Advanced fiber-composite hybrids--A new structural material

Introduction of metal foil as part of matrix and fiber composite, or ""sandwich'', improves strength and stiffness for multidirectional loading, improves resistance to cyclic loading, and improves impact and erosion resistance of resultant fiber-composite hybrid structure

Self-contained breathing apparatus

A self-contained breathing apparatus with automatic redundant fluid pressure controls and a facemask mounted low pressure whistle alarm is described. The first stage of the system includes pair of pressure regulators connected in parallel with different outlet pressures, both of which reduce the pressure of the stored supply gas to pressures compatible with the second stage breathing demand regulator. A primary regulator in the first stage delivers a low output pressure to the demand regulator. In the event of a failure closed condition of the primary regulator an automatic transfer valve switches on the backup regulator. A warning that the supply pressure has been depleted is also provided by a supply pressure actuated transfer valve which transfers the output of the first stage pressure regulators from the primary to the backup regulator. The alarm is activated in either the failure closed condition or if the supply pressure is reduced to a dangerously low level

Design, fabrication, and initial test of a fixture for reducing the natural frequency of the Mod-O wind turbine tower

It was desired to observe the behavior of a two bladed wind turbine where the tower first bending natural frequency is less than twice the rotor speed. The system then passes through resonance when accelerating to operating speed. The frequency of the original Mod-O tower was reduced by placing it on a spring fixture. The fixture is adjustable to provide a range of tower bending frequencies. Fixture design details are given and behavior during initial operation is described

Boron/aluminum graphite/resin advanced fiber composite hybrids

Fabrication feasibility and potential of an adhesively bonded metal and resin matrix fiber-composite hybrid are determined as an advanced material for aerospace and other structural applications. The results show that using this hybrid concept makes possible a composite design which, when compared with nonhybrid composites, has greater transverse strength, transverse stiffness, and impact resistance with only a small penalty on density and longitudinal properties. The results also show that laminate theory is suitable for predicting the structural response of such hybrids. The sequence of fracture modes indicates that these types of hybrids can be readily designed to meet fail-safe requirements

Single stage, low noise, advanced technology fan. Volume 1: Aerodynamic design

The aerodynamic design for a half-scale fan vehicle, which would have application on an advanced transport aircraft, is described. The single stage advanced technology fan was designed to a pressure ratio of 1.8 at a tip speed of 503 m/sec 11,650 ft/sec). The fan and booster components are designed in a scale model flow size convenient for testing with existing facility and vehicle hardware. The design corrected flow per unit annulus area at the fan face is 215 kg/sec sq m (44.0 lb m/sec sq ft) with a hub-tip ratio of 0.38 at the leading edge of the fan rotor. This results in an inlet corrected airflow of 117.9 kg/sec (259.9 lb m/sec) for the selected rotor tip diameter if 90.37 cm (35.58 in.). The variable geometry inlet is designed utilizing a combination of high throat Mach number and acoustic treatment in the inlet diffuser for noise suppression (hybrid inlet). A variable fan exhaust nozzle was assumed in conjunction with the variable inlet throat area to limit the required area change of the inlet throat at approach and hence limit the overall diffusion and inlet length. The fan exit duct design was primarily influenced by acoustic requirements, including length of suppressor wall treatment; length, thickness and position on a duct splitter for additional suppressor treatment; and duct surface Mach numbers

Drive Train Normal Modes Analysis for the ERDA/NASA 100-Kilowatt Wind Turbine Generator

Natural frequencies, as a function of power were determined using a finite element model. Operating conditions investigated were operation with a resistive electrical load and operation synchronized to an electrical utility grid. The influence of certain drive train components on frequencies and mode shapes is shown. An approximate method for obtaining drive train natural frequencies is presented

Evaluation of MOSTAS computer code for predicting dynamic loads in two bladed wind turbines

Calculated dynamic blade loads were compared with measured loads over a range of yaw stiffnesses of the DOE/NASA Mod-O wind turbine to evaluate the performance of two versions of the MOSTAS computer code. The first version uses a time-averaged coefficient approximation in conjunction with a multi-blade coordinate transformation for two bladed rotors to solve the equations of motion by standard eigenanalysis. The second version accounts for periodic coefficients while solving the equations by a time history integration. A hypothetical three-degree of freedom dynamic model was investigated. The exact equations of motion of this model were solved using the Floquet-Lipunov method. The equations with time-averaged coefficients were solved by standard eigenanalysis

Implementing a Pre-Exposure Prophylaxis Intervention for Safer Conception among HIV Serodiscordant Couples: Recommendations for Health Care Providers

Couples in HIV serodiscordant relationships frequently desire children. Although partners who are virally suppressed pose almost no risk of transmitting HIV to their partners, partners who are inconsistently on therapy may transmit HIV to their partners when attempting to conceive. Pre-exposure prophylaxis (PrEP) is an available safer conception strategy for these couples but is not consistently offered. We sought to better understand barriers to PrEP implementation for couples seeking conception and patient perceptions on what providers could do to encourage use. We conducted in-depth, qualitative interviews with 11 participants representing six couples taking PrEP for safer conception in a safety-net hospital in New England. Semi-structured qualitative interviews assessed the following: Relationship nature and contextual factors; attitudes and perceptions regarding PrEP for safer conception; experience within health care systems related to HIV and PrEP; and facilitators, barriers, and other experiences using PrEP for safer conception. Four key themes have important implications for implementation of PrEP for safer conception: Knowledge and understanding gaps regarding HIV and PrEP among both members of the couple, role of insurance and financing in decision-making, learning to manage and adhere to a treatment plan, and the need for providers to enhance knowledge and offer further support. Addressing barriers to safer conception strategies at multiple levels is needed to prevent HIV transmission within serodiscordant couples who desire children. Providers can play an important role in lowering these barriers through the use of multiple strategies

Solving Modal Equations of Motion with Initial Conditions Using MSC/NASTRAN DMAP

By utilizing MSC/NASTRAN DMAP (Direct Matrix Abstraction Program) in an existing NASA Lewis Research Center coupled loads methodology, solving modal equations of motion with initial conditions is possible using either coupled (Newmark-Beta) or uncoupled (exact mode superposition) integration available within module TRD1. Both the coupled and newly developed exact mode superposition methods have been used to perform transient analyses of various space systems. However, experience has shown that in most cases, significant time savings are realized when the equations of motion are integrated using the uncoupled solver instead of the coupled solver. Through the results of a real-world engineering analysis, advantages of using the exact mode superposition methodology are illustrated

The Spontaneous Culture Method for Studying the Non-Symbiotic Nitrogen Fixing Bacteria of the Soil

During the years which have elapsed since the discovery of the non-symbiotic nitrogen-fixing bacteria there have been extensive investigations on the characteristics and activities of this group of organisms. They have been found to be of great importance from the fertility standpoint, adding appreciable amounts of nitrogen to the soil annually where the conditions are favorable for their development. In many cases too, a correlation has been found between the ability of a soil to support a vigorous Azotobacter growth and its crop producing power