Study of the photochemical and photophysical properties of ruthenium(II) and rhenium(I) complexes

Dans cette thèse nous présentons les résultats des études expérimentales et théoriques sur : (i) les propriétés photophysiques et photochimiques de complexes de ruthénium(II) à ligands polypyridines, (ii) celles d'un complexe de rhénium(I) à ligand TTF-triazole, ainsi que (iii) la luminescence de conversion ascendante dans des nanoparticules dopés aux lanthanides et le transfert d'énergie vers des complexes de ruthénium(II)

Label-Free Hyper Rayleigh and Second Harmonic Scattering with High Efficiency

We present a method to perform hyper Rayleigh scattering from aqueous solutions and second harmonic scattering measurements from unlabeled interfaces of liposomes and nanoparticles in dilute solutions. The water and interfacial response can be measured on a millisecond timescale, thus opening up the possibility to measure label-free time dependent transport processes in biological (membrane) systems

Ultrafast transient IR spectroscopy and DFT calculations of ruthenium(II) polypyridyl complexes

Ultrafast time-resolved infrared spectroscopy of [Ru(bpy)3]2+ (bpy = 2,2'-bipyridine), [Ru(mbpy)3]2+ (mbpy = 6-methyl-2,2'-bipyridine), and [Ru(mphen)3]2+ (mphen = 2-methyl-1,10'-phenanthroline) in deuterated acetonitrile serves to elucidate the evolution of the system following pulsed excitation into the 1MLCT band at 400 nm. Whereas for [Ru(bpy)3]2+ no intermediate state can be evidenced for the relaxation of the corresponding 3MLCT state back to the ground state, for [Ru(mbpy)3]2+ and [Ru(mphen)3]2+ an intermediate state with a lifetime of about 400 ps is observed. The species associated IR difference spectra of this state are in good agreement with the calculated difference spectra of the lowest energy 3dd state using DFT. The calculated potential energy curves for all the complexes in the triplet manifold along the metal-ligand distance show that for [Ru(bpy)3]2+ the 3dd state is at higher energy than the 3MLCT state and that there is a substantial barrier between the two minima. For [Ru(mbpy)3]2+ and [Ru(mphen)3]2+, the 3dd state is at lower energy than the 3MLCT state

Structural, photophysical and magnetic properties of transition metal complexes based on the dipicolylamino-chloro-1,2,4,5-tetrazine ligand

The ligand 3-chloro-6-dipicolylamino-1,2,4,5-tetrazine (Cl-TTZ-dipica) 1, prepared by the direct reaction between 3,6-dichloro-1,2,4,5-tetrazine and di(2-picolyl)-amine, afforded a series of four neutral transition metal complexes formulated as [Cl-TTZ-dipica-MCl2]2, with M = Zn(II) 2a, Cd(II) 2b, Mn(II) 2c and Co(II) 2d, when reacted with the corresponding metal chlorides. The dinuclear structure of the isostructural complexes was disclosed by single crystal X-ray analysis, clearly indicating the formation of [MII-(m-Cl)2MII] motifs and the involvement of the amino nitrogen atom in semi-coordination with the metal centers, thus leading to distorted octahedral coordination geometries. Moreover, the chlorine atoms, either coordinated to the metal or as substituent on the tetrazine ring, engage respectively in specific anion-p intramolecular and intermolecular interactions with the electron poor tetrazine units in the solid state, thus controlling the supramolecular architecture. Modulation of the emission properties is observed in the case of the Zn(II) and Cd(II) complexes when compared to the free ligand. A striking difference is observed in the magnetic properties of the Mn(II) and Co(II) complexes. An antiferromagnetic coupling takes place in the dimanganese(II) compound (J = -1.25 cm-1) while the Co(II) centers are ferromagnetically coupled in the corresponding complex (J = +0.55 cm-1), the spin Hamiltonian being defined as H = -JSA.SB

Experimental Evidence of Ultrafast Quenching of the ³MLCT Luminescence in Ruthenium(II) Tris-bipyridyl Complexes via a ³dd State

Ultrafast transient absorption spectroscopy serves to identify the 3dd state as intermediate quencher state of the 3MLCT luminescence in the non-luminescent ruthenium complexes [Ru(m-bpy)3]2+ (m-bpy = 6-methyl-2,2′-bipyridine) and [Ru(tm-bpy)3]2+ (tm-bpy = 4,4′,6,6′-tetramethyl-2′,2′-bipyridine). For [Ru(m-bpy)3]2+, the population of the 3dd state from the 3MLCT state occurs within 1.6 ps, while the return to the ground state takes 450 ps. For [Ru(tm-bpy)3]2+, the corresponding values are 0.16 and 7.5 ps, respectively. According to DFT calculations, methyl groups added in the 6 and 6′ positions of bipyridine stabilize the 3dd state by ∼4000 cm–1 each, compared to [Ru(bpy)3]2+

Triplet state CPL active helicene-dithiolene platinum bipyridine complexes

International audienceChiral metal dithiolene complexes represent a family of chiral precursors, which can give rise to molecular materials with properties resulting from the interplay of chirality with conductivity, magnetism, and photophysics. We describe herein the first examples of chiral metal diimine dithiolene complexes, by the use of a platinum(ii) centre coordinated by 2,2'-bipyridine and helicene-dithiolene ligands. The straightforward synthesis of racemic and enantiopure complexes allows the preparation of luminescent Pt(bipy) [4] and [6]helicene compounds for which the solid-state structure was determined as well. TD-DFT calculations support the assignment of the low-energy bands observed in the UV-vis absorption spectra as mixed metal-ligand-to-ligand charge transfer transitions and confirm that the emission band results from the T1 excited state. Interestingly, the enantiopure [6]helicene complexes show CPL activity at room temperature in acetonitrile solutions with an anisotropy factor of 3 × 10(-4)

On the role of ligand-field states for the photophysical properties of ruthenium(II) polypyridyl complexes

The role of ligand-field states for the photophysical properties of d6 systems has been discussed in a large number of publications over the past decades. Since the seminal paper by Houten and Watts, for instance, the quenching of the 3MLCT luminescence in ruthenium(II) polypyridyl complexes is attributed to the presence of the first excited ligand-field state, namely a component of the 3T1(t2g5eg1) state, at similar energies. If this state lies above the 3MLCT state, the luminescence is quenched via thermal population at elevated temperatures only. If it lies well below, then the luminescence is quenched down to cryogenic temperatures. In this contribution we present transient absorption spectra on non-luminescent ruthenium polypyridyl complexes such as [Ru(m-bpy)3]2+, m-bpy = 6-methyl-2,2’-bipyridine, in acetonitrile at room temperature, which reveal an ultra-rapid depopulation of the 3MLCT state but a much slower ground state recovery. We propose that in this and related complexes the methyl groups force longer metal-ligand bond lengths, thus resulting in a lowering of the ligand-field strength such that the 3dd state drops to below the 3MLCT state, and that furthermore the population of this state from the 3MLCT state occurs faster than its decay to the ground state. In addition we demonstrate that in this complex the luminescence can be switched on by external pressure, which we attribute to a destabilisation of the ligand-field state by the pressure due to its larger molecular volume compared to the ground state as well as the 3MLCT state

Intramolecular Charge-Transfer Dynamics in Benzodifuran-Based Triads

A facile and efficient approach for the synthesis of new conjugated donor-π-acceptor (D-π-A) chromophores has been developed, in which benzodifuran (BDF) and/or triphenyl amine (TPA) units are the donor moieties, linked by ethylenic bridges to electron-deficient anthraquinone (AQ) and 11,11,12,12-tetracyano-9,10-anthraquinodimethane (TCAQ) as the acceptor moieties. The resultant triads either with a symmetric A-D-A or an asymmetric D’-D-A structure show intense absorption bands in the visible spectral region due to efficient intramolecular charge transfer (ICT) from the HOMO localized on the BDF core to the LUMO localized on the AQ or the TCAQ unit. Electronic interactions between these redox-active components were studied by a combination of cyclic voltammetry, spectroelectrochemistry, UV-visible and ultrafast transient absorption spectroscopy. Analysis of the femtosecond excited-state dynamics reveal that all triads undergo a rapid charge recombination process which occurs within a few picoseconds, indicating that ethylenic linkers can facilitate electron delocalization among BDF and AQ/TCAQ units and thus impart effective electronic interactions between them

Experimental Evidence of Ultrafast Quenching of the ³MLCT Luminescence in Ruthenium(II) Tris-bipyridyl Complexes via a ³dd State

Ultrafast transient absorption spectroscopy serves to identify the ³dd state as intermediate quencher state of the ³MLCT luminescence in the non-luminescent ruthenium complexes [Ru­(m-bpy)₃]²⁺ (m-bpy = 6-methyl-2,2′-bipyridine) and [Ru­(tm-bpy)₃]²⁺ (tm-bpy = 4,4′,6,6′-tetramethyl-2′,2′-bipyridine). For [Ru­(m-bpy)₃]²⁺, the population of the ³dd state from the ³MLCT state occurs within 1.6 ps, while the return to the ground state takes 450 ps. For [Ru­(tm-bpy)₃]²⁺, the corresponding values are 0.16 and 7.5 ps, respectively. According to DFT calculations, methyl groups added in the 6 and 6′ positions of bipyridine stabilize the ³dd state by ∼4000 cm^–1 each, compared to [Ru­(bpy)₃]²⁺

White-light crosslinkable milk protein bioadhesive with ultrafast gelation for first-aid wound treatment

Abstract Background Post-traumatic massive hemorrhage demands immediately available first-aid supplies with reduced operation time and good surgical compliance. In-situ crosslinking gels that are flexibly adapting to the wound shape have a promising potential, but it is still hard to achieve fast gelation, on-demand adhesion, and wide feasibility at the same time. Methods A white-light crosslinkable natural milk-derived casein hydrogel bioadhesive is presented for the first time. Benefiting from abundant tyrosine residues, casein hydrogel bioadhesive was synthesized by forming di-tyrosine bonds under white light with a ruthenium-based catalyst. We firstly optimized the concentration of proteins and initiators to achieve faster gelation and higher mechanical strength. Then, we examined the degradation, cytotoxicity, tissue adhesion, hemostasis, and wound healing ability of the casein hydrogels to study their potential to be used as bioadhesives. Result Rapid gelation of casein hydrogel is initiated with an outdoor flashlight, a cellphone flashlight, or an endoscopy lamp, which facilitates its usage during first-aid and minimally invasive operations. The rapid gelation enables 3D printing of the casein hydrogel and excellent hemostasis even during liver hemorrhage due to section injury. The covalent binding between casein and tissue enables robust adhesion which can withstand more than 180 mmHg blood pressure. Moreover, the casein-based hydrogel can facilitate post-traumatic wound healing caused by trauma due to its biocompatibility. Conclusion Casein-based bioadhesives developed in this study pave a way for broad and practical application in emergency wound management