Orbital and Spin Parameter Variations of Partial Eclipsing Low Mass X-ray Binary X 1822-371

We report our measurements for orbital and spin parameters of X 1822-371 using its X-ray partial eclipsing profile and pulsar timing from data collected by the Rossi X-ray Timing Explorer (RXTE). Four more X-ray eclipse times obtained by the RXTE 2011 observations were combined with historical records to trace evolution of orbital period. We found that a cubic ephemeris likely better describes evolution of the X-ray eclipse times during a time span of about 34 years with a marginal second order derivative of $ddot{P}_{orb}=(-1.05 pm 0.59) imes 10^{-19}$ s$^{-1}$. Using the pulse arrival time delay technique, the orbital and spin parameters were obtained from RXTE observations from 1998 to 2011. The detected pulse periods show that the neutron star in X 1822-371 is continuously spun-up with a rate of $dot{P}_{s}=(-2.6288 pm 0.0095) imes 10^{-12}$ s s$^{-1}$. Evolution of the epoch of the mean longitude $l=pi /2$ (i.e. $T_{pi / 2}$) gives an orbital period derivative value consistent with that obtained from the quadratic ephemeris evaluated by the X-ray eclipse but the detected $T_{pi / 2}$ values are significantly and systematically earlier than the corresponding expected X-ray eclipse times by $90 pm 11$ s. This deviation is probably caused by asymmetric X-ray emissions. We also attempted to constrain the mass and radius of the neutron star using the spin period change rate and concluded that the intrinsic luminosity of X 1822-371 is likely more than $10^{38}$ ergs s$^{-1}$.postprin

Rheological transitions in semi-solid alloys: in-situ imaging and LBM-DEM simulations

Rheological transitions from suspension flow to granular deformation and shear cracking are investigated in equiaxed-globular semi-solid alloys by combining synchrotron radiography experiments with coupled lattice Boltzmann method, discrete element method (LBM-DEM) simulations. The experiments enabled a deformation mechanism map to be plotted as a function of solid fraction and shear rate, including a rate dependence for the transition from net-contraction to net-dilation, and for the initiation of shear cracking. The LBM-DEM simulations are in quantitative agreement with the experiments, both in terms of the strain fields in individual experiments and the deformation mechanism map from all experiments. The simulations are used to explore the factors affecting the shear rate dependence of the volumetric strain and transitions. The simulations further show that shear cracking is caused by a local liquid pressure drop due to unfed dilatancy, and the cracking location and its solid fraction and shear rate dependence were reproduced in the simulations using a criterion that cracking occurs when the local liquid pressure drops below a critical value

Cathelicidin suppresses lipid accumulation and hepatic steatosis by inhibition of the CD36 receptor.

Background and objectivesObesity is a global epidemic which increases the risk of the metabolic syndrome. Cathelicidin (LL-37 and mCRAMP) is an antimicrobial peptide with an unknown role in obesity. We hypothesize that cathelicidin expression correlates with obesity and modulates fat mass and hepatic steatosis.Materials and methodsMale C57BL/6 J mice were fed a high-fat diet. Streptozotocin was injected into mice to induce diabetes. Experimental groups were injected with cathelicidin and CD36 overexpressing lentiviruses. Human mesenteric fat adipocytes, mouse 3T3-L1 differentiated adipocytes and human HepG2 hepatocytes were used in the in vitro experiments. Cathelicidin levels in non-diabetic, prediabetic and type II diabetic patients were measured by enzyme-linked immunosorbent assay.ResultsLentiviral cathelicidin overexpression reduced hepatic steatosis and decreased the fat mass of high-fat diet-treated diabetic mice. Cathelicidin overexpression reduced mesenteric fat and hepatic fatty acid translocase (CD36) expression that was reversed by lentiviral CD36 overexpression. Exposure of adipocytes and hepatocytes to cathelicidin significantly inhibited CD36 expression and reduced lipid accumulation. Serum cathelicidin protein levels were significantly increased in non-diabetic and prediabetic patients with obesity, compared with non-diabetic patients with normal body mass index (BMI) values. Prediabetic patients had lower serum cathelicidin protein levels than non-diabetic subjects.ConclusionsCathelicidin inhibits the CD36 fat receptor and lipid accumulation in adipocytes and hepatocytes, leading to a reduction of fat mass and hepatic steatosis in vivo. Circulating cathelicidin levels are associated with increased BMI. Our results demonstrate that cathelicidin modulates the development of obesity

Al8Mn5 particle settling and interactions with oxide films in liquid AZ91 magnesium alloys

Al8Mn5 particles form as primary solidification phases in Mg-Al-based alloys and are important for ensuring adequate corrosion resistance. However, excessive Al8Mn5 formation above the α-Mg liquidus temperature can lead to sludge formation, and the clustering of Al8Mn5 particles on oxide films can generate deleterious casting defects. Here, we use analytical SEM and real-time synchrotron x-ray radiography to study Al8Mn5 particle settling, the formation of a sludge layer, and the mechanism of Al8Mn5 clustering on oxides in AZ91 containing two Fe levels. It is shown that settling Al8Mn5 can become trapped in entrained oxide and that new Al8Mn5 particles also seem to nucleate on oxide films. On cooling, these Al8Mn5 particles continue to grow, creating large Al8Mn5 clusters

Continuous variable quantum key distribution with two-mode squeezed states

Quantum key distribution (QKD) enables two remote parties to grow a shared key which they can use for unconditionally secure communication [1]. The applicable distance of a QKD protocol depends on the loss and the excess noise of the connecting quantum channel [2-10]. Several QKD schemes based on coherent states and continuous variable (CV) measurements are resilient to high loss in the channel, but strongly affected by small amounts of channel excess noise [2-6]. Here we propose and experimentally address a CV QKD protocol which uses fragile squeezed states combined with a large coherent modulation to greatly enhance the robustness to channel noise. As a proof of principle we experimentally demonstrate that the resulting QKD protocol can tolerate more noise than the benchmark set by the ideal CV coherent state protocol. Our scheme represents a very promising avenue for extending the distance for which secure communication is possible.Comment: 8 pages, 5 figure

Leg disorders in broiler chickens : prevalence, risk factors and prevention

Broiler (meat) chickens have been subjected to intense genetic selection. In the past 50 years, broiler growth rates have increased by over 300% (from 25 g per day to 100 g per day). There is growing societal concern that many broiler chickens have impaired locomotion or are even unable to walk. Here we present the results of a comprehensive survey of commercial flocks which quantifies the risk factors for poor locomotion in broiler chickens.We assessed the walking ability of 51,000 birds, representing 4.8 million birds within 176 flocks.We also obtained information on approximately 150 different management factors associated with each flock. At a mean age of 40 days, over 27.6% of birds in our study showed poor locomotion and 3.3% were almost unable to walk. The high prevalence of poor locomotion occurred despite culling policies designed to remove severely lame birds from flocks. We show that the primary risk factors associated with impaired locomotion and poor leg health are those specifically associated with rate of growth. Factors significantly associated with high gait score included the age of the bird (older birds), visit (second visit to same flock), bird genotype, not feeding whole wheat, a shorter dark period during the day, higher stocking density at the time of assessment, no use of antibiotic, and the use of intact feed pellets. The welfare implications are profound. Worldwide approximately 261010 broilers are reared within similar husbandry systems.We identify a range of management factors that could be altered to reduce leg health problems, but implementation of these changes would be likely to reduce growth rate and production. A debate on the sustainability of current practice in the production of this important food source is required

Shift Work Is Not Associated with High Blood Pressure or Prevalence of Hypertension

Background: Working mostly at night has been suggested to be associated with upset of chronobiological rhythms and high blood pressure, but the evidence from epidemiological studies is weak. Methods: In a cross-sectional survey, we evaluated the association between shift work and blood pressure, pre-hypertension and hypertension. In total, 493 nurses, nurse technicians and assistants, were selected at random in a large general hospital setting. Hypertension was diagnosed by the mean of four automatic blood pressure readings $140/ 90 mmHg or use of blood pressure lowering agents, and pre-hypertension by systolic blood pressure$120–139 or diastolic blood pressure $80–89 mmHg. Risk factors for hypertension were evaluated by a standardized questionnaire and anthropometric measurements. The association between the shift of work and blood pressure, pre-hypertension and hypertension was explored using univariate and multivariate analyses that controlled for risk factors for hypertension by covariance analysis and modified Poisson regression. Results: The mean age of the participants was 34.369.4 years and 88.2 % were women. Night shift workers were older, more frequently married or divorced, and less educated. The prevalence of hypertension in the whole sample was 16%, and 28% had pre-hypertension. Blood pressure (after adjustment for confounding) was not different in day and night shift workers. The prevalence of hypertension and pre-hypertension by shift work was not different in the univariate analysis and afte

Carotid Artery Intima-Media Thickness, Carotid Plaque and Coronary Heart Disease and Stroke in Chinese

Background: Our aim was to prospectively investigate the association between carotid artery intima-media thickness (IMT) as well as carotid plaque and incidence of coronary heart disease (CHD) and stroke in Chinese, among whom data are limited. Methods and Findings: We conducted a community-based cohort study composed of 2190 participants free of cardiovascular disease at baseline in one community. During a median 10.5-year follow up, we documented 68 new cases of coronary heart disease and 94 cases of stroke. The multivariate relative risks (RRs) associated with a change of 1 standard deviation of maximal common carotid IMT were 1.38 (95% confidence interval [CI], 1.12–1.70) for CHD and 1.47 (95% CI, 1.28–1.69) for stroke. The corresponding RRs with internal carotid IMT were 1.47 (95% CI, 1.21–1.79) for CHD and 1.52 (95% CI, 1.31–1.76) for stroke. Carotid plaque measured by the degree of diameter stenosis was also significantly associated with increased risk of CHD (p for trend<0.0001) and stroke (p for trend<0.0001). However, these associations were largely attenuated when adjusting for IMT measurements. Conclusions: This prospective study indicates a significant association between carotid IMT and incidence of CHD and stroke in Chinese adults. These measurements may be useful for cardiovascular risk assessment and stratification in Chinese

Bidirectional lipid droplet velocities are controlled by differential binding strengths of HCV Core DII protein

Host cell lipid droplets (LD) are essential in the hepatitis C virus (HCV) life cycle and are targeted by the viral capsid core protein. Core-coated LDs accumulate in the perinuclear region and facilitate viral particle assembly, but it is unclear how mobility of these LDs is directed by core. Herein we used two-photon fluorescence, differential interference contrast imaging, and coherent anti-Stokes Raman scattering microscopies, to reveal novel core-mediated changes to LD dynamics. Expression of core protein’s lipid binding domain II (DII-core) induced slower LD speeds, but did not affect directionality of movement on microtubules. Modulating the LD binding strength of DII-core further impacted LD mobility, revealing the temporal effects of LD-bound DII-core. These results for DII-core coated LDs support a model for core-mediated LD localization that involves core slowing down the rate of movement of LDs until localization at the perinuclear region is accomplished where LD movement ceases. The guided localization of LDs by HCV core protein not only is essential to the viral life cycle but also poses an interesting target for the development of antiviral strategies against HCV

Prospects for the Improvement of Energy Performance in Agroindustry Using Phase Change Materials

This work was partially supported by the Fundação para a Ciência e Tecnologia, UIDB/00066/2020 (CTS – Center of Technology and Systems).The use of Phase Change Materials (PCMs), able to store latent heat, represents an opportunity to improve energy efficiency in the agroindustry by means of thermal energy storage. PCMs provide higher energy density then sensible heat storage mediums, thus paving the way to multiple applications, like supporting the integration of renewables or allowing for new storage architectures, decentralized and directly installed in the chain production equipment, creating e.g. the opportunity to recover and value low-grade operational heat sub-products. Such new and decentralized architecture, not currently applied in agroindustry, is proposed in this work. A chocolate tempering machine using an organic PCM is conceived and analyzed using ANSYS Fluent software for computational fluid dynamics simulations, comparing the main aspects in the storage capacity and discharging process with a conventional sensitive heat storage solution that uses water. PCMs allows improving the stored energy, keeping the chocolate in the working temperature after being tempered for more than four times longer than using only hot water. If the PCMs are charged by renewables, the self-consumption ratio can be improved while providing energy flexibility to the user.authorsversionpublishe