900 research outputs found
A method to determine the acoustical properties of locally and nonlocally reacting duct liners in grazing flow
The acoustical properties of locally and nonlocally reacting acoustical liners in grazing flow are described. The effect of mean flow and shear flow are considered as well as the application to rigid and limp bulk reacting materials. The axial wavenumber of the least attenuated mode in a flow duct is measured. The acoustical properties of duct liners is then deduced from the measured axial wavenumber and known flow profile and boundary conditions. This method is a natural extension of impedance-like measurements
Acoustic analysis of the propfan
A review of propeller noise prediction technology is presented. Two methods for the prediction of the noise from conventional and advanced propellers in forward flight are described. These methods are based on different time domain formulations. Brief descriptions of the computer algorithms based on these formulations are given. The output of the programs (the acoustic pressure signature) was Fourier analyzed to get the acoustic pressure spectrum. The main difference between the two programs is that one can handle propellers with supersonic tip speed while the other is for subsonic tip speed propellers. Comparisons of the calculated and measured acoustic data for a conventional and an advanced propeller show good agreement in general
Lattice Boltzmann versus Molecular Dynamics simulation of nano-hydrodynamic flows
A fluid flow in a simple dense liquid, passing an obstacle in a
two-dimensional thin film geometry, is simulated by Molecular Dynamics (MD)
computer simulation and compared to results of Lattice Boltzmann (LB)
simulations. By the appropriate mapping of length and time units from LB to MD,
the velocity field as obtained from MD is quantitatively reproduced by LB. The
implications of this finding for prospective LB-MD multiscale applications are
discussed.Comment: 4 pages, 4 figure
Lattice Boltzmann models for non-ideal fluids with arrested phase-separation
The effects of mid-range repulsion in Lattice Boltzmann models on the
coalescence/breakup behaviour of single-component, non-ideal fluids are
investigated. It is found that mid-range repulsive interactions allow the
formation of spray-like, multi-droplet configurations, with droplet size
directly related to the strength of the repulsive interaction. The simulations
show that just a tiny ten-percent of mid-range repulsive pseudo-energy can
boost the surface/volume ratio of the phase- separated fluid by nearly two
orders of magnitude. Drawing upon a formal analogy with magnetic Ising systems,
a pseudo-potential energy is defined, which is found to behave like a
quasi-conserved quantity for most of the time-evolution. This offers a useful
quantitative indicator of the stability of the various configurations, thus
helping the task of their interpretation and classification. The present
approach appears to be a promising tool for the computational modelling of
complex flow phenomena, such as atomization, spray formation and
micro-emulsions, break-up phenomena and possibly glassy-like systems as well.Comment: 12 pages, 9 figure
Nanoflows through disordered media: a joint Lattice Boltzmann and Molecular Dynamics investigation
We investigate nanoflows through dilute disordered media by means of joint
lattice Boltzmann (LB) and molecular dynamics (MD) simulations -- when the size
of the obstacles is comparable to the size of the flowing particles -- for
randomly located spheres and for a correlated particle-gel. In both cases at
sufficiently low solid fraction, , LB and MD provide similar values
of the permeability. However, for , MD shows that molecular size
effects lead to a decrease of the permeability, as compared to the
Navier-Stokes predictions. For gels, the simulations highlights a surplus of
permeability, which can be accommodated within a rescaling of the effective
radius of the gel monomers.Comment: 4 pages, 4 figure
Chemical efficiency of reactive microflows with heterogeneus catalysis: a lattice Boltzmann study
We investigate the effects of geometrical micro-irregularities on the
conversion efficiency of reactive flows in narrow channels of millimetric size.
Three-dimensional simulations, based upon a Lattice-Boltzmann-Lax-Wendroff
code, indicate that periodic micro-barriers may have an appreciable effect on
the effective reaction efficiency of the device. Once extrapolated to
macroscopic scales, these effects can result in a sizeable increase of the
overall reaction efficiency.Comment: 12 pages, 12 figure
Lattice Boltzmann simulations of a viscoelastic shear-thinning fluid
We present a hybrid lattice Boltzmann algorithm for the simulation of flow
glass-forming fluids, characterized by slow structural relaxation, at the level
of the Navier-Stokes equation. The fluid is described in terms of a nonlinear
integral constitutive equation, relating the stress tensor locally to the
history of flow. As an application, we present results for an integral
nonlinear Maxwell model that combines the effects of (linear) viscoelasticity
and (nonlinear) shear thinning. We discuss the transient dynamics of
velocities, shear stresses, and normal stress differences in planar
pressure-driven channel flow, after switching on (startup) and off (cessation)
of the driving pressure. This transient dynamics depends nontrivially on the
channel width due to an interplay between hydrodynamic momentum diffusion and
slow structural relaxation
Modern Code Reviews: Preliminary Results of an Analysis of the State of the Art with Respect to the Role Played by Human Factors
Modern Code Reviewing has shown to be an effective mechanism to identify bugs in the code; however,
given their intrinsic subjectivity, they can be significantly affected by human factors such as interpersonal
relationships. This paper focuses on exploring such issues, with specific attention to social iterations and
personal factors. Future work includes experimental evaluations to verify the research hypothesis related to
improving the quality of the process under the study
Thermal and hydrodynamic effects in the ordering of lamellar fluids
Phase separation in a complex fluid with lamellar order has been studied in
the case of cold thermal fronts propagating diffusively from external walls.
The velocity hydrodynamic modes are taken into account by coupling the
convection-diffusion equation for the order parameter to a generalised
Navier-Stokes equation. The dynamical equations are simulated by implementing a
hybrid method based on a lattice Boltzmann algorithm coupled to finite
difference schemes. Simulations show that the ordering process occurs with
morphologies depending on the speed of the thermal fronts or, equivalently, on
the value of the thermal conductivity {\xi}. At large value of {\xi}, as in
instantaneous quenching, the system is frozen in entangled configurations at
high viscosity while consists of grains with well ordered lamellae at low
viscosity. By decreasing the value of {\xi}, a regime with very ordered
lamellae parallel to the thermal fronts is found. At very low values of {\xi}
the preferred orientation is perpendicular to the walls in d = 2, while
perpendicular order is lost moving far from the walls in d = 3.Comment: 8 pages, 3 figures. Accepted for publication in Phil. Trans. of Royal
Soc, Ser
- …