118 research outputs found
Development of an Understanding of Reactive Mercury in Ambient Air: A Review
This review focuses on providing the history of measurement efforts to quantify and characterize the compounds of reactive mercury (RM), and the current status of measurement methods and knowledge. RM collectively represents gaseous oxidized mercury (GOM) and that bound to particles. The presence of RM was first recognized through measurement of coal-fired power plant emissions. Once discovered, researchers focused on developing methods for measuring RM in ambient air. First, tubular KCl-coated denuders were used for stack gas measurements, followed by mist chambers and annular denuders for ambient air measurements. For ~15 years, thermal desorption of an annular KCl denuder in the Tekran® speciation system was thought to be the gold standard for ambient GOM measurements. Research over the past ~10 years has shown that the KCl denuder does not collect GOM compounds with equal efficiency, and there are interferences with collection. Using a membrane-based system and an automated system—the Detector for Oxidized mercury System (DOHGS)—concentrations measured with the KCl denuder in the Tekran speciation system underestimate GOM concentrations by 1.3 to 13 times. Using nylon membranes it has been demonstrated that GOM/RM chemistry varies across space and time, and that this depends on the oxidant chemistry of the air. Future work should focus on development of better surfaces for collecting GOM/RM compounds, analytical methods to characterize GOM/RM chemistry, and high-resolution, calibrated measurement systems
Volumes and bulk densities of forty asteroids from ADAM shape modeling
Disk-integrated photometric data of asteroids do not contain accurate
information on shape details or size scale. Additional data such as
disk-resolved images or stellar occultation measurements further constrain
asteroid shapes and allow size estimates. We aim to use all available
disk-resolved images of about forty asteroids obtained by the Near-InfraRed
Camera (Nirc2) mounted on the W.M. Keck II telescope together with the
disk-integrated photometry and stellar occultation measurements to determine
their volumes. We can then use the volume, in combination with the known mass,
to derive the bulk density. We download and process all asteroid disk-resolved
images obtained by the Nirc2 that are available in the Keck Observatory Archive
(KOA). We combine optical disk-integrated data and stellar occultation profiles
with the disk-resolved images and use the All-Data Asteroid Modeling (ADAM)
algorithm for the shape and size modeling. Our approach provides constraints on
the expected uncertainty in the volume and size as well. We present shape
models and volume for 41 asteroids. For 35 asteroids, the knowledge of their
mass estimates from the literature allowed us to derive their bulk densities.
We clearly see a trend of lower bulk densities for primitive objects
(C-complex) than for S-complex asteroids. The range of densities in the
X-complex is large, suggesting various compositions. Moreover, we identified a
few objects with rather peculiar bulk densities, which is likely a hint of
their poor mass estimates. Asteroid masses determined from the Gaia astrometric
observations should further refine most of the density estimates.Comment: Accepted for publication in A&
The Kepler Follow-up Observation Program
The Kepler Mission was launched on March 6, 2009 to perform a photometric
survey of more than 100,000 dwarf stars to search for terrestrial-size planets
with the transit technique. Follow-up observations of planetary candidates
identified by detection of transit-like events are needed both for
identification of astrophysical phenomena that mimic planetary transits and for
characterization of the true planets and planetary systems found by Kepler. We
have developed techniques and protocols for detection of false planetary
transits and are currently conducting observations on 177 Kepler targets that
have been selected for follow-up. A preliminary estimate indicates that between
24% and 62% of planetary candidates selected for follow-up will turn out to be
true planets.Comment: 12 pages, submitted to the Astrophysical Journal Letter
Processing CCD Images to Detect Transits of Earth-Sized Planets: Maximizing Sensitivity While Achieving Reasonable Downlink Requirements
We have performed end-to-end laboratory and numerical simulations to demonstrate the capability of differential photometry under realistic operating conditions to detect transits of Earth-sized planets orbiting solar-like stars. Data acquisition and processing were conducted using the same methods planned for the proposed Kepler Mission. These included performing aperture photometry on large-format CCD images of an artificial star fields obtained without a shutter at a readout rate of 1 megapixel/sec, detecting and removing cosmic rays from individual exposures and making the necessary corrections for nonlinearity and shutterless operation in the absence of darks. We will discuss the image processing tasks performed `on-board' the simulated spacecraft, which yielded raw photometry and ancillary data used to monitor and correct for systematic effects, and the data processing and analysis tasks conducted to obtain lightcurves from the raw data and characterize the detectability of transits. The laboratory results are discussed along with the results of a numerical simulation carried out in parallel with the laboratory simulation. These two simulations demonstrate that a system-level differential photometric precision of 10-5 on five- hour intervals can be achieved under realistic conditions
Recommended from our members
Kepler-4B: A Hot Neptune-Like Planet of A G0 Star Near Main-Sequence Turnoff
Early time-series photometry from NASA's Kepler spacecraft has revealed a planet transiting the star we term Kepler-4, at R.A. = 19(h)02(m)27.(s)68, delta = +50 degrees 08'08 '' 7. The planet has an orbital period of 3.213 days and shows transits with a relative depth of 0.87 x 10(-3) and a duration of about 3.95 hr. Radial velocity (RV) measurements from the Keck High Resolution Echelle Spectrometer show a reflex Doppler signal of 9.3(-1.9)(+1.1) m s(-1), consistent with a low-eccentricity orbit with the phase expected from the transits. Various tests show no evidence for any companion star near enough to affect the light curve or the RVs for this system. From a transit-based estimate of the host star's mean density, combined with analysis of high-resolution spectra, we infer that the host star is near turnoff from the main sequence, with estimated mass and radius of 1.223(-0.091)(+0.053) M(circle dot) and 1.487(-0.084)(+0.071) R(circle dot).We estimate the planet mass and radius to be {M(P), R(P)} = {24.5 +/- 3.8 M(circle plus), 3.99 +/- 0.21 R(circle plus)}. The planet's density is near 1.9 g cm(-3); it is thus slightly denser and more massive than Neptune, but about the same size.W. M. Keck FoundationNASA's Science Mission DirectorateAstronom
Kepler Observations of Transiting Hot Compact Objects
Kepler photometry has revealed two unusual transiting companions orbiting an
early A-star and a late B-star. In both cases the occultation of the companion
is deeper than the transit. The occultation and transit with follow-up optical
spectroscopy reveal a 9400 K early A-star, KOI-74 (KIC 6889235), with a
companion in a 5.2 day orbit with a radius of 0.08 Rsun and a 10000 K late
B-star KOI-81 (KIC 8823868) that has a companion in a 24 day orbit with a
radius of 0.2 Rsun. We infer a temperature of 12250 K for KOI-74b and 13500 K
for KOI-81b.
We present 43 days of high duty cycle, 30 minute cadence photometry, with
models demonstrating the intriguing properties of these object, and speculate
on their nature.Comment: 12 pages, 3 figures, submitted to ApJL (updated to correct KOI74
lightcurve
Discovery of the Transiting Planet Kepler-5B
We present 44 days of high duty cycle, ultra precise photometry of the 13th magnitude star Kepler-5 (KIC 8191672, T(eff) = 6300 K, log g = 4.1), which exhibits periodic transits with a depth of 0.7%. Detailed modeling of the transit is consistent with a planetary companion with an orbital period of 3.548460 +/- 0.000032 days and a radius of 1.431(-0.052)(+0.041) R(J). Follow-up radial velocity measurements with the Keck HIRES spectrograph on nine separate nights demonstrate that the planet is more than twice as massive as Jupiter with a mass of 2.114(-0.059)(+0.056) M(J) and a mean density of 0.894 +/- 0.079 g cm(-3).NASA's Science Mission DirectorateAstronom
Kepler-7b: A Transiting Planet with Unusually Low Density
We report the discovery and confirmation of Kepler-7b, a transiting planet
with unusually low density. The mass is less than half that of Jupiter, Mp =
0.43 Mj, but the radius is fifty percent larger, Rp = 1.48 Rj. The resulting
density, 0.17 g/cc, is the second lowest reported so far for an extrasolar
planet. The orbital period is fairly long, P = 4.886 days, and the host star is
not much hotter than the Sun, Teff = 6000 K. However, it is more massive and
considerably larger than the sun, Mstar = 1.35 Msun and Rstar = 1.84 Rsun, and
must be near the end of its life on the Main Sequence.Comment: 19 pages, 3 figure
A Transiting Hot Jupiter Orbiting a Metal-Rich Star
We announce the discovery of Kepler-6b, a transiting hot Jupiter orbiting a
star with unusually high metallicity, [Fe/H] = +0.34 +/- 0.04. The planet's
mass is about 2/3 that of Jupiter, Mp = 0.67 Mj, and the radius is thirty
percent larger than that of Jupiter, Rp = 1.32 Rj, resulting in a density of
0.35 g/cc, a fairly typical value for such a planet. The orbital period is P =
3.235 days. The host star is both more massive than the Sun, Mstar = 1.21 Msun,
and larger than the Sun, Rstar = 1.39 Rsun.Comment: 12 pages, 2 figures, submitted to the Astrophysical Journal Letter
- …