three sticky traps per hectare was found to be enough to estimate the population at 90% accuracy for the mean during the outbreak. These results should help to monitor and anticipate outbreaks that may even colonize neighbour orchards. Studies on the local dispersion patterns of T. erytreae throughout the orchard are mandatory to further refine and optimize efficient monitoring protocols.The authors are grateful to the Foundation for Science and
Technology (FCT, Portugal), for financial support through national
funds FCT/MCTES to CIMO (UIDB/00690/2020) and to the project
PRE-HLB-Preventing HLB epidemics for ensuring citrus survival in
Europe (H2020-SFS-2018-2 Topic SFS-05-2018-2019-2020, proj. No. 817526).info:eu-repo/semantics/publishedVersio
HOMMEXX 1.0: a performance-portable atmospheric dynamical core for the Energy Exascale Earth System Model
We present an architecture-portable and
performant implementation of the atmospheric dynamical core (High-Order
Methods Modeling Environment, HOMME) of the Energy Exascale Earth System
Model (E3SM). The original Fortran implementation is highly performant and
scalable on conventional architectures using the Message Passing Interface
(MPI) and Open MultiProcessor (OpenMP) programming models.
We rewrite the model in C++ and use the Kokkos library to
express on-node parallelism in a largely architecture-independent
implementation. Kokkos provides an abstraction of a compute node or device,
layout-polymorphic multidimensional arrays, and parallel execution
constructs. The new implementation achieves the same or better performance on
conventional multicore computers and is portable to GPUs. We present
performance data for the original and new implementations on multiple
platforms, on up to 5400 compute nodes, and study several aspects of the
single- and multi-node performance characteristics of the new implementation
on conventional CPU (e.g., Intel Xeon), many core CPU (e.g., Intel Xeon Phi Knights Landing),
and Nvidia V100 GPU.</p
- …